1/* 2 * linux/mdio.h: definitions for MDIO (clause 45) transceivers 3 * Copyright 2006-2009 Solarflare Communications Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published 7 * by the Free Software Foundation, incorporated herein by reference. 8 */ 9 10#ifndef _UAPI__LINUX_MDIO_H__ 11#define _UAPI__LINUX_MDIO_H__ 12 13#include <linux/types.h> 14#include <linux/mii.h> 15 16/* MDIO Manageable Devices (MMDs). */ 17#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ 18 * Physical Medium Dependent */ 19#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ 20#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ 21#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ 22#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ 23#define MDIO_MMD_TC 6 /* Transmission Convergence */ 24#define MDIO_MMD_AN 7 /* Auto-Negotiation */ 25#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ 26#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ 27#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ 28 29/* Generic MDIO registers. */ 30#define MDIO_CTRL1 MII_BMCR 31#define MDIO_STAT1 MII_BMSR 32#define MDIO_DEVID1 MII_PHYSID1 33#define MDIO_DEVID2 MII_PHYSID2 34#define MDIO_SPEED 4 /* Speed ability */ 35#define MDIO_DEVS1 5 /* Devices in package */ 36#define MDIO_DEVS2 6 37#define MDIO_CTRL2 7 /* 10G control 2 */ 38#define MDIO_STAT2 8 /* 10G status 2 */ 39#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ 40#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ 41#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ 42#define MDIO_PKGID1 14 /* Package identifier */ 43#define MDIO_PKGID2 15 44#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ 45#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ 46#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ 47#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ 48#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ 49#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ 50#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ 51 52/* Media-dependent registers. */ 53#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ 54#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ 55#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. 56 * Lanes B-D are numbered 134-136. */ 57#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ 58#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ 59#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ 60#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ 61#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ 62#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ 63 64/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ 65#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ 66#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ 67#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ 68#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ 69#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ 70#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ 71 72/* Control register 1. */ 73/* Enable extended speed selection */ 74#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) 75/* All speed selection bits */ 76#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) 77#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX 78#define MDIO_CTRL1_LPOWER BMCR_PDOWN 79#define MDIO_CTRL1_RESET BMCR_RESET 80#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 81#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 82#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 83#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK 84#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK 85#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART 86#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE 87#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ 88#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ 89 90/* 10 Gb/s */ 91#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) 92/* 10PASS-TS/2BASE-TL */ 93#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) 94 95/* Status register 1. */ 96#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ 97#define MDIO_STAT1_LSTATUS BMSR_LSTATUS 98#define MDIO_STAT1_FAULT 0x0080 /* Fault */ 99#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ 100#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE 101#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT 102#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE 103#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ 104#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ 105 106/* Speed register. */ 107#define MDIO_SPEED_10G 0x0001 /* 10G capable */ 108#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ 109#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ 110#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ 111#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ 112#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ 113#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ 114 115/* Device present registers. */ 116#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) 117#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) 118#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) 119#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) 120#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) 121#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) 122#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) 123#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) 124#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) 125 126/* Control register 2. */ 127#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ 128#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ 129#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ 130#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ 131#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ 132#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ 133#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ 134#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ 135#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ 136#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ 137#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ 138#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ 139#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ 140#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ 141#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ 142#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ 143#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ 144#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ 145#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ 146#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ 147#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ 148#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ 149 150/* Status register 2. */ 151#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ 152#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ 153#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ 154#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ 155#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ 156#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ 157#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ 158#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ 159#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ 160#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ 161#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ 162#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ 163#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ 164#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ 165#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ 166#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ 167#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ 168#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ 169#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ 170#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ 171#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ 172 173/* Transmit disable register. */ 174#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ 175#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ 176#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ 177#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ 178#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ 179 180/* Receive signal detect register. */ 181#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ 182#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ 183#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ 184#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ 185#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ 186 187/* Extended abilities register. */ 188#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ 189#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ 190#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ 191#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ 192#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ 193#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ 194#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ 195#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ 196#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ 197 198/* PHY XGXS lane state register. */ 199#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 200#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 201#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 202#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 203#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 204 205/* PMA 10GBASE-T pair swap & polarity */ 206#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ 207#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ 208#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ 209#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ 210#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ 211#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ 212 213/* PMA 10GBASE-T TX power register. */ 214#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ 215 216/* PMA 10GBASE-T SNR registers. */ 217/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ 218#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 219#define MDIO_PMA_10GBT_SNR_MAX 127 220 221/* PMA 10GBASE-R FEC ability register. */ 222#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ 223#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ 224 225/* PCS 10GBASE-R/-T status register 1. */ 226#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ 227 228/* PCS 10GBASE-R/-T status register 2. */ 229#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff 230#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 231 232/* AN 10GBASE-T control register. */ 233#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ 234 235/* AN 10GBASE-T status register. */ 236#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ 237#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ 238#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ 239#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ 240#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ 241#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ 242#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ 243 244/* EEE Supported/Advertisement/LP Advertisement registers. 245 * 246 * EEE capability Register (3.20), Advertisement (7.60) and 247 * Link partner ability (7.61) registers have and can use the same identical 248 * bit masks. 249 */ 250#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ 251#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ 252/* Note: the two defines above can be potentially used by the user-land 253 * and cannot remove them now. 254 * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros 255 * using the previous ones (that can be considered obsolete). 256 */ 257#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ 258#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ 259#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ 260#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ 261#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ 262#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ 263 264/* LASI RX_ALARM control/status registers. */ 265#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ 266#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ 267#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ 268#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ 269#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ 270 271/* LASI TX_ALARM control/status registers. */ 272#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ 273#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ 274#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ 275#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ 276#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ 277#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ 278 279/* LASI control/status registers. */ 280#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ 281#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ 282#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ 283 284/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ 285 286#define MDIO_PHY_ID_C45 0x8000 287#define MDIO_PHY_ID_PRTAD 0x03e0 288#define MDIO_PHY_ID_DEVAD 0x001f 289#define MDIO_PHY_ID_C45_MASK \ 290 (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) 291 292static inline __u16 mdio_phy_id_c45(int prtad, int devad) 293{ 294 return MDIO_PHY_ID_C45 | (prtad << 5) | devad; 295} 296 297#endif /* _UAPI__LINUX_MDIO_H__ */ 298