1* Clock bindings for Freescale i.MX27
2
3Required properties:
4- compatible: Should be "fsl,imx27-ccm"
5- reg: Address and length of the register set
6- interrupts: Should contain CCM interrupt
7- #clock-cells: Should be <1>
8
9The clock consumer should specify the desired clock by having the clock
10ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
11for the full list of i.MX27 clock IDs.
12
13Examples:
14	clks: ccm@10027000{
15		compatible = "fsl,imx27-ccm";
16		reg = <0x10027000 0x1000>;
17		#clock-cells = <1>;
18	};
19
20	uart1: serial@1000a000 {
21		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
22		reg = <0x1000a000 0x1000>;
23		interrupts = <20>;
24		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
25			 <&clks IMX27_CLK_PER1_GATE>;
26		clock-names = "ipg", "per";
27		status = "disabled";
28	};
29