1#
2# Serial device configuration
3#
4
5if TTY
6
7menu "Serial drivers"
8	depends on HAS_IOMEM
9
10config SERIAL_EARLYCON
11	bool
12	help
13	  Support for early consoles with the earlycon parameter. This enables
14	  the console before standard serial driver is probed. The console is
15	  enabled when early_param is processed.
16
17source "drivers/tty/serial/8250/Kconfig"
18
19comment "Non-8250 serial port support"
20
21config SERIAL_AMBA_PL010
22	tristate "ARM AMBA PL010 serial port support"
23	depends on ARM_AMBA
24	select SERIAL_CORE
25	help
26	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
27	  an Integrator/AP or Integrator/PP2 platform, or if you have a
28	  Cirrus Logic EP93xx CPU, say Y or M here.
29
30	  If unsure, say N.
31
32config SERIAL_AMBA_PL010_CONSOLE
33	bool "Support for console on AMBA serial port"
34	depends on SERIAL_AMBA_PL010=y
35	select SERIAL_CORE_CONSOLE
36	---help---
37	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
38	  console (the system console is the device which receives all kernel
39	  messages and warnings and which allows logins in single user mode).
40
41	  Even if you say Y here, the currently visible framebuffer console
42	  (/dev/tty0) will still be used as the system console by default, but
43	  you can alter that using a kernel command line option such as
44	  "console=ttyAM0". (Try "man bootparam" or see the documentation of
45	  your boot loader (lilo or loadlin) about how to pass options to the
46	  kernel at boot time.)
47
48config SERIAL_AMBA_PL011
49	tristate "ARM AMBA PL011 serial port support"
50	depends on ARM_AMBA
51	select SERIAL_CORE
52	help
53	  This selects the ARM(R) AMBA(R) PrimeCell PL011 UART.  If you have
54	  an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
55	  here.
56
57	  If unsure, say N.
58
59config SERIAL_AMBA_PL011_CONSOLE
60	bool "Support for console on AMBA serial port"
61	depends on SERIAL_AMBA_PL011=y
62	select SERIAL_CORE_CONSOLE
63	select SERIAL_EARLYCON
64	---help---
65	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
66	  console (the system console is the device which receives all kernel
67	  messages and warnings and which allows logins in single user mode).
68
69	  Even if you say Y here, the currently visible framebuffer console
70	  (/dev/tty0) will still be used as the system console by default, but
71	  you can alter that using a kernel command line option such as
72	  "console=ttyAMA0". (Try "man bootparam" or see the documentation of
73	  your boot loader (lilo or loadlin) about how to pass options to the
74	  kernel at boot time.)
75
76config SERIAL_EARLYCON_ARM_SEMIHOST
77	bool "Early console using ARM semihosting"
78	depends on ARM64 || ARM
79	select SERIAL_CORE
80	select SERIAL_CORE_CONSOLE
81	select SERIAL_EARLYCON
82	help
83	  Support for early debug console using ARM semihosting. This enables
84	  the console before standard serial driver is probed. This is enabled
85	  with "earlycon=smh" on the kernel command line. The console is
86	  enabled when early_param is processed.
87
88config SERIAL_SB1250_DUART
89	tristate "BCM1xxx on-chip DUART serial support"
90	depends on SIBYTE_SB1xxx_SOC=y
91	select SERIAL_CORE
92	default y
93	---help---
94	  Support for the asynchronous serial interface (DUART) included in
95	  the BCM1250 and derived System-On-a-Chip (SOC) devices.  Note that
96	  the letter D in DUART stands for "dual", which is how the device
97	  is implemented.  Depending on the SOC configuration there may be
98	  one or more DUARTs available of which all are handled.
99
100	  If unsure, say Y.  To compile this driver as a module, choose M here:
101	  the module will be called sb1250-duart.
102
103config SERIAL_SB1250_DUART_CONSOLE
104	bool "Support for console on a BCM1xxx DUART serial port"
105	depends on SERIAL_SB1250_DUART=y
106	select SERIAL_CORE_CONSOLE
107	default y
108	---help---
109	  If you say Y here, it will be possible to use a serial port as the
110	  system console (the system console is the device which receives all
111	  kernel messages and warnings and which allows logins in single user
112	  mode).
113
114	  If unsure, say Y.
115
116config SERIAL_ATMEL
117	bool "AT91 / AT32 on-chip serial port support"
118	depends on ARCH_AT91 || AVR32
119	select SERIAL_CORE
120	select SERIAL_MCTRL_GPIO
121	help
122	  This enables the driver for the on-chip UARTs of the Atmel
123	  AT91 and AT32 processors.
124
125config SERIAL_ATMEL_CONSOLE
126	bool "Support for console on AT91 / AT32 serial port"
127	depends on SERIAL_ATMEL=y
128	select SERIAL_CORE_CONSOLE
129	help
130	  Say Y here if you wish to use an on-chip UART on a Atmel
131	  AT91 or AT32 processor as the system console (the system
132	  console is the device which receives all kernel messages and
133	  warnings and which allows logins in single user mode).
134
135config SERIAL_ATMEL_PDC
136	bool "Support DMA transfers on AT91 / AT32 serial port"
137	depends on SERIAL_ATMEL
138	default y
139	help
140	  Say Y here if you wish to use the PDC to do DMA transfers to
141	  and from the Atmel AT91 / AT32 serial port. In order to
142	  actually use DMA transfers, make sure that the use_dma_tx
143	  and use_dma_rx members in the atmel_uart_data struct is set
144	  appropriately for each port.
145
146	  Note that break and error handling currently doesn't work
147	  properly when DMA is enabled. Make sure that ports where
148	  this matters don't use DMA.
149
150config SERIAL_ATMEL_TTYAT
151	bool "Install as device ttyATn instead of ttySn"
152	depends on SERIAL_ATMEL=y
153	help
154	  Say Y here if you wish to have the internal AT91 / AT32 UARTs
155	  appear as /dev/ttyATn (major 204, minor starting at 154)
156	  instead of the normal /dev/ttySn (major 4, minor starting at
157	  64). This is necessary if you also want other UARTs, such as
158	  external 8250/16C550 compatible UARTs.
159	  The ttySn nodes are legally reserved for the 8250 serial driver
160	  but are often misused by other serial drivers.
161
162	  To use this, you should create suitable ttyATn device nodes in
163	  /dev/, and pass "console=ttyATn" to the kernel.
164
165	  Say Y if you have an external 8250/16C550 UART.  If unsure, say N.
166
167config SERIAL_KGDB_NMI
168	bool "Serial console over KGDB NMI debugger port"
169	depends on KGDB_SERIAL_CONSOLE
170	help
171	  This special driver allows you to temporary use NMI debugger port
172	  as a normal console (assuming that the port is attached to KGDB).
173
174	  Unlike KDB's disable_nmi command, with this driver you are always
175	  able to go back to the debugger using KGDB escape sequence ($3#33).
176	  This is because this console driver processes the input in NMI
177	  context, and thus is able to intercept the magic sequence.
178
179	  Note that since the console interprets input and uses polling
180	  communication methods, for things like PPP you still must fully
181	  detach debugger port from the KGDB NMI (i.e. disable_nmi), and
182	  use raw console.
183
184	  If unsure, say N.
185
186config SERIAL_KS8695
187	bool "Micrel KS8695 (Centaur) serial port support"
188	depends on ARCH_KS8695
189	select SERIAL_CORE
190	help
191	  This selects the Micrel Centaur KS8695 UART.  Say Y here.
192
193config SERIAL_KS8695_CONSOLE
194	bool "Support for console on KS8695 (Centaur) serial port"
195	depends on SERIAL_KS8695=y
196	select SERIAL_CORE_CONSOLE
197	help
198	  Say Y here if you wish to use a KS8695 (Centaur) UART as the
199	  system console (the system console is the device which
200	  receives all kernel messages and warnings and which allows
201	  logins in single user mode).
202
203config SERIAL_MESON
204	tristate "Meson serial port support"
205	depends on ARCH_MESON
206	select SERIAL_CORE
207	help
208	  This enables the driver for the on-chip UARTs of the Amlogic
209	  MesonX processors.
210
211config SERIAL_MESON_CONSOLE
212	bool "Support for console on meson"
213	depends on SERIAL_MESON=y
214	select SERIAL_CORE_CONSOLE
215	help
216	  Say Y here if you wish to use a Amlogic MesonX UART as the
217	  system console (the system console is the device which
218	  receives all kernel messages and warnings and which allows
219	  logins in single user mode) as /dev/ttyAMLx.
220
221config SERIAL_CLPS711X
222	tristate "CLPS711X serial port support"
223	depends on ARCH_CLPS711X || COMPILE_TEST
224	select SERIAL_CORE
225	select SERIAL_MCTRL_GPIO if GPIOLIB
226	help
227	  This enables the driver for the on-chip UARTs of the Cirrus
228	  Logic EP711x/EP721x/EP731x processors.
229
230config SERIAL_CLPS711X_CONSOLE
231	bool "Support for console on CLPS711X serial port"
232	depends on SERIAL_CLPS711X=y
233	select SERIAL_CORE_CONSOLE
234	help
235	  Even if you say Y here, the currently visible virtual console
236	  (/dev/tty0) will still be used as the system console by default, but
237	  you can alter that using a kernel command line option such as
238	  "console=ttyCL1".
239
240config SERIAL_SAMSUNG
241	tristate "Samsung SoC serial support"
242	depends on PLAT_SAMSUNG || ARCH_EXYNOS
243	select SERIAL_CORE
244	help
245	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
246	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
247	  provide all of these ports, depending on how the serial port
248	  pins are configured.
249
250config SERIAL_SAMSUNG_UARTS_4
251	bool
252	depends on SERIAL_SAMSUNG
253	default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
254	help
255	  Internal node for the common case of 4 Samsung compatible UARTs
256
257config SERIAL_SAMSUNG_UARTS
258	int
259	depends on SERIAL_SAMSUNG
260	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
261	default 3
262	help
263	  Select the number of available UART ports for the Samsung S3C
264	  serial driver
265	
266config SERIAL_SAMSUNG_DEBUG
267	bool "Samsung SoC serial debug"
268	depends on SERIAL_SAMSUNG && DEBUG_LL
269	help
270	  Add support for debugging the serial driver. Since this is
271	  generally being used as a console, we use our own output
272	  routines that go via the low-level debug printascii()
273	  function.
274
275config SERIAL_SAMSUNG_CONSOLE
276	bool "Support for console on Samsung SoC serial port"
277	depends on SERIAL_SAMSUNG=y
278	select SERIAL_CORE_CONSOLE
279	select SERIAL_EARLYCON
280	help
281	  Allow selection of the S3C24XX on-board serial ports for use as
282	  an virtual console.
283
284	  Even if you say Y here, the currently visible virtual console
285	  (/dev/tty0) will still be used as the system console by default, but
286	  you can alter that using a kernel command line option such as
287	  "console=ttySACx". (Try "man bootparam" or see the documentation of
288	  your boot loader about how to pass options to the kernel at
289	  boot time.)
290
291config SERIAL_SIRFSOC
292        tristate "SiRF SoC Platform Serial port support"
293        depends on ARCH_SIRF
294        select SERIAL_CORE
295        help
296          Support for the on-chip UART on the CSR SiRFprimaII series,
297          providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
298          provide all of these ports, depending on how the serial port
299          pins are configured).
300
301config SERIAL_SIRFSOC_CONSOLE
302        bool "Support for console on SiRF SoC serial port"
303        depends on SERIAL_SIRFSOC=y
304        select SERIAL_CORE_CONSOLE
305        help
306          Even if you say Y here, the currently visible virtual console
307          (/dev/tty0) will still be used as the system console by default, but
308          you can alter that using a kernel command line option such as
309          "console=ttySiRFx". (Try "man bootparam" or see the documentation of
310          your boot loader about how to pass options to the kernel at
311          boot time.)
312
313config SERIAL_TEGRA
314	tristate "NVIDIA Tegra20/30 SoC serial controller"
315	depends on ARCH_TEGRA && TEGRA20_APB_DMA
316	select SERIAL_CORE
317	help
318	  Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
319	  providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
320	  provide all of these ports, depending on how the serial port
321	  are enabled). This driver uses the APB DMA to achieve higher baudrate
322	  and better performance.
323
324config SERIAL_MAX3100
325	tristate "MAX3100 support"
326	depends on SPI
327	select SERIAL_CORE
328	help
329	  MAX3100 chip support
330
331config SERIAL_MAX310X
332	tristate "MAX310X support"
333	depends on SPI_MASTER
334	select SERIAL_CORE
335	select REGMAP_SPI if SPI_MASTER
336	default n
337	help
338	  This selects support for an advanced UART from Maxim (Dallas).
339	  Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
340	  Each IC contains 128 words each of receive and transmit FIFO
341	  that can be controlled through I2C or high-speed SPI.
342
343	  Say Y here if you want to support this ICs.
344
345config SERIAL_DZ
346	bool "DECstation DZ serial driver"
347	depends on MACH_DECSTATION && 32BIT
348	select SERIAL_CORE
349	default y
350	---help---
351	  DZ11-family serial controllers for DECstations and VAXstations,
352	  including the DC7085, M7814, and M7819.
353
354config SERIAL_DZ_CONSOLE
355	bool "Support console on DECstation DZ serial driver"
356	depends on SERIAL_DZ=y
357	select SERIAL_CORE_CONSOLE
358	default y
359	---help---
360	  If you say Y here, it will be possible to use a serial port as the
361	  system console (the system console is the device which receives all
362	  kernel messages and warnings and which allows logins in single user
363	  mode).
364
365	  Note that the firmware uses ttyS3 as the serial console on
366	  DECstations that use this driver.
367
368	  If unsure, say Y.
369
370config SERIAL_ZS
371	tristate "DECstation Z85C30 serial support"
372	depends on MACH_DECSTATION
373	select SERIAL_CORE
374	default y
375	---help---
376	  Support for the Zilog 85C350 serial communications controller used
377	  for serial ports in newer DECstation systems.  These include the
378	  DECsystem 5900 and all models of the DECstation and DECsystem 5000
379	  systems except from model 200.
380
381	  If unsure, say Y.  To compile this driver as a module, choose M here:
382	  the module will be called zs.
383
384config SERIAL_ZS_CONSOLE
385	bool "Support for console on a DECstation Z85C30 serial port"
386	depends on SERIAL_ZS=y
387	select SERIAL_CORE_CONSOLE
388	default y
389	---help---
390	  If you say Y here, it will be possible to use a serial port as the
391	  system console (the system console is the device which receives all
392	  kernel messages and warnings and which allows logins in single user
393	  mode).
394
395	  Note that the firmware uses ttyS1 as the serial console on the
396	  Maxine and ttyS3 on the others using this driver.
397
398	  If unsure, say Y.
399
400config SERIAL_21285
401	tristate "DC21285 serial port support"
402	depends on FOOTBRIDGE
403	select SERIAL_CORE
404	help
405	  If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
406	  PCI bridge you can enable its onboard serial port by enabling this
407	  option.
408
409config SERIAL_21285_CONSOLE
410	bool "Console on DC21285 serial port"
411	depends on SERIAL_21285=y
412	select SERIAL_CORE_CONSOLE
413	help
414	  If you have enabled the serial port on the 21285 footbridge you can
415	  make it the console by answering Y to this option.
416
417	  Even if you say Y here, the currently visible virtual console
418	  (/dev/tty0) will still be used as the system console by default, but
419	  you can alter that using a kernel command line option such as
420	  "console=ttyFB". (Try "man bootparam" or see the documentation of
421	  your boot loader (lilo or loadlin) about how to pass options to the
422	  kernel at boot time.)
423
424config SERIAL_MPSC
425	bool "Marvell MPSC serial port support"
426	depends on MV64X60
427	select SERIAL_CORE
428	help
429	  Say Y here if you want to use the Marvell MPSC serial controller.
430
431config SERIAL_MPSC_CONSOLE
432	bool "Support for console on Marvell MPSC serial port"
433	depends on SERIAL_MPSC
434	select SERIAL_CORE_CONSOLE
435	help
436	  Say Y here if you want to support a serial console on a Marvell MPSC.
437
438config SERIAL_PXA
439	bool "PXA serial port support"
440	depends on ARCH_PXA || ARCH_MMP
441	select SERIAL_CORE
442	help
443	  If you have a machine based on an Intel XScale PXA2xx CPU you
444	  can enable its onboard serial ports by enabling this option.
445
446config SERIAL_PXA_CONSOLE
447	bool "Console on PXA serial port"
448	depends on SERIAL_PXA
449	select SERIAL_CORE_CONSOLE
450	help
451	  If you have enabled the serial port on the Intel XScale PXA
452	  CPU you can make it the console by answering Y to this option.
453
454	  Even if you say Y here, the currently visible virtual console
455	  (/dev/tty0) will still be used as the system console by default, but
456	  you can alter that using a kernel command line option such as
457	  "console=ttySA0". (Try "man bootparam" or see the documentation of
458	  your boot loader (lilo or loadlin) about how to pass options to the
459	  kernel at boot time.)
460
461config SERIAL_SA1100
462	bool "SA1100 serial port support"
463	depends on ARCH_SA1100
464	select SERIAL_CORE
465	help
466	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
467	  can enable its onboard serial port by enabling this option.
468	  Please read <file:Documentation/arm/SA1100/serial_UART> for further
469	  info.
470
471config SERIAL_SA1100_CONSOLE
472	bool "Console on SA1100 serial port"
473	depends on SERIAL_SA1100
474	select SERIAL_CORE_CONSOLE
475	help
476	  If you have enabled the serial port on the SA1100/SA1110 StrongARM
477	  CPU you can make it the console by answering Y to this option.
478
479	  Even if you say Y here, the currently visible virtual console
480	  (/dev/tty0) will still be used as the system console by default, but
481	  you can alter that using a kernel command line option such as
482	  "console=ttySA0". (Try "man bootparam" or see the documentation of
483	  your boot loader (lilo or loadlin) about how to pass options to the
484	  kernel at boot time.)
485
486config SERIAL_BFIN
487	tristate "Blackfin serial port support"
488	depends on BLACKFIN
489	select SERIAL_CORE
490	select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
491	help
492	  Add support for the built-in UARTs on the Blackfin.
493
494	  To compile this driver as a module, choose M here: the
495	  module is named bfin_uart.ko.
496
497config SERIAL_BFIN_CONSOLE
498	bool "Console on Blackfin serial port"
499	depends on SERIAL_BFIN=y
500	select SERIAL_CORE_CONSOLE
501
502choice
503	prompt "UART Mode"
504	depends on SERIAL_BFIN
505	default SERIAL_BFIN_DMA
506	help
507	  This driver supports the built-in serial ports of the Blackfin family
508	  of CPUs
509
510config SERIAL_BFIN_DMA
511	bool "DMA mode"
512	depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
513	help
514	  This driver works under DMA mode. If this option is selected, the
515	  blackfin simple dma driver is also enabled.
516
517config SERIAL_BFIN_PIO
518	bool "PIO mode"
519	help
520	  This driver works under PIO mode.
521
522endchoice
523
524config SERIAL_BFIN_UART0
525	bool "Enable UART0"
526	depends on SERIAL_BFIN
527	help
528	  Enable UART0
529
530config BFIN_UART0_CTSRTS
531	bool "Enable UART0 hardware flow control"
532	depends on SERIAL_BFIN_UART0
533	help
534	  Enable hardware flow control in the driver.
535
536config SERIAL_BFIN_UART1
537	bool "Enable UART1"
538	depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
539	help
540	  Enable UART1
541
542config BFIN_UART1_CTSRTS
543	bool "Enable UART1 hardware flow control"
544	depends on SERIAL_BFIN_UART1
545	help
546	  Enable hardware flow control in the driver.
547
548config SERIAL_BFIN_UART2
549	bool "Enable UART2"
550	depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
551	help
552	  Enable UART2
553
554config BFIN_UART2_CTSRTS
555	bool "Enable UART2 hardware flow control"
556	depends on SERIAL_BFIN_UART2
557	help
558	  Enable hardware flow control in the driver.
559
560config SERIAL_BFIN_UART3
561	bool "Enable UART3"
562	depends on SERIAL_BFIN && (BF54x)
563	help
564	  Enable UART3
565
566config BFIN_UART3_CTSRTS
567	bool "Enable UART3 hardware flow control"
568	depends on SERIAL_BFIN_UART3
569	help
570	  Enable hardware flow control in the driver.
571
572config SERIAL_IMX
573	tristate "IMX serial port support"
574	depends on ARCH_MXC
575	select SERIAL_CORE
576	select RATIONAL
577	help
578	  If you have a machine based on a Motorola IMX CPU you
579	  can enable its onboard serial port by enabling this option.
580
581config SERIAL_IMX_CONSOLE
582	bool "Console on IMX serial port"
583	depends on SERIAL_IMX=y
584	select SERIAL_CORE_CONSOLE
585	help
586	  If you have enabled the serial port on the Freescale IMX
587	  CPU you can make it the console by answering Y to this option.
588
589	  Even if you say Y here, the currently visible virtual console
590	  (/dev/tty0) will still be used as the system console by default, but
591	  you can alter that using a kernel command line option such as
592	  "console=ttymxc0". (Try "man bootparam" or see the documentation of
593	  your bootloader about how to pass options to the kernel at boot time.)
594
595config SERIAL_UARTLITE
596	tristate "Xilinx uartlite serial port support"
597	depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
598	select SERIAL_CORE
599	help
600	  Say Y here if you want to use the Xilinx uartlite serial controller.
601
602	  To compile this driver as a module, choose M here: the
603	  module will be called uartlite.
604
605config SERIAL_UARTLITE_CONSOLE
606	bool "Support for console on Xilinx uartlite serial port"
607	depends on SERIAL_UARTLITE=y
608	select SERIAL_CORE_CONSOLE
609	help
610	  Say Y here if you wish to use a Xilinx uartlite as the system
611	  console (the system console is the device which receives all kernel
612	  messages and warnings and which allows logins in single user mode).
613
614config SERIAL_SUNCORE
615	bool
616	depends on SPARC
617	select SERIAL_CORE
618	select SERIAL_CORE_CONSOLE
619	default y
620
621config SERIAL_SUNZILOG
622	tristate "Sun Zilog8530 serial support"
623	depends on SPARC
624	help
625	  This driver supports the Zilog8530 serial ports found on many Sparc
626	  systems.  Say Y or M if you want to be able to these serial ports.
627
628config SERIAL_SUNZILOG_CONSOLE
629	bool "Console on Sun Zilog8530 serial port"
630	depends on SERIAL_SUNZILOG=y
631	help
632	  If you would like to be able to use the Zilog8530 serial port
633	  on your Sparc system as the console, you can do so by answering
634	  Y to this option.
635
636config SERIAL_SUNSU
637	tristate "Sun SU serial support"
638	depends on SPARC && PCI
639	help
640	  This driver supports the 8250 serial ports that run the keyboard and
641	  mouse on (PCI) UltraSPARC systems.  Say Y or M if you want to be able
642	  to these serial ports.
643
644config SERIAL_SUNSU_CONSOLE
645	bool "Console on Sun SU serial port"
646	depends on SERIAL_SUNSU=y
647	help
648	  If you would like to be able to use the SU serial port
649	  on your Sparc system as the console, you can do so by answering
650	  Y to this option.
651
652config SERIAL_MUX
653	tristate "Serial MUX support"
654	depends on GSC
655	select SERIAL_CORE
656	default y
657	---help---
658	  Saying Y here will enable the hardware MUX serial driver for
659	  the Nova, K class systems and D class with a 'remote control card'.
660	  The hardware MUX is not 8250/16550 compatible therefore the
661	  /dev/ttyB0 device is shared between the Serial MUX and the PDC
662	  software console. The following steps need to be completed to use
663	  the Serial MUX:
664
665	    1. create the device entry (mknod /dev/ttyB0 c 11 0)
666	    2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
667	    3. Add device ttyB0 to /etc/securetty (if you want to log on as
668		 root on this console.)
669	    4. Change the kernel command console parameter to: console=ttyB0
670
671config SERIAL_MUX_CONSOLE
672	bool "Support for console on serial MUX"
673	depends on SERIAL_MUX=y
674	select SERIAL_CORE_CONSOLE
675	default y
676
677config PDC_CONSOLE
678	bool "PDC software console support"
679	depends on PARISC && !SERIAL_MUX && VT
680	default n
681	help
682	  Saying Y here will enable the software based PDC console to be 
683	  used as the system console.  This is useful for machines in 
684	  which the hardware based console has not been written yet.  The
685	  following steps must be completed to use the PDC console:
686
687	    1. create the device entry (mknod /dev/ttyB0 c 11 0)
688	    2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
689	    3. Add device ttyB0 to /etc/securetty (if you want to log on as
690		 root on this console.)
691	    4. Change the kernel command console parameter to: console=ttyB0
692
693config SERIAL_SUNSAB
694	tristate "Sun Siemens SAB82532 serial support"
695	depends on SPARC && PCI
696	help
697	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
698	  (PCI) UltraSPARC systems.  Say Y or M if you want to be able to these
699	  serial ports.
700
701config SERIAL_SUNSAB_CONSOLE
702	bool "Console on Sun Siemens SAB82532 serial port"
703	depends on SERIAL_SUNSAB=y
704	help
705	  If you would like to be able to use the SAB82532 serial port
706	  on your Sparc system as the console, you can do so by answering
707	  Y to this option.
708
709config SERIAL_SUNHV
710	bool "Sun4v Hypervisor Console support"
711	depends on SPARC64
712	help
713	  This driver supports the console device found on SUN4V Sparc
714	  systems.  Say Y if you want to be able to use this device.
715
716config SERIAL_IP22_ZILOG
717	tristate "SGI Zilog8530 serial support"
718	depends on SGI_HAS_ZILOG
719	select SERIAL_CORE
720	help
721	  This driver supports the Zilog8530 serial ports found on SGI
722	  systems.  Say Y or M if you want to be able to these serial ports.
723
724config SERIAL_IP22_ZILOG_CONSOLE
725	bool "Console on SGI Zilog8530 serial port"
726	depends on SERIAL_IP22_ZILOG=y
727	select SERIAL_CORE_CONSOLE
728
729config SERIAL_SH_SCI
730	tristate "SuperH SCI(F) serial port support"
731	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
732	select SERIAL_CORE
733
734config SERIAL_SH_SCI_NR_UARTS
735	int "Maximum number of SCI(F) serial ports"
736	depends on SERIAL_SH_SCI
737	default "2"
738
739config SERIAL_SH_SCI_CONSOLE
740	bool "Support for console on SuperH SCI(F)"
741	depends on SERIAL_SH_SCI=y
742	select SERIAL_CORE_CONSOLE
743
744config SERIAL_SH_SCI_DMA
745	bool "DMA support"
746	depends on SERIAL_SH_SCI && SH_DMAE
747
748config SERIAL_PNX8XXX
749	bool "Enable PNX8XXX SoCs' UART Support"
750	depends on SOC_PNX833X
751	select SERIAL_CORE
752	help
753	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
754	  to use serial ports, say Y.  Otherwise, say N.
755
756config SERIAL_PNX8XXX_CONSOLE
757	bool "Enable PNX8XX0 serial console"
758	depends on SERIAL_PNX8XXX
759	select SERIAL_CORE_CONSOLE
760	help
761	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
762	  to use serial console, say Y. Otherwise, say N.
763
764config SERIAL_HS_LPC32XX
765	tristate "LPC32XX high speed serial port support"
766	depends on ARCH_LPC32XX && OF
767	select SERIAL_CORE
768	help
769	  Support for the LPC32XX high speed serial ports (up to 900kbps).
770	  Those are UARTs completely different from the Standard UARTs on the
771	  LPC32XX SoC.
772	  Choose M or Y here to build this driver.
773
774config SERIAL_HS_LPC32XX_CONSOLE
775	bool "Enable LPC32XX high speed UART serial console"
776	depends on SERIAL_HS_LPC32XX=y
777	select SERIAL_CORE_CONSOLE
778	help
779	  If you would like to be able to use one of the high speed serial
780	  ports on the LPC32XX as the console, you can do so by answering
781	  Y to this option.
782
783config SERIAL_CORE
784	tristate
785
786config SERIAL_CORE_CONSOLE
787	bool
788
789config CONSOLE_POLL
790	bool
791
792config SERIAL_68328
793	bool "68328 serial support"
794	depends on M68328 || M68EZ328 || M68VZ328
795	help
796	  This driver supports the built-in serial port of the Motorola 68328
797	  (standard, EZ and VZ varieties).
798
799config SERIAL_68328_RTS_CTS
800	bool "Support RTS/CTS on 68328 serial port"
801	depends on SERIAL_68328
802
803config SERIAL_MCF
804	bool "Coldfire serial support"
805	depends on COLDFIRE
806	select SERIAL_CORE
807	help
808	  This serial driver supports the Freescale Coldfire serial ports.
809
810config SERIAL_MCF_BAUDRATE
811	int "Default baudrate for Coldfire serial ports"
812	depends on SERIAL_MCF
813	default 19200
814	help
815	  This setting lets you define what the default baudrate is for the
816	  ColdFire serial ports. The usual default varies from board to board,
817	  and this setting is a way of catering for that.
818
819config SERIAL_MCF_CONSOLE
820	bool "Coldfire serial console support"
821	depends on SERIAL_MCF
822	select SERIAL_CORE_CONSOLE
823	help
824	  Enable a ColdFire internal serial port to be the system console.
825
826config SERIAL_PMACZILOG
827	tristate "Mac or PowerMac z85c30 ESCC support"
828	depends on (M68K && MAC) || PPC_PMAC
829	select SERIAL_CORE
830	help
831	  This driver supports the Zilog z85C30 serial ports found on
832	  (Power)Mac machines.
833	  Say Y or M if you want to be able to these serial ports.
834
835config SERIAL_PMACZILOG_TTYS
836	bool "Use ttySn device nodes for Zilog z85c30"
837	depends on SERIAL_PMACZILOG
838	help
839	  The pmac_zilog driver for the z85C30 chip on many powermacs
840	  historically used the device numbers for /dev/ttySn.  The
841	  8250 serial port driver also uses these numbers, which means
842	  the two drivers being unable to coexist; you could not use
843	  both z85C30 and 8250 type ports at the same time.
844
845	  If this option is not selected, the pmac_zilog driver will
846	  use the device numbers allocated for /dev/ttyPZn.  This allows
847	  the pmac_zilog and 8250 drivers to co-exist, but may cause
848	  existing userspace setups to break.  Programs that need to
849	  access the built-in serial ports on powermacs will need to
850	  be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
851
852	  If you enable this option, any z85c30 ports in the system will
853	  be registered as ttyS0 onwards as in the past, and you will be
854	  unable to use the 8250 module for PCMCIA or other 16C550-style
855	  UARTs.
856
857	  Say N unless you need the z85c30 ports on your (Power)Mac
858	  to appear as /dev/ttySn.
859
860config SERIAL_PMACZILOG_CONSOLE
861	bool "Console on Mac or PowerMac z85c30 serial port"
862	depends on SERIAL_PMACZILOG=y
863	select SERIAL_CORE_CONSOLE
864	help
865	  If you would like to be able to use the z85c30 serial port
866	  on your (Power)Mac as the console, you can do so by answering
867	  Y to this option.
868
869config SERIAL_CPM
870	tristate "CPM SCC/SMC serial port support"
871	depends on CPM2 || CPM1
872	select SERIAL_CORE
873	help
874	  This driver supports the SCC and SMC serial ports on Motorola 
875	  embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
876
877config SERIAL_CPM_CONSOLE
878	bool "Support for console on CPM SCC/SMC serial port"
879	depends on SERIAL_CPM=y
880	select SERIAL_CORE_CONSOLE
881	help
882	  Say Y here if you wish to use a SCC or SMC CPM UART as the system
883	  console (the system console is the device which receives all kernel
884	  messages and warnings and which allows logins in single user mode).
885
886	  Even if you say Y here, the currently visible framebuffer console
887	  (/dev/tty0) will still be used as the system console by default, but
888	  you can alter that using a kernel command line option such as
889	  "console=ttyCPM0". (Try "man bootparam" or see the documentation of
890	  your boot loader (lilo or loadlin) about how to pass options to the
891	  kernel at boot time.)
892
893config SERIAL_SGI_L1_CONSOLE
894	bool "SGI Altix L1 serial console support"
895	depends on IA64_GENERIC || IA64_SGI_SN2
896	select SERIAL_CORE
897	select SERIAL_CORE_CONSOLE
898	help
899		If you have an SGI Altix and you would like to use the system
900		controller serial port as your console (you want this!),
901		say Y.  Otherwise, say N.
902
903config SERIAL_MPC52xx
904	tristate "Freescale MPC52xx/MPC512x family PSC serial support"
905	depends on PPC_MPC52xx || PPC_MPC512x
906	select SERIAL_CORE
907	help
908	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
909	  like to use them, you must answer Y or M to this option. Note that
910	  for use as console, it must be included in kernel and not as a
911	  module.
912
913config SERIAL_MPC52xx_CONSOLE
914	bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
915	depends on SERIAL_MPC52xx=y
916	select SERIAL_CORE_CONSOLE
917	help
918	  Select this options if you'd like to use one of the PSC serial port
919	  of the Freescale MPC52xx family as a console.
920
921config SERIAL_MPC52xx_CONSOLE_BAUD
922	int "Freescale MPC52xx/MPC512x family PSC serial port baud"
923	depends on SERIAL_MPC52xx_CONSOLE=y
924	default "9600"
925	help
926	  Select the MPC52xx console baud rate.
927	  This value is only used if the bootloader doesn't pass in the
928	  console baudrate
929
930config SERIAL_ICOM
931	tristate "IBM Multiport Serial Adapter"
932	depends on PCI && PPC_PSERIES
933	select SERIAL_CORE
934	select FW_LOADER
935	help
936	  This driver is for a family of multiport serial adapters
937	  including 2 port RVX, 2 port internal modem, 4 port internal
938	  modem and a split 1 port RVX and 1 port internal modem.
939
940	  This driver can also be built as a module.  If so, the module
941	  will be called icom.
942
943config SERIAL_M32R_SIO
944	bool "M32R SIO I/F"
945	depends on M32R
946	default y
947	select SERIAL_CORE
948	help
949	  Say Y here if you want to use the M32R serial controller.
950
951config SERIAL_M32R_SIO_CONSOLE
952	bool "use SIO console"
953	depends on SERIAL_M32R_SIO=y
954	select SERIAL_CORE_CONSOLE
955	help
956	  Say Y here if you want to support a serial console.
957
958	  If you use an M3T-M32700UT or an OPSPUT platform,
959	  please say also y for SERIAL_M32R_PLDSIO.
960
961config SERIAL_M32R_PLDSIO
962	bool "M32R SIO I/F on a PLD"
963	depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
964	default n
965	help
966	  Say Y here if you want to use the M32R serial controller
967	  on a PLD (Programmable Logic Device).
968
969	  If you use an M3T-M32700UT or an OPSPUT platform,
970	  please say Y.
971
972config SERIAL_TXX9
973	bool "TMPTX39XX/49XX SIO support"
974	depends on HAS_TXX9_SERIAL
975	select SERIAL_CORE
976	default y
977
978config HAS_TXX9_SERIAL
979	bool
980
981config SERIAL_TXX9_NR_UARTS
982	int "Maximum number of TMPTX39XX/49XX SIO ports"
983	depends on SERIAL_TXX9
984	default "6"
985
986config SERIAL_TXX9_CONSOLE
987	bool "TMPTX39XX/49XX SIO Console support"
988	depends on SERIAL_TXX9=y
989	select SERIAL_CORE_CONSOLE
990
991config SERIAL_TXX9_STDSERIAL
992	bool "TX39XX/49XX SIO act as standard serial"
993	depends on !SERIAL_8250 && SERIAL_TXX9
994
995config SERIAL_VR41XX
996	tristate "NEC VR4100 series Serial Interface Unit support"
997	depends on CPU_VR41XX
998	select SERIAL_CORE
999	help
1000	  If you have a NEC VR4100 series processor and you want to use
1001	  Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
1002	  (not include VR4111/VR4121 DSIU), say Y.  Otherwise, say N.
1003
1004config SERIAL_VR41XX_CONSOLE
1005	bool "Enable NEC VR4100 series Serial Interface Unit console"
1006	depends on SERIAL_VR41XX=y
1007	select SERIAL_CORE_CONSOLE
1008	help
1009	  If you have a NEC VR4100 series processor and you want to use
1010	  a console on a serial port, say Y.  Otherwise, say N.
1011
1012config SERIAL_JSM
1013	tristate "Digi International NEO and Classic PCI Support"
1014	depends on PCI
1015	select SERIAL_CORE
1016	help
1017	  This is a driver for Digi International's Neo and Classic series
1018	  of cards which provide multiple serial ports. You would need
1019	  something like this to connect more than two modems to your Linux
1020	  box, for instance in order to become a dial-in server. This driver
1021	  supports PCI boards only.
1022
1023	  If you have a card like this, say Y here, otherwise say N.
1024
1025	  To compile this driver as a module, choose M here: the
1026	  module will be called jsm.
1027
1028config SERIAL_SGI_IOC4
1029	tristate "SGI IOC4 controller serial support"
1030	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1031	select SERIAL_CORE
1032	help
1033		If you have an SGI Altix with an IOC4 based Base IO card
1034		and wish to use the serial ports on this card, say Y.
1035		Otherwise, say N.
1036
1037config SERIAL_SGI_IOC3
1038	tristate "SGI Altix IOC3 serial support"
1039	depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1040	select SERIAL_CORE
1041	help
1042	  If you have an SGI Altix with an IOC3 serial card,
1043	  say Y or M.  Otherwise, say N.
1044
1045config SERIAL_MSM
1046	bool "MSM on-chip serial port support"
1047	depends on ARCH_QCOM
1048	select SERIAL_CORE
1049
1050config SERIAL_MSM_CONSOLE
1051	bool "MSM serial console support"
1052	depends on SERIAL_MSM=y
1053	select SERIAL_CORE_CONSOLE
1054	select SERIAL_EARLYCON
1055
1056config SERIAL_VT8500
1057	bool "VIA VT8500 on-chip serial port support"
1058	depends on ARCH_VT8500
1059	select SERIAL_CORE
1060
1061config SERIAL_VT8500_CONSOLE
1062	bool "VIA VT8500 serial console support"
1063	depends on SERIAL_VT8500=y
1064	select SERIAL_CORE_CONSOLE
1065
1066config SERIAL_ETRAXFS
1067	bool "ETRAX FS serial port support"
1068	depends on ETRAX_ARCH_V32 && OF
1069	select SERIAL_CORE
1070
1071config SERIAL_ETRAXFS_CONSOLE
1072	bool "ETRAX FS serial console support"
1073	depends on SERIAL_ETRAXFS
1074	select SERIAL_CORE_CONSOLE
1075
1076config SERIAL_NETX
1077	tristate "NetX serial port support"
1078	depends on ARCH_NETX
1079	select SERIAL_CORE
1080	help
1081	  If you have a machine based on a Hilscher NetX SoC you
1082	  can enable its onboard serial port by enabling this option.
1083
1084          To compile this driver as a module, choose M here: the
1085          module will be called netx-serial.
1086
1087config SERIAL_NETX_CONSOLE
1088	bool "Console on NetX serial port"
1089	depends on SERIAL_NETX=y
1090	select SERIAL_CORE_CONSOLE
1091	help
1092	  If you have enabled the serial port on the Hilscher NetX SoC
1093	  you can make it the console by answering Y to this option.
1094
1095config SERIAL_OF_PLATFORM
1096	tristate "Serial port on Open Firmware platform bus"
1097	depends on OF
1098	depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
1099	help
1100	  If you have a PowerPC based system that has serial ports
1101	  on a platform specific bus, you should enable this option.
1102	  Currently, only 8250 compatible ports are supported, but
1103	  others can easily be added.
1104
1105config SERIAL_OMAP
1106	tristate "OMAP serial port support"
1107	depends on ARCH_OMAP2PLUS
1108	select SERIAL_CORE
1109	help
1110	  If you have a machine based on an Texas Instruments OMAP CPU you
1111	  can enable its onboard serial ports by enabling this option.
1112
1113	  By enabling this option you take advantage of dma feature available
1114	  with the omap-serial driver. DMA support can be enabled from platform
1115	  data.
1116
1117config SERIAL_OMAP_CONSOLE
1118	bool "Console on OMAP serial port"
1119	depends on SERIAL_OMAP=y
1120	select SERIAL_CORE_CONSOLE
1121	help
1122	  Select this option if you would like to use omap serial port as
1123	  console.
1124
1125	  Even if you say Y here, the currently visible virtual console
1126	  (/dev/tty0) will still be used as the system console by default, but
1127	  you can alter that using a kernel command line option such as
1128	  "console=ttyOx". (Try "man bootparam" or see the documentation of
1129	  your boot loader about how to pass options to the kernel at
1130	  boot time.)
1131
1132config SERIAL_OF_PLATFORM_NWPSERIAL
1133	tristate "NWP serial port driver"
1134	depends on PPC_DCR
1135	select SERIAL_OF_PLATFORM
1136	select SERIAL_CORE_CONSOLE
1137	select SERIAL_CORE
1138	help
1139	  This driver supports the cell network processor nwp serial
1140	  device.
1141
1142config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
1143	bool "Console on NWP serial port"
1144	depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1145	select SERIAL_CORE_CONSOLE
1146	help
1147	  Support for Console on the NWP serial ports.
1148
1149config SERIAL_LANTIQ
1150	bool "Lantiq serial driver"
1151	depends on LANTIQ
1152	select SERIAL_CORE
1153	select SERIAL_CORE_CONSOLE
1154	help
1155	  Support for console and UART on Lantiq SoCs.
1156
1157config SERIAL_QE
1158	tristate "Freescale QUICC Engine serial port support"
1159	depends on QUICC_ENGINE
1160	select SERIAL_CORE
1161	select FW_LOADER
1162	default n
1163	help
1164	  This driver supports the QE serial ports on Freescale embedded
1165	  PowerPC that contain a QUICC Engine.
1166
1167config SERIAL_SCCNXP
1168	tristate "SCCNXP serial port support"
1169	select SERIAL_CORE
1170	help
1171	  This selects support for an advanced UART from NXP (Philips).
1172	  Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
1173	  SC28L202, SCC68681 and SCC68692.
1174
1175config SERIAL_SCCNXP_CONSOLE
1176	bool "Console on SCCNXP serial port"
1177	depends on SERIAL_SCCNXP=y
1178	select SERIAL_CORE_CONSOLE
1179	help
1180	  Support for console on SCCNXP serial ports.
1181
1182config SERIAL_SC16IS7XX
1183	tristate "SC16IS7xx serial support"
1184	depends on I2C
1185	select SERIAL_CORE
1186	select REGMAP_I2C if I2C
1187	help
1188	  This selects support for SC16IS7xx serial ports.
1189	  Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
1190	  SC16IS760 and SC16IS762.
1191
1192config SERIAL_BFIN_SPORT
1193	tristate "Blackfin SPORT emulate UART"
1194	depends on BLACKFIN
1195	select SERIAL_CORE
1196	help
1197	  Enable SPORT emulate UART on Blackfin series.
1198
1199	  To compile this driver as a module, choose M here: the
1200	  module will be called bfin_sport_uart.
1201
1202config SERIAL_BFIN_SPORT_CONSOLE
1203	bool "Console on Blackfin sport emulated uart"
1204	depends on SERIAL_BFIN_SPORT=y
1205	select SERIAL_CORE_CONSOLE
1206
1207config SERIAL_BFIN_SPORT0_UART
1208	bool "Enable UART over SPORT0"
1209	depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
1210	help
1211	  Enable UART over SPORT0
1212
1213config SERIAL_BFIN_SPORT0_UART_CTSRTS
1214	bool "Enable UART over SPORT0 hardware flow control"
1215	depends on SERIAL_BFIN_SPORT0_UART
1216	help
1217	  Enable hardware flow control in the driver.
1218
1219config SERIAL_BFIN_SPORT1_UART
1220	bool "Enable UART over SPORT1"
1221	depends on SERIAL_BFIN_SPORT
1222	help
1223	  Enable UART over SPORT1
1224
1225config SERIAL_BFIN_SPORT1_UART_CTSRTS
1226	bool "Enable UART over SPORT1 hardware flow control"
1227	depends on SERIAL_BFIN_SPORT1_UART
1228	help
1229	  Enable hardware flow control in the driver.
1230
1231config SERIAL_BFIN_SPORT2_UART
1232	bool "Enable UART over SPORT2"
1233	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1234	help
1235	  Enable UART over SPORT2
1236
1237config SERIAL_BFIN_SPORT2_UART_CTSRTS
1238	bool "Enable UART over SPORT2 hardware flow control"
1239	depends on SERIAL_BFIN_SPORT2_UART
1240	help
1241	  Enable hardware flow control in the driver.
1242
1243config SERIAL_BFIN_SPORT3_UART
1244	bool "Enable UART over SPORT3"
1245	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1246	help
1247	  Enable UART over SPORT3
1248
1249config SERIAL_BFIN_SPORT3_UART_CTSRTS
1250	bool "Enable UART over SPORT3 hardware flow control"
1251	depends on SERIAL_BFIN_SPORT3_UART
1252	help
1253	  Enable hardware flow control in the driver.
1254
1255config SERIAL_TIMBERDALE
1256	tristate "Support for timberdale UART"
1257	select SERIAL_CORE
1258	depends on X86_32 || COMPILE_TEST
1259	---help---
1260	Add support for UART controller on timberdale.
1261
1262config SERIAL_BCM63XX
1263	tristate "Broadcom BCM63xx/BCM33xx UART support"
1264	select SERIAL_CORE
1265	depends on MIPS || ARM || COMPILE_TEST
1266	help
1267	  This enables the driver for the onchip UART core found on
1268	  the following chipsets:
1269
1270	    BCM33xx (cable modem)
1271	    BCM63xx/BCM63xxx (DSL)
1272	    BCM68xx (PON)
1273	    BCM7xxx (STB) - DOCSIS console
1274
1275config SERIAL_BCM63XX_CONSOLE
1276	bool "Console on BCM63xx serial port"
1277	depends on SERIAL_BCM63XX=y
1278	select SERIAL_CORE_CONSOLE
1279	select SERIAL_EARLYCON
1280	help
1281	  If you have enabled the serial port on the BCM63xx CPU
1282	  you can make it the console by answering Y to this option.
1283
1284config SERIAL_GRLIB_GAISLER_APBUART
1285	tristate "GRLIB APBUART serial support"
1286	depends on OF && SPARC
1287	select SERIAL_CORE
1288	---help---
1289	Add support for the GRLIB APBUART serial port.
1290
1291config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
1292	bool "Console on GRLIB APBUART serial port"
1293	depends on SERIAL_GRLIB_GAISLER_APBUART=y
1294	select SERIAL_CORE_CONSOLE
1295	help
1296	Support for running a console on the GRLIB APBUART
1297
1298config SERIAL_ALTERA_JTAGUART
1299	tristate "Altera JTAG UART support"
1300	select SERIAL_CORE
1301	help
1302	  This driver supports the Altera JTAG UART port.
1303
1304config SERIAL_ALTERA_JTAGUART_CONSOLE
1305	bool "Altera JTAG UART console support"
1306	depends on SERIAL_ALTERA_JTAGUART=y
1307	select SERIAL_CORE_CONSOLE
1308	help
1309	  Enable a Altera JTAG UART port to be the system console.
1310
1311config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
1312	bool "Bypass output when no connection"
1313	depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1314	select SERIAL_CORE_CONSOLE
1315	help
1316	  Bypass console output and keep going even if there is no
1317	  JTAG terminal connection with the host.
1318
1319config SERIAL_ALTERA_UART
1320	tristate "Altera UART support"
1321	select SERIAL_CORE
1322	help
1323	  This driver supports the Altera softcore UART port.
1324
1325config SERIAL_ALTERA_UART_MAXPORTS
1326	int "Maximum number of Altera UART ports"
1327	depends on SERIAL_ALTERA_UART
1328	default 4
1329	help
1330	  This setting lets you define the maximum number of the Altera
1331	  UART ports. The usual default varies from board to board, and
1332	  this setting is a way of catering for that.
1333
1334config SERIAL_ALTERA_UART_BAUDRATE
1335	int "Default baudrate for Altera UART ports"
1336	depends on SERIAL_ALTERA_UART
1337	default 115200
1338	help
1339	  This setting lets you define what the default baudrate is for the
1340	  Altera UART ports. The usual default varies from board to board,
1341	  and this setting is a way of catering for that.
1342
1343config SERIAL_ALTERA_UART_CONSOLE
1344	bool "Altera UART console support"
1345	depends on SERIAL_ALTERA_UART=y
1346	select SERIAL_CORE_CONSOLE
1347	help
1348	  Enable a Altera UART port to be the system console.
1349
1350config SERIAL_IFX6X60
1351        tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
1352	depends on GPIOLIB && SPI
1353	help
1354	  Support for the IFX6x60 modem devices on Intel MID platforms.
1355
1356config SERIAL_PCH_UART
1357	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1358	depends on PCI && (X86_32 || COMPILE_TEST)
1359	select SERIAL_CORE
1360	help
1361	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1362	  which is an IOH(Input/Output Hub) for x86 embedded processor.
1363	  Enabling PCH_DMA, this PCH UART works as DMA mode.
1364
1365	  This driver also can be used for LAPIS Semiconductor IOH(Input/
1366	  Output Hub), ML7213, ML7223 and ML7831.
1367	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1368	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
1369	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1370	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
1371
1372config SERIAL_PCH_UART_CONSOLE
1373	bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1374	depends on SERIAL_PCH_UART=y
1375	select SERIAL_CORE_CONSOLE
1376	help
1377	  Say Y here if you wish to use the PCH UART as the system console
1378	  (the system  console is the device which receives all kernel messages and
1379	  warnings and which allows logins in single user mode).
1380
1381config SERIAL_MSM_SMD
1382	bool "Enable tty device interface for some SMD ports"
1383	default n
1384	depends on MSM_SMD
1385	help
1386	  Enables userspace clients to read and write to some streaming SMD
1387	  ports via tty device interface for MSM chipset.
1388
1389config SERIAL_MXS_AUART
1390	depends on ARCH_MXS
1391	tristate "MXS AUART support"
1392	select SERIAL_CORE
1393	select SERIAL_MCTRL_GPIO if GPIOLIB
1394	help
1395	  This driver supports the MXS Application UART (AUART) port.
1396
1397config SERIAL_MXS_AUART_CONSOLE
1398	bool "MXS AUART console support"
1399	depends on SERIAL_MXS_AUART=y
1400	select SERIAL_CORE_CONSOLE
1401	help
1402	  Enable a MXS AUART port to be the system console.
1403
1404config SERIAL_XILINX_PS_UART
1405	tristate "Cadence (Xilinx Zynq) UART support"
1406	depends on OF
1407	select SERIAL_CORE
1408	help
1409	  This driver supports the Cadence UART. It is found e.g. in Xilinx
1410	  Zynq.
1411
1412config SERIAL_XILINX_PS_UART_CONSOLE
1413	bool "Cadence UART console support"
1414	depends on SERIAL_XILINX_PS_UART=y
1415	select SERIAL_CORE_CONSOLE
1416	select SERIAL_EARLYCON
1417	help
1418	  Enable a Cadence UART port to be the system console.
1419
1420config SERIAL_AR933X
1421	tristate "AR933X serial port support"
1422	depends on HAVE_CLK && SOC_AR933X
1423	select SERIAL_CORE
1424	help
1425	  If you have an Atheros AR933X SOC based board and want to use the
1426	  built-in UART of the SoC, say Y to this option.
1427
1428	  To compile this driver as a module, choose M here: the
1429	  module will be called ar933x_uart.
1430
1431config SERIAL_AR933X_CONSOLE
1432	bool "Console on AR933X serial port"
1433	depends on SERIAL_AR933X=y
1434	select SERIAL_CORE_CONSOLE
1435	help
1436	  Enable a built-in UART port of the AR933X to be the system console.
1437
1438config SERIAL_AR933X_NR_UARTS
1439	int "Maximum number of AR933X serial ports"
1440	depends on SERIAL_AR933X
1441	default "2"
1442	help
1443	  Set this to the number of serial ports you want the driver
1444	  to support.
1445
1446config SERIAL_EFM32_UART
1447	tristate "EFM32 UART/USART port"
1448	depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1449	select SERIAL_CORE
1450	help
1451	  This driver support the USART and UART ports on
1452	  Energy Micro's efm32 SoCs.
1453
1454config SERIAL_EFM32_UART_CONSOLE
1455	bool "EFM32 UART/USART console support"
1456	depends on SERIAL_EFM32_UART=y
1457	select SERIAL_CORE_CONSOLE
1458
1459config SERIAL_TILEGX
1460	tristate "TILE-Gx on-chip serial port support"
1461	depends on TILEGX
1462	select TILE_GXIO_UART
1463	select SERIAL_CORE
1464	---help---
1465	  This device provides access to the on-chip UARTs on the TILE-Gx
1466	  processor.
1467
1468config SERIAL_ARC
1469	tristate "ARC UART driver support"
1470	select SERIAL_CORE
1471	help
1472	  Driver for on-chip UART for ARC(Synopsys) for the legacy
1473	  FPGA Boards (ML50x/ARCAngel4)
1474
1475config SERIAL_ARC_CONSOLE
1476	bool "Console on ARC UART"
1477	depends on SERIAL_ARC=y
1478	select SERIAL_CORE_CONSOLE
1479	select SERIAL_EARLYCON
1480	help
1481	  Enable system Console on ARC UART
1482
1483config SERIAL_ARC_NR_PORTS
1484	int "Number of ARC UART ports"
1485	depends on SERIAL_ARC
1486	range 1 3
1487	default "1"
1488	help
1489	  Set this to the number of serial ports you want the driver
1490	  to support.
1491
1492config SERIAL_RP2
1493	tristate "Comtrol RocketPort EXPRESS/INFINITY support"
1494	depends on PCI
1495	select SERIAL_CORE
1496	help
1497	  This driver supports the Comtrol RocketPort EXPRESS and
1498	  RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1499	  These adapters use a "RocketPort 2" ASIC that is not compatible
1500	  with the original RocketPort driver (CONFIG_ROCKETPORT).
1501
1502	  To compile this driver as a module, choose M here: the
1503	  module will be called rp2.
1504
1505	  If you want to compile this driver into the kernel, say Y here.  If
1506	  you don't have a suitable RocketPort card installed, say N.
1507
1508config SERIAL_RP2_NR_UARTS
1509	int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1510	depends on SERIAL_RP2
1511	default "32"
1512	help
1513	  If multiple cards are present, the default limit of 32 ports may
1514	  need to be increased.
1515
1516config SERIAL_FSL_LPUART
1517	tristate "Freescale lpuart serial port support"
1518	depends on HAS_DMA
1519	select SERIAL_CORE
1520	help
1521	  Support for the on-chip lpuart on some Freescale SOCs.
1522
1523config SERIAL_FSL_LPUART_CONSOLE
1524	bool "Console on Freescale lpuart serial port"
1525	depends on SERIAL_FSL_LPUART=y
1526	select SERIAL_CORE_CONSOLE
1527	help
1528	  If you have enabled the lpuart serial port on the Freescale SoCs,
1529	  you can make it the console by answering Y to this option.
1530
1531config SERIAL_CONEXANT_DIGICOLOR
1532	tristate "Conexant Digicolor CX92xxx USART serial port support"
1533	depends on OF
1534	select SERIAL_CORE
1535	help
1536	  Support for the on-chip USART on Conexant Digicolor SoCs.
1537
1538config SERIAL_CONEXANT_DIGICOLOR_CONSOLE
1539	bool "Console on Conexant Digicolor serial port"
1540	depends on SERIAL_CONEXANT_DIGICOLOR=y
1541	select SERIAL_CORE_CONSOLE
1542	help
1543	  If you have enabled the USART serial port on Conexant Digicolor
1544	  SoCs, you can make it the console by answering Y to this option.
1545
1546config SERIAL_ST_ASC
1547	tristate "ST ASC serial port support"
1548	select SERIAL_CORE
1549	depends on ARM || COMPILE_TEST
1550	help
1551	  This driver is for the on-chip Asychronous Serial Controller on
1552	  STMicroelectronics STi SoCs.
1553	  ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
1554	  It support all industry standard baud rates.
1555
1556	  If unsure, say N.
1557
1558config SERIAL_ST_ASC_CONSOLE
1559	bool "Support for console on ST ASC"
1560	depends on SERIAL_ST_ASC=y
1561	select SERIAL_CORE_CONSOLE
1562
1563config SERIAL_MEN_Z135
1564	tristate "MEN 16z135 Support"
1565	select SERIAL_CORE
1566	depends on MCB
1567	help
1568	  Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1569	  on a MCB carrier.
1570
1571	  This driver can also be build as a module. If so, the module will be called
1572	  men_z135_uart.ko
1573
1574config SERIAL_SPRD
1575	tristate "Support for Spreadtrum serial"
1576	depends on ARCH_SPRD
1577	select SERIAL_CORE
1578	help
1579	  This enables the driver for the Spreadtrum's serial.
1580
1581config SERIAL_SPRD_CONSOLE
1582	bool "Spreadtrum UART console support"
1583	depends on SERIAL_SPRD=y
1584	select SERIAL_CORE_CONSOLE
1585	select SERIAL_EARLYCON
1586	help
1587	  Support for early debug console using Spreadtrum's serial. This enables
1588	  the console before standard serial driver is probed. This is enabled
1589	  with "earlycon" on the kernel command line. The console is
1590	  enabled when early_param is processed.
1591
1592endmenu
1593
1594config SERIAL_MCTRL_GPIO
1595	tristate
1596
1597endif # TTY
1598