1/* 2 * Copyright (c) 2005-2010 Brocade Communications Systems, Inc. 3 * All rights reserved 4 * www.brocade.com 5 * 6 * Linux driver for Brocade Fibre Channel Host Bus Adapter. 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License (GPL) Version 2 as 10 * published by the Free Software Foundation 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 */ 17 18#include "bfad_drv.h" 19#include "bfa_ioc.h" 20#include "bfi_reg.h" 21#include "bfa_defs.h" 22 23BFA_TRC_FILE(CNA, IOC_CB); 24 25#define bfa_ioc_cb_join_pos(__ioc) ((u32) (1 << BFA_IOC_CB_JOIN_SH)) 26 27/* 28 * forward declarations 29 */ 30static bfa_boolean_t bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc); 31static void bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc); 32static void bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc); 33static void bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc); 34static void bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix); 35static void bfa_ioc_cb_notify_fail(struct bfa_ioc_s *ioc); 36static void bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc); 37static bfa_boolean_t bfa_ioc_cb_sync_start(struct bfa_ioc_s *ioc); 38static void bfa_ioc_cb_sync_join(struct bfa_ioc_s *ioc); 39static void bfa_ioc_cb_sync_leave(struct bfa_ioc_s *ioc); 40static void bfa_ioc_cb_sync_ack(struct bfa_ioc_s *ioc); 41static bfa_boolean_t bfa_ioc_cb_sync_complete(struct bfa_ioc_s *ioc); 42static void bfa_ioc_cb_set_cur_ioc_fwstate( 43 struct bfa_ioc_s *ioc, enum bfi_ioc_state fwstate); 44static enum bfi_ioc_state bfa_ioc_cb_get_cur_ioc_fwstate(struct bfa_ioc_s *ioc); 45static void bfa_ioc_cb_set_alt_ioc_fwstate( 46 struct bfa_ioc_s *ioc, enum bfi_ioc_state fwstate); 47static enum bfi_ioc_state bfa_ioc_cb_get_alt_ioc_fwstate(struct bfa_ioc_s *ioc); 48 49static struct bfa_ioc_hwif_s hwif_cb; 50 51/* 52 * Called from bfa_ioc_attach() to map asic specific calls. 53 */ 54void 55bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc) 56{ 57 hwif_cb.ioc_pll_init = bfa_ioc_cb_pll_init; 58 hwif_cb.ioc_firmware_lock = bfa_ioc_cb_firmware_lock; 59 hwif_cb.ioc_firmware_unlock = bfa_ioc_cb_firmware_unlock; 60 hwif_cb.ioc_reg_init = bfa_ioc_cb_reg_init; 61 hwif_cb.ioc_map_port = bfa_ioc_cb_map_port; 62 hwif_cb.ioc_isr_mode_set = bfa_ioc_cb_isr_mode_set; 63 hwif_cb.ioc_notify_fail = bfa_ioc_cb_notify_fail; 64 hwif_cb.ioc_ownership_reset = bfa_ioc_cb_ownership_reset; 65 hwif_cb.ioc_sync_start = bfa_ioc_cb_sync_start; 66 hwif_cb.ioc_sync_join = bfa_ioc_cb_sync_join; 67 hwif_cb.ioc_sync_leave = bfa_ioc_cb_sync_leave; 68 hwif_cb.ioc_sync_ack = bfa_ioc_cb_sync_ack; 69 hwif_cb.ioc_sync_complete = bfa_ioc_cb_sync_complete; 70 hwif_cb.ioc_set_fwstate = bfa_ioc_cb_set_cur_ioc_fwstate; 71 hwif_cb.ioc_get_fwstate = bfa_ioc_cb_get_cur_ioc_fwstate; 72 hwif_cb.ioc_set_alt_fwstate = bfa_ioc_cb_set_alt_ioc_fwstate; 73 hwif_cb.ioc_get_alt_fwstate = bfa_ioc_cb_get_alt_ioc_fwstate; 74 75 ioc->ioc_hwif = &hwif_cb; 76} 77 78/* 79 * Return true if firmware of current driver matches the running firmware. 80 */ 81static bfa_boolean_t 82bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc) 83{ 84 enum bfi_ioc_state alt_fwstate, cur_fwstate; 85 struct bfi_ioc_image_hdr_s fwhdr; 86 87 cur_fwstate = bfa_ioc_cb_get_cur_ioc_fwstate(ioc); 88 bfa_trc(ioc, cur_fwstate); 89 alt_fwstate = bfa_ioc_cb_get_alt_ioc_fwstate(ioc); 90 bfa_trc(ioc, alt_fwstate); 91 92 /* 93 * Uninit implies this is the only driver as of now. 94 */ 95 if (cur_fwstate == BFI_IOC_UNINIT) 96 return BFA_TRUE; 97 /* 98 * Check if another driver with a different firmware is active 99 */ 100 bfa_ioc_fwver_get(ioc, &fwhdr); 101 if (!bfa_ioc_fwver_cmp(ioc, &fwhdr) && 102 alt_fwstate != BFI_IOC_DISABLED) { 103 bfa_trc(ioc, alt_fwstate); 104 return BFA_FALSE; 105 } 106 107 return BFA_TRUE; 108} 109 110static void 111bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc) 112{ 113} 114 115/* 116 * Notify other functions on HB failure. 117 */ 118static void 119bfa_ioc_cb_notify_fail(struct bfa_ioc_s *ioc) 120{ 121 writel(~0U, ioc->ioc_regs.err_set); 122 readl(ioc->ioc_regs.err_set); 123} 124 125/* 126 * Host to LPU mailbox message addresses 127 */ 128static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = { 129 { HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0 }, 130 { HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1 } 131}; 132 133/* 134 * Host <-> LPU mailbox command/status registers 135 */ 136static struct { u32 hfn, lpu; } iocreg_mbcmd[] = { 137 138 { HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT }, 139 { HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT } 140}; 141 142static void 143bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc) 144{ 145 void __iomem *rb; 146 int pcifn = bfa_ioc_pcifn(ioc); 147 148 rb = bfa_ioc_bar0(ioc); 149 150 ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox; 151 ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox; 152 ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn; 153 154 if (ioc->port_id == 0) { 155 ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG; 156 ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG; 157 ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG; 158 } else { 159 ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG); 160 ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG); 161 ioc->ioc_regs.alt_ioc_fwstate = (rb + BFA_IOC0_STATE_REG); 162 } 163 164 /* 165 * Host <-> LPU mailbox command/status registers 166 */ 167 ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd[pcifn].hfn; 168 ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd[pcifn].lpu; 169 170 /* 171 * PSS control registers 172 */ 173 ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG); 174 ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG); 175 ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_LCLK_CTL_REG); 176 ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_SCLK_CTL_REG); 177 178 /* 179 * IOC semaphore registers and serialization 180 */ 181 ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG); 182 ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG); 183 184 /* 185 * sram memory access 186 */ 187 ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START); 188 ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CB; 189 190 /* 191 * err set reg : for notification of hb failure 192 */ 193 ioc->ioc_regs.err_set = (rb + ERR_SET_REG); 194} 195 196/* 197 * Initialize IOC to port mapping. 198 */ 199 200static void 201bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc) 202{ 203 /* 204 * For crossbow, port id is same as pci function. 205 */ 206 ioc->port_id = bfa_ioc_pcifn(ioc); 207 208 bfa_trc(ioc, ioc->port_id); 209} 210 211/* 212 * Set interrupt mode for a function: INTX or MSIX 213 */ 214static void 215bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix) 216{ 217} 218 219/* 220 * Synchronized IOC failure processing routines 221 */ 222static bfa_boolean_t 223bfa_ioc_cb_sync_start(struct bfa_ioc_s *ioc) 224{ 225 u32 ioc_fwstate = readl(ioc->ioc_regs.ioc_fwstate); 226 227 /** 228 * Driver load time. If the join bit is set, 229 * it is due to an unclean exit by the driver for this 230 * PCI fn in the previous incarnation. Whoever comes here first 231 * should clean it up, no matter which PCI fn. 232 */ 233 if (ioc_fwstate & BFA_IOC_CB_JOIN_MASK) { 234 writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate); 235 writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate); 236 return BFA_TRUE; 237 } 238 239 return bfa_ioc_cb_sync_complete(ioc); 240} 241 242/* 243 * Cleanup hw semaphore and usecnt registers 244 */ 245static void 246bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc) 247{ 248 249 /* 250 * Read the hw sem reg to make sure that it is locked 251 * before we clear it. If it is not locked, writing 1 252 * will lock it instead of clearing it. 253 */ 254 readl(ioc->ioc_regs.ioc_sem_reg); 255 writel(1, ioc->ioc_regs.ioc_sem_reg); 256} 257 258/* 259 * Synchronized IOC failure processing routines 260 */ 261static void 262bfa_ioc_cb_sync_join(struct bfa_ioc_s *ioc) 263{ 264 u32 r32 = readl(ioc->ioc_regs.ioc_fwstate); 265 u32 join_pos = bfa_ioc_cb_join_pos(ioc); 266 267 writel((r32 | join_pos), ioc->ioc_regs.ioc_fwstate); 268} 269 270static void 271bfa_ioc_cb_sync_leave(struct bfa_ioc_s *ioc) 272{ 273 u32 r32 = readl(ioc->ioc_regs.ioc_fwstate); 274 u32 join_pos = bfa_ioc_cb_join_pos(ioc); 275 276 writel((r32 & ~join_pos), ioc->ioc_regs.ioc_fwstate); 277} 278 279static void 280bfa_ioc_cb_set_cur_ioc_fwstate(struct bfa_ioc_s *ioc, 281 enum bfi_ioc_state fwstate) 282{ 283 u32 r32 = readl(ioc->ioc_regs.ioc_fwstate); 284 285 writel((fwstate | (r32 & BFA_IOC_CB_JOIN_MASK)), 286 ioc->ioc_regs.ioc_fwstate); 287} 288 289static enum bfi_ioc_state 290bfa_ioc_cb_get_cur_ioc_fwstate(struct bfa_ioc_s *ioc) 291{ 292 return (enum bfi_ioc_state)(readl(ioc->ioc_regs.ioc_fwstate) & 293 BFA_IOC_CB_FWSTATE_MASK); 294} 295 296static void 297bfa_ioc_cb_set_alt_ioc_fwstate(struct bfa_ioc_s *ioc, 298 enum bfi_ioc_state fwstate) 299{ 300 u32 r32 = readl(ioc->ioc_regs.alt_ioc_fwstate); 301 302 writel((fwstate | (r32 & BFA_IOC_CB_JOIN_MASK)), 303 ioc->ioc_regs.alt_ioc_fwstate); 304} 305 306static enum bfi_ioc_state 307bfa_ioc_cb_get_alt_ioc_fwstate(struct bfa_ioc_s *ioc) 308{ 309 return (enum bfi_ioc_state)(readl(ioc->ioc_regs.alt_ioc_fwstate) & 310 BFA_IOC_CB_FWSTATE_MASK); 311} 312 313static void 314bfa_ioc_cb_sync_ack(struct bfa_ioc_s *ioc) 315{ 316 bfa_ioc_cb_set_cur_ioc_fwstate(ioc, BFI_IOC_FAIL); 317} 318 319static bfa_boolean_t 320bfa_ioc_cb_sync_complete(struct bfa_ioc_s *ioc) 321{ 322 u32 fwstate, alt_fwstate; 323 fwstate = bfa_ioc_cb_get_cur_ioc_fwstate(ioc); 324 325 /* 326 * At this point, this IOC is hoding the hw sem in the 327 * start path (fwcheck) OR in the disable/enable path 328 * OR to check if the other IOC has acknowledged failure. 329 * 330 * So, this IOC can be in UNINIT, INITING, DISABLED, FAIL 331 * or in MEMTEST states. In a normal scenario, this IOC 332 * can not be in OP state when this function is called. 333 * 334 * However, this IOC could still be in OP state when 335 * the OS driver is starting up, if the OptROM code has 336 * left it in that state. 337 * 338 * If we had marked this IOC's fwstate as BFI_IOC_FAIL 339 * in the failure case and now, if the fwstate is not 340 * BFI_IOC_FAIL it implies that the other PCI fn have 341 * reinitialized the ASIC or this IOC got disabled, so 342 * return TRUE. 343 */ 344 if (fwstate == BFI_IOC_UNINIT || 345 fwstate == BFI_IOC_INITING || 346 fwstate == BFI_IOC_DISABLED || 347 fwstate == BFI_IOC_MEMTEST || 348 fwstate == BFI_IOC_OP) 349 return BFA_TRUE; 350 else { 351 alt_fwstate = bfa_ioc_cb_get_alt_ioc_fwstate(ioc); 352 if (alt_fwstate == BFI_IOC_FAIL || 353 alt_fwstate == BFI_IOC_DISABLED || 354 alt_fwstate == BFI_IOC_UNINIT || 355 alt_fwstate == BFI_IOC_INITING || 356 alt_fwstate == BFI_IOC_MEMTEST) 357 return BFA_TRUE; 358 else 359 return BFA_FALSE; 360 } 361} 362 363bfa_status_t 364bfa_ioc_cb_pll_init(void __iomem *rb, enum bfi_asic_mode fcmode) 365{ 366 u32 pll_sclk, pll_fclk, join_bits; 367 368 pll_sclk = __APP_PLL_SCLK_ENABLE | __APP_PLL_SCLK_LRESETN | 369 __APP_PLL_SCLK_P0_1(3U) | 370 __APP_PLL_SCLK_JITLMT0_1(3U) | 371 __APP_PLL_SCLK_CNTLMT0_1(3U); 372 pll_fclk = __APP_PLL_LCLK_ENABLE | __APP_PLL_LCLK_LRESETN | 373 __APP_PLL_LCLK_RSEL200500 | __APP_PLL_LCLK_P0_1(3U) | 374 __APP_PLL_LCLK_JITLMT0_1(3U) | 375 __APP_PLL_LCLK_CNTLMT0_1(3U); 376 join_bits = readl(rb + BFA_IOC0_STATE_REG) & 377 BFA_IOC_CB_JOIN_MASK; 378 writel((BFI_IOC_UNINIT | join_bits), (rb + BFA_IOC0_STATE_REG)); 379 join_bits = readl(rb + BFA_IOC1_STATE_REG) & 380 BFA_IOC_CB_JOIN_MASK; 381 writel((BFI_IOC_UNINIT | join_bits), (rb + BFA_IOC1_STATE_REG)); 382 writel(0xffffffffU, (rb + HOSTFN0_INT_MSK)); 383 writel(0xffffffffU, (rb + HOSTFN1_INT_MSK)); 384 writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS)); 385 writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS)); 386 writel(0xffffffffU, (rb + HOSTFN0_INT_MSK)); 387 writel(0xffffffffU, (rb + HOSTFN1_INT_MSK)); 388 writel(__APP_PLL_SCLK_LOGIC_SOFT_RESET, rb + APP_PLL_SCLK_CTL_REG); 389 writel(__APP_PLL_SCLK_BYPASS | __APP_PLL_SCLK_LOGIC_SOFT_RESET, 390 rb + APP_PLL_SCLK_CTL_REG); 391 writel(__APP_PLL_LCLK_LOGIC_SOFT_RESET, rb + APP_PLL_LCLK_CTL_REG); 392 writel(__APP_PLL_LCLK_BYPASS | __APP_PLL_LCLK_LOGIC_SOFT_RESET, 393 rb + APP_PLL_LCLK_CTL_REG); 394 udelay(2); 395 writel(__APP_PLL_SCLK_LOGIC_SOFT_RESET, rb + APP_PLL_SCLK_CTL_REG); 396 writel(__APP_PLL_LCLK_LOGIC_SOFT_RESET, rb + APP_PLL_LCLK_CTL_REG); 397 writel(pll_sclk | __APP_PLL_SCLK_LOGIC_SOFT_RESET, 398 rb + APP_PLL_SCLK_CTL_REG); 399 writel(pll_fclk | __APP_PLL_LCLK_LOGIC_SOFT_RESET, 400 rb + APP_PLL_LCLK_CTL_REG); 401 udelay(2000); 402 writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS)); 403 writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS)); 404 writel(pll_sclk, (rb + APP_PLL_SCLK_CTL_REG)); 405 writel(pll_fclk, (rb + APP_PLL_LCLK_CTL_REG)); 406 407 return BFA_STATUS_OK; 408} 409