1Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
2
3DECON (Display and Enhancement Controller) is the Display Controller for the
4Exynos7 series of SoCs which transfers the image data from a video memory
5buffer to an external LCD interface.
6
7Required properties:
8- compatible: value should be "samsung,exynos7-decon";
9
10- reg: physical base address and length of the DECON registers set.
11
12- interrupt-parent: should be the phandle of the decon controller's
13		parent interrupt controller.
14
15- interrupts: should contain a list of all DECON IP block interrupts in the
16		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
17		 format depends on the interrupt controller used.
18
19- interrupt-names: should contain the interrupt names: "fifo", "vsync",
20	"lcd_sys", in the same order as they were listed in the interrupts
21        property.
22
23- pinctrl-0: pin control group to be used for this controller.
24
25- pinctrl-names: must contain a "default" entry.
26
27- clocks: must include clock specifiers corresponding to entries in the
28         clock-names property.
29
30- clock-names: list of clock names sorted in the same order as the clocks
31               property. Must contain "pclk_decon0", "aclk_decon0",
32	       "decon0_eclk", "decon0_vclk".
33- i80-if-timings: timing configuration for lcd i80 interface support.
34
35Optional Properties:
36- samsung,power-domain: a phandle to DECON power domain node.
37- display-timings: timing settings for DECON, as described in document [1].
38		Can be used in case timings cannot be provided otherwise
39		or to override timings provided by the panel.
40
41[1]: Documentation/devicetree/bindings/display/display-timing.txt
42
43Example:
44
45SoC specific DT entry:
46
47	decon@13930000 {
48		compatible = "samsung,exynos7-decon";
49		interrupt-parent = <&combiner>;
50		reg = <0x13930000 0x1000>;
51		interrupt-names = "lcd_sys", "vsync", "fifo";
52		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
53		clocks = <&clock_disp PCLK_DECON_INT>,
54			 <&clock_disp ACLK_DECON_INT>,
55			 <&clock_disp SCLK_DECON_INT_ECLK>,
56			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
57		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
58				"decon0_vclk";
59		status = "disabled";
60	};
61
62Board specific DT entry:
63
64	decon@13930000 {
65		pinctrl-0 = <&lcd_clk &pwm1_out>;
66		pinctrl-names = "default";
67		status = "okay";
68	};
69