1#ifndef _ARCH_MCI_H
2#define _ARCH_MCI_H
3
4/**
5 * struct s3c24xx_mci_pdata - sd/mmc controller platform data
6 * @no_wprotect: Set this to indicate there is no write-protect switch.
7 * @no_detect: Set this if there is no detect switch.
8 * @wprotect_invert: Invert the default sense of the write protect switch.
9 * @detect_invert: Invert the default sense of the write protect switch.
10 * @use_dma: Set to allow the use of DMA.
11 * @gpio_detect: GPIO number for the card detect line.
12 * @gpio_wprotect: GPIO number for the write protect line.
13 * @ocr_avail: The mask of the available power states, non-zero to use.
14 * @set_power: Callback to control the power mode.
15 *
16 * The @gpio_detect is used for card detection when @no_wprotect is unset,
17 * and the default sense is that 0 returned from gpio_get_value() means
18 * that a card is inserted. If @detect_invert is set, then the value from
19 * gpio_get_value() is inverted, which makes 1 mean card inserted.
20 *
21 * The driver will use @gpio_wprotect to signal whether the card is write
22 * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
23 * means the card is read/write, and 1 means read-only. The @wprotect_invert
24 * will invert the value returned from gpio_get_value().
25 *
26 * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
27 * to a non-zero value, otherwise the default of 3.2-3.4V is used.
28 */
29struct s3c24xx_mci_pdata {
30	unsigned int	no_wprotect:1;
31	unsigned int	no_detect:1;
32	unsigned int	wprotect_invert:1;
33	unsigned int	detect_invert:1;	/* set => detect active high */
34	unsigned int	use_dma:1;
35
36	unsigned int	gpio_detect;
37	unsigned int	gpio_wprotect;
38	unsigned long	ocr_avail;
39	void		(*set_power)(unsigned char power_mode,
40				     unsigned short vdd);
41};
42
43/**
44 * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
45 * @pdata: The platform data
46 *
47 * Copy the platform data supplied by @pdata so that this can be marked
48 * __initdata.
49 */
50extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
51
52#endif /* _ARCH_NCI_H */
53