1/* 2 * ipmi_smi.h 3 * 4 * MontaVista IPMI system management interface 5 * 6 * Author: MontaVista Software, Inc. 7 * Corey Minyard <minyard@mvista.com> 8 * source@mvista.com 9 * 10 * Copyright 2002 MontaVista Software Inc. 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License as published by the 14 * Free Software Foundation; either version 2 of the License, or (at your 15 * option) any later version. 16 * 17 * 18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 19 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 24 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 25 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 26 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 27 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 * 29 * You should have received a copy of the GNU General Public License along 30 * with this program; if not, write to the Free Software Foundation, Inc., 31 * 675 Mass Ave, Cambridge, MA 02139, USA. 32 */ 33 34#ifndef __LINUX_IPMI_SMI_H 35#define __LINUX_IPMI_SMI_H 36 37#include <linux/ipmi_msgdefs.h> 38#include <linux/proc_fs.h> 39#include <linux/platform_device.h> 40#include <linux/ipmi.h> 41 42struct device; 43 44/* This files describes the interface for IPMI system management interface 45 drivers to bind into the IPMI message handler. */ 46 47/* Structure for the low-level drivers. */ 48typedef struct ipmi_smi *ipmi_smi_t; 49 50/* 51 * Messages to/from the lower layer. The smi interface will take one 52 * of these to send. After the send has occurred and a response has 53 * been received, it will report this same data structure back up to 54 * the upper layer. If an error occurs, it should fill in the 55 * response with an error code in the completion code location. When 56 * asynchronous data is received, one of these is allocated, the 57 * data_size is set to zero and the response holds the data from the 58 * get message or get event command that the interface initiated. 59 * Note that it is the interfaces responsibility to detect 60 * asynchronous data and messages and request them from the 61 * interface. 62 */ 63struct ipmi_smi_msg { 64 struct list_head link; 65 66 long msgid; 67 void *user_data; 68 69 int data_size; 70 unsigned char data[IPMI_MAX_MSG_LENGTH]; 71 72 int rsp_size; 73 unsigned char rsp[IPMI_MAX_MSG_LENGTH]; 74 75 /* Will be called when the system is done with the message 76 (presumably to free it). */ 77 void (*done)(struct ipmi_smi_msg *msg); 78}; 79 80struct ipmi_smi_handlers { 81 struct module *owner; 82 83 /* The low-level interface cannot start sending messages to 84 the upper layer until this function is called. This may 85 not be NULL, the lower layer must take the interface from 86 this call. */ 87 int (*start_processing)(void *send_info, 88 ipmi_smi_t new_intf); 89 90 /* 91 * Get the detailed private info of the low level interface and store 92 * it into the structure of ipmi_smi_data. For example: the 93 * ACPI device handle will be returned for the pnp_acpi IPMI device. 94 */ 95 int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data); 96 97 /* Called to enqueue an SMI message to be sent. This 98 operation is not allowed to fail. If an error occurs, it 99 should report back the error in a received message. It may 100 do this in the current call context, since no write locks 101 are held when this is run. Message are delivered one at 102 a time by the message handler, a new message will not be 103 delivered until the previous message is returned. */ 104 void (*sender)(void *send_info, 105 struct ipmi_smi_msg *msg); 106 107 /* Called by the upper layer to request that we try to get 108 events from the BMC we are attached to. */ 109 void (*request_events)(void *send_info); 110 111 /* Called by the upper layer when some user requires that the 112 interface watch for events, received messages, watchdog 113 pretimeouts, or not. Used by the SMI to know if it should 114 watch for these. This may be NULL if the SMI does not 115 implement it. */ 116 void (*set_need_watch)(void *send_info, bool enable); 117 118 /* Called when the interface should go into "run to 119 completion" mode. If this call sets the value to true, the 120 interface should make sure that all messages are flushed 121 out and that none are pending, and any new requests are run 122 to completion immediately. */ 123 void (*set_run_to_completion)(void *send_info, bool run_to_completion); 124 125 /* Called to poll for work to do. This is so upper layers can 126 poll for operations during things like crash dumps. */ 127 void (*poll)(void *send_info); 128 129 /* Enable/disable firmware maintenance mode. Note that this 130 is *not* the modes defined, this is simply an on/off 131 setting. The message handler does the mode handling. Note 132 that this is called from interrupt context, so it cannot 133 block. */ 134 void (*set_maintenance_mode)(void *send_info, bool enable); 135 136 /* Tell the handler that we are using it/not using it. The 137 message handler get the modules that this handler belongs 138 to; this function lets the SMI claim any modules that it 139 uses. These may be NULL if this is not required. */ 140 int (*inc_usecount)(void *send_info); 141 void (*dec_usecount)(void *send_info); 142}; 143 144struct ipmi_device_id { 145 unsigned char device_id; 146 unsigned char device_revision; 147 unsigned char firmware_revision_1; 148 unsigned char firmware_revision_2; 149 unsigned char ipmi_version; 150 unsigned char additional_device_support; 151 unsigned int manufacturer_id; 152 unsigned int product_id; 153 unsigned char aux_firmware_revision[4]; 154 unsigned int aux_firmware_revision_set : 1; 155}; 156 157#define ipmi_version_major(v) ((v)->ipmi_version & 0xf) 158#define ipmi_version_minor(v) ((v)->ipmi_version >> 4) 159 160/* Take a pointer to a raw data buffer and a length and extract device 161 id information from it. The first byte of data must point to the 162 netfn << 2, the data should be of the format: 163 netfn << 2, cmd, completion code, data 164 as normally comes from a device interface. */ 165static inline int ipmi_demangle_device_id(const unsigned char *data, 166 unsigned int data_len, 167 struct ipmi_device_id *id) 168{ 169 if (data_len < 9) 170 return -EINVAL; 171 if (data[0] != IPMI_NETFN_APP_RESPONSE << 2 || 172 data[1] != IPMI_GET_DEVICE_ID_CMD) 173 /* Strange, didn't get the response we expected. */ 174 return -EINVAL; 175 if (data[2] != 0) 176 /* That's odd, it shouldn't be able to fail. */ 177 return -EINVAL; 178 179 data += 3; 180 data_len -= 3; 181 id->device_id = data[0]; 182 id->device_revision = data[1]; 183 id->firmware_revision_1 = data[2]; 184 id->firmware_revision_2 = data[3]; 185 id->ipmi_version = data[4]; 186 id->additional_device_support = data[5]; 187 if (data_len >= 11) { 188 id->manufacturer_id = (data[6] | (data[7] << 8) | 189 (data[8] << 16)); 190 id->product_id = data[9] | (data[10] << 8); 191 } else { 192 id->manufacturer_id = 0; 193 id->product_id = 0; 194 } 195 if (data_len >= 15) { 196 memcpy(id->aux_firmware_revision, data+11, 4); 197 id->aux_firmware_revision_set = 1; 198 } else 199 id->aux_firmware_revision_set = 0; 200 201 return 0; 202} 203 204/* Add a low-level interface to the IPMI driver. Note that if the 205 interface doesn't know its slave address, it should pass in zero. 206 The low-level interface should not deliver any messages to the 207 upper layer until the start_processing() function in the handlers 208 is called, and the lower layer must get the interface from that 209 call. */ 210int ipmi_register_smi(struct ipmi_smi_handlers *handlers, 211 void *send_info, 212 struct ipmi_device_id *device_id, 213 struct device *dev, 214 unsigned char slave_addr); 215 216/* 217 * Remove a low-level interface from the IPMI driver. This will 218 * return an error if the interface is still in use by a user. 219 */ 220int ipmi_unregister_smi(ipmi_smi_t intf); 221 222/* 223 * The lower layer reports received messages through this interface. 224 * The data_size should be zero if this is an asynchronous message. If 225 * the lower layer gets an error sending a message, it should format 226 * an error response in the message response. 227 */ 228void ipmi_smi_msg_received(ipmi_smi_t intf, 229 struct ipmi_smi_msg *msg); 230 231/* The lower layer received a watchdog pre-timeout on interface. */ 232void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf); 233 234struct ipmi_smi_msg *ipmi_alloc_smi_msg(void); 235static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg) 236{ 237 msg->done(msg); 238} 239 240/* Allow the lower layer to add things to the proc filesystem 241 directory for this interface. Note that the entry will 242 automatically be dstroyed when the interface is destroyed. */ 243int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, 244 const struct file_operations *proc_ops, 245 void *data); 246 247#endif /* __LINUX_IPMI_SMI_H */ 248