1menuconfig REGULATOR
2	bool "Voltage and Current Regulator Support"
3	help
4	  Generic Voltage and Current Regulator support.
5
6	  This framework is designed to provide a generic interface to voltage
7	  and current regulators within the Linux kernel. It's intended to
8	  provide voltage and current control to client or consumer drivers and
9	  also provide status information to user space applications through a
10	  sysfs interface.
11
12	  The intention is to allow systems to dynamically control regulator
13	  output in order to save power and prolong battery life. This applies
14	  to both voltage regulators (where voltage output is controllable) and
15	  current sinks (where current output is controllable).
16
17	  This framework safely compiles out if not selected so that client
18	  drivers can still be used in systems with no software controllable
19	  regulators.
20
21	  If unsure, say no.
22
23
24if REGULATOR
25
26config REGULATOR_DEBUG
27	bool "Regulator debug support"
28	help
29	  Say yes here to enable debugging support.
30
31config REGULATOR_FIXED_VOLTAGE
32	tristate "Fixed voltage regulator support"
33	help
34	  This driver provides support for fixed voltage regulators,
35	  useful for systems which use a combination of software
36	  managed regulators and simple non-configurable regulators.
37
38config REGULATOR_VIRTUAL_CONSUMER
39	tristate "Virtual regulator consumer support"
40	help
41	  This driver provides a virtual consumer for the voltage and
42	  current regulator API which provides sysfs controls for
43	  configuring the supplies requested.  This is mainly useful
44	  for test purposes.
45
46	  If unsure, say no.
47
48config REGULATOR_USERSPACE_CONSUMER
49	tristate "Userspace regulator consumer support"
50	help
51	  There are some classes of devices that are controlled entirely
52	  from user space. Userspace consumer driver provides ability to
53	  control power supplies for such devices.
54
55	  If unsure, say no.
56
57config REGULATOR_88PM800
58	tristate "Marvell 88PM800 Power regulators"
59	depends on MFD_88PM800
60	help
61	  This driver supports Marvell 88PM800 voltage regulator chips.
62	  It delivers digitally programmable output,
63	  the voltage is programmed via I2C interface.
64	  It's suitable to support PXA988 chips to control VCC_MAIN and
65	  various voltages.
66
67config REGULATOR_88PM8607
68	tristate "Marvell 88PM8607 Power regulators"
69	depends on MFD_88PM860X=y
70	help
71	  This driver supports 88PM8607 voltage regulator chips.
72
73config REGULATOR_ACT8865
74	tristate "Active-semi act8865 voltage regulator"
75	depends on I2C
76	select REGMAP_I2C
77	help
78	  This driver controls a active-semi act8865 voltage output
79	  regulator via I2C bus.
80
81config REGULATOR_AD5398
82	tristate "Analog Devices AD5398/AD5821 regulators"
83	depends on I2C
84	help
85	  This driver supports AD5398 and AD5821 current regulator chips.
86	  If building into module, its name is ad5398.ko.
87
88config REGULATOR_ANATOP
89	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
90	depends on MFD_SYSCON
91	help
92	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
93	  regulators. It is recommended that this option be
94	  enabled on i.MX6 platform.
95
96config REGULATOR_AAT2870
97	tristate "AnalogicTech AAT2870 Regulators"
98	depends on MFD_AAT2870_CORE
99	help
100	  If you have a AnalogicTech AAT2870 say Y to enable the
101	  regulator driver.
102
103config REGULATOR_AB3100
104	tristate "ST-Ericsson AB3100 Regulator functions"
105	depends on AB3100_CORE
106	default y if AB3100_CORE
107	help
108	 These regulators correspond to functionality in the
109	 AB3100 analog baseband dealing with power regulators
110	 for the system.
111
112config REGULATOR_AB8500
113	bool "ST-Ericsson AB8500 Power Regulators"
114	depends on AB8500_CORE
115	help
116	  This driver supports the regulators found on the ST-Ericsson mixed
117	  signal AB8500 PMIC
118
119config REGULATOR_ARIZONA
120	tristate "Wolfson Arizona class devices"
121	depends on MFD_ARIZONA
122	depends on SND_SOC
123	help
124	  Support for the regulators found on Wolfson Arizona class
125	  devices.
126
127config REGULATOR_AS3711
128	tristate "AS3711 PMIC"
129	depends on MFD_AS3711
130	help
131	  This driver provides support for the voltage regulators on the
132	  AS3711 PMIC
133
134config REGULATOR_AS3722
135	tristate "AMS AS3722 PMIC Regulators"
136	depends on MFD_AS3722
137	help
138	  This driver provides support for the voltage regulators on the
139	  AS3722 PMIC. This will enable support for all the software
140	  controllable DCDC/LDO regulators.
141
142config REGULATOR_AXP20X
143	tristate "X-POWERS AXP20X PMIC Regulators"
144	depends on MFD_AXP20X
145	help
146	  This driver provides support for the voltage regulators on the
147	  AXP20X PMIC.
148
149config REGULATOR_BCM590XX
150	tristate "Broadcom BCM590xx PMU Regulators"
151	depends on MFD_BCM590XX
152	help
153	  This driver provides support for the voltage regulators on the
154	  BCM590xx PMUs. This will enable support for the software
155	  controllable LDO/Switching regulators.
156
157config REGULATOR_DA903X
158	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
159	depends on PMIC_DA903X
160	help
161	  Say y here to support the BUCKs and LDOs regulators found on
162	  Dialog Semiconductor DA9030/DA9034 PMIC.
163
164config REGULATOR_DA9052
165	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
166	depends on PMIC_DA9052
167	help
168	  This driver supports the voltage regulators of DA9052-BC and
169	  DA9053-AA/Bx PMIC.
170
171config REGULATOR_DA9055
172	tristate "Dialog Semiconductor DA9055 regulators"
173	depends on MFD_DA9055
174	help
175	  Say y here to support the BUCKs and LDOs regulators found on
176	  Dialog Semiconductor DA9055 PMIC.
177
178	  This driver can also be built as a module. If so, the module
179	  will be called da9055-regulator.
180
181config REGULATOR_DA9063
182	tristate "Dialog Semiconductor DA9063 regulators"
183	depends on MFD_DA9063
184	help
185	  Say y here to support the BUCKs and LDOs regulators found on
186	  DA9063 PMICs.
187
188	  This driver can also be built as a module. If so, the module
189	  will be called da9063-regulator.
190
191config REGULATOR_DA9210
192	tristate "Dialog Semiconductor DA9210 regulator"
193	depends on I2C
194	select REGMAP_I2C
195	help
196	  Say y here to support for the Dialog Semiconductor DA9210.
197	  The DA9210 is a multi-phase synchronous step down
198	  converter 12A DC-DC Buck controlled through an I2C
199	  interface.
200
201config REGULATOR_DA9211
202	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
203	depends on I2C
204	select REGMAP_I2C
205	help
206	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
207	  /DA9213/DA9214.
208	  The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
209	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
210	  interface.
211
212config REGULATOR_DBX500_PRCMU
213	bool
214
215config REGULATOR_DB8500_PRCMU
216	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
217	depends on MFD_DB8500_PRCMU
218	select REGULATOR_DBX500_PRCMU
219	help
220	  This driver supports the voltage domain regulators controlled by the
221	  DB8500 PRCMU
222
223config REGULATOR_FAN53555
224	tristate "Fairchild FAN53555 Regulator"
225	depends on I2C
226	select REGMAP_I2C
227	help
228	  This driver supports Fairchild FAN53555 Digitally Programmable
229	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
230	  regulator that delivers a digitally programmable output from an
231	  input voltage supply of 2.5V to 5.5V. The output voltage is
232	  programmed through an I2C interface.
233
234config REGULATOR_GPIO
235	tristate "GPIO regulator support"
236	depends on GPIOLIB
237	help
238	  This driver provides support for regulators that can be
239	  controlled via gpios.
240	  It is capable of supporting current and voltage regulators
241	  and the platform has to provide a mapping of GPIO-states
242	  to target volts/amps.
243
244config REGULATOR_HI6421
245	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
246	depends on MFD_HI6421_PMIC && OF
247	help
248	  This driver provides support for the voltage regulators on the
249	  HiSilicon Hi6421 PMU / Codec IC.
250	  Hi6421 is a multi-function device which, on regulator part, provides
251	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
252	  of them come with support to either ECO (idle) or sleep mode.
253
254config REGULATOR_ISL9305
255	tristate "Intersil ISL9305 regulator"
256	depends on I2C
257	select REGMAP_I2C
258	help
259	  This driver supports ISL9305 voltage regulator chip.
260
261config REGULATOR_ISL6271A
262	tristate "Intersil ISL6271A Power regulator"
263	depends on I2C
264	help
265	  This driver supports ISL6271A voltage regulator chip.
266
267config REGULATOR_LP3971
268	tristate "National Semiconductors LP3971 PMIC regulator driver"
269	depends on I2C
270	help
271	 Say Y here to support the voltage regulators and convertors
272	 on National Semiconductors LP3971 PMIC
273
274config REGULATOR_LP3972
275	tristate "National Semiconductors LP3972 PMIC regulator driver"
276	depends on I2C
277	help
278	 Say Y here to support the voltage regulators and convertors
279	 on National Semiconductors LP3972 PMIC
280
281config REGULATOR_LP872X
282	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
283	depends on I2C
284	select REGMAP_I2C
285	help
286	  This driver supports LP8720/LP8725 PMIC
287
288config REGULATOR_LP8755
289	tristate "TI LP8755 High Performance PMU driver"
290	depends on I2C
291	select REGMAP_I2C
292	help
293	  This driver supports LP8755 High Performance PMU driver. This
294	  chip contains six step-down DC/DC converters which can support
295	  9 mode multiphase configuration.
296
297config REGULATOR_LP8788
298	tristate "TI LP8788 Power Regulators"
299	depends on MFD_LP8788
300	help
301	  This driver supports LP8788 voltage regulator chip.
302
303config REGULATOR_LTC3589
304	tristate "LTC3589 8-output voltage regulator"
305	depends on I2C
306	select REGMAP_I2C
307	help
308	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
309	  8-output regulators controlled via I2C.
310
311config REGULATOR_MAX14577
312	tristate "Maxim 14577/77836 regulator"
313	depends on MFD_MAX14577
314	help
315	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
316	  The MAX14577 regulators include safeout LDO and charger current
317	  regulator. The MAX77836 has two additional LDOs.
318
319config REGULATOR_MAX1586
320	tristate "Maxim 1586/1587 voltage regulator"
321	depends on I2C
322	help
323	  This driver controls a Maxim 1586 or 1587 voltage output
324	  regulator via I2C bus. The provided regulator is suitable
325	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
326
327config REGULATOR_MAX8649
328	tristate "Maxim 8649 voltage regulator"
329	depends on I2C
330	select REGMAP_I2C
331	help
332	  This driver controls a Maxim 8649 voltage output regulator via
333	  I2C bus.
334
335config REGULATOR_MAX8660
336	tristate "Maxim 8660/8661 voltage regulator"
337	depends on I2C
338	help
339	  This driver controls a Maxim 8660/8661 voltage output
340	  regulator via I2C bus.
341
342config REGULATOR_MAX8907
343	tristate "Maxim 8907 voltage regulator"
344	depends on MFD_MAX8907
345	help
346	  This driver controls a Maxim 8907 voltage output regulator
347	  via I2C bus. The provided regulator is suitable for Tegra
348	  chip to control Step-Down DC-DC and LDOs.
349
350config REGULATOR_MAX8925
351	tristate "Maxim MAX8925 Power Management IC"
352	depends on MFD_MAX8925
353	help
354	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
355
356config REGULATOR_MAX8952
357	tristate "Maxim MAX8952 Power Management IC"
358	depends on I2C
359	help
360	  This driver controls a Maxim 8952 voltage output regulator
361	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
362	  modes ranging from 0.77V to 1.40V by 0.01V steps.
363
364config REGULATOR_MAX8973
365	tristate "Maxim MAX8973 voltage regulator "
366	depends on I2C
367	select REGMAP_I2C
368	help
369	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
370	  switching regulator delievers up to 9A of output current. Each
371	  phase operates at a 2MHz fixed frequency with a 120 deg shift
372	  from the adjacent phase, allowing the use of small magnetic component.
373
374config REGULATOR_MAX8997
375	tristate "Maxim 8997/8966 regulator"
376	depends on MFD_MAX8997
377	help
378	  This driver controls a Maxim 8997/8966 regulator
379	  via I2C bus. The provided regulator is suitable for S5PC110,
380	  S5PV210, and Exynos-4 chips to control VCC_CORE and
381	  VCC_USIM voltages.
382
383config REGULATOR_MAX8998
384	tristate "Maxim 8998 voltage regulator"
385	depends on MFD_MAX8998
386	help
387	  This driver controls a Maxim 8998 voltage output regulator
388	  via I2C bus. The provided regulator is suitable for S3C6410
389	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
390
391config REGULATOR_MAX77686
392	tristate "Maxim 77686 regulator"
393	depends on MFD_MAX77686
394	help
395	  This driver controls a Maxim 77686 regulator
396	  via I2C bus. The provided regulator is suitable for
397	  Exynos-4 chips to control VARM and VINT voltages.
398
399config REGULATOR_MAX77693
400	tristate "Maxim MAX77693 regulator"
401	depends on MFD_MAX77693
402	help
403	  This driver controls a Maxim 77693 regulator via I2C bus.
404	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
405	  and one current regulator 'CHARGER'. This is suitable for
406	  Exynos-4x12 chips.
407
408config REGULATOR_MAX77802
409	tristate "Maxim 77802 regulator"
410	depends on MFD_MAX77686
411	help
412	  This driver controls a Maxim 77802 regulator
413	  via I2C bus. The provided regulator is suitable for
414	  Exynos5420/Exynos5800 SoCs to control various voltages.
415	  It includes support for control of voltage and ramp speed.
416
417config REGULATOR_MAX77843
418	tristate "Maxim 77843 regulator"
419	depends on MFD_MAX77843
420	help
421	  This driver controls a Maxim 77843 regulator.
422	  The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
423	  This is suitable for Exynos5433 SoC chips.
424
425config REGULATOR_MC13XXX_CORE
426	tristate
427
428config REGULATOR_MC13783
429	tristate "Freescale MC13783 regulator driver"
430	depends on MFD_MC13XXX
431	select REGULATOR_MC13XXX_CORE
432	help
433	  Say y here to support the regulators found on the Freescale MC13783
434	  PMIC.
435
436config REGULATOR_MC13892
437	tristate "Freescale MC13892 regulator driver"
438	depends on MFD_MC13XXX
439	select REGULATOR_MC13XXX_CORE
440	help
441	  Say y here to support the regulators found on the Freescale MC13892
442	  PMIC.
443
444config REGULATOR_MT6397
445	tristate "MediaTek MT6397 PMIC"
446	depends on MFD_MT6397
447	help
448	  Say y here to select this option to enable the power regulator of
449	  MediaTek MT6397 PMIC.
450	  This driver supports the control of different power rails of device
451	  through regulator interface.
452
453config REGULATOR_PALMAS
454	tristate "TI Palmas PMIC Regulators"
455	depends on MFD_PALMAS
456	help
457	  If you wish to control the regulators on the Palmas series of
458	  chips say Y here. This will enable support for all the software
459	  controllable SMPS/LDO regulators.
460
461	  The regulators available on Palmas series chips vary depending
462	  on the muxing. This is handled automatically in the driver by
463	  reading the mux info from OTP.
464
465config REGULATOR_PBIAS
466	tristate "PBIAS OMAP regulator driver"
467	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
468	help
469	 Say y here to support pbias regulator for mmc1:SD card i/o
470	 on OMAP SoCs.
471	 This driver provides support for OMAP pbias modelled
472	 regulators.
473
474config REGULATOR_PCAP
475	tristate "Motorola PCAP2 regulator driver"
476	depends on EZX_PCAP
477	help
478	 This driver provides support for the voltage regulators of the
479	 PCAP2 PMIC.
480
481config REGULATOR_PCF50633
482	tristate "NXP PCF50633 regulator driver"
483	depends on MFD_PCF50633
484	help
485	 Say Y here to support the voltage regulators and convertors
486	 on PCF50633
487
488config REGULATOR_PFUZE100
489	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
490	depends on I2C
491	select REGMAP_I2C
492	help
493	  Say y here to support the regulators found on the Freescale
494	  PFUZE100/PFUZE200 PMIC.
495
496config REGULATOR_PWM
497	tristate "PWM voltage regulator"
498	depends on PWM
499	help
500	  This driver supports PWM controlled voltage regulators. PWM
501	  duty cycle can increase or decrease the voltage.
502
503config REGULATOR_QCOM_RPM
504	tristate "Qualcomm RPM regulator driver"
505	depends on MFD_QCOM_RPM
506	help
507	  If you say yes to this option, support will be included for the
508	  regulators exposed by the Resource Power Manager found in Qualcomm
509	  8660, 8960 and 8064 based devices.
510
511	  Say M here if you want to include support for the regulators on the
512	  Qualcomm RPM as a module. The module will be named
513	  "qcom_rpm-regulator".
514
515config REGULATOR_RC5T583
516	tristate "RICOH RC5T583 Power regulators"
517	depends on MFD_RC5T583
518	help
519	  Select this option to enable the power regulator of RICOH
520	  PMIC RC5T583.
521	  This driver supports the control of different power rails of device
522	  through regulator interface. The device supports multiple DCDC/LDO
523	  outputs which can be controlled by i2c communication.
524
525config REGULATOR_RK808
526	tristate "Rockchip RK808 Power regulators"
527	depends on MFD_RK808
528	help
529	  Select this option to enable the power regulator of ROCKCHIP
530	  PMIC RK808.
531	  This driver supports the control of different power rails of device
532	  through regulator interface. The device supports multiple DCDC/LDO
533	  outputs which can be controlled by i2c communication.
534
535config REGULATOR_RN5T618
536	tristate "Ricoh RN5T618 voltage regulators"
537	depends on MFD_RN5T618
538	help
539	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.
540
541config REGULATOR_RT5033
542	tristate "Richtek RT5033 Regulators"
543	depends on MFD_RT5033
544	help
545	  This adds support for voltage and current regulators in Richtek
546	  RT5033 PMIC. The device supports multiple regulators like
547	  current source, LDO and Buck.
548
549config REGULATOR_S2MPA01
550	tristate "Samsung S2MPA01 voltage regulator"
551	depends on MFD_SEC_CORE
552	help
553	 This driver controls Samsung S2MPA01 voltage output regulator
554	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
555
556config REGULATOR_S2MPS11
557	tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
558	depends on MFD_SEC_CORE
559	help
560	 This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
561	 output regulator via I2C bus. The chip is comprised of high efficient
562	 Buck converters including Dual-Phase Buck converter, Buck-Boost
563	 converter, various LDOs.
564
565config REGULATOR_S5M8767
566	tristate "Samsung S5M8767A voltage regulator"
567	depends on MFD_SEC_CORE
568	help
569	 This driver supports a Samsung S5M8767A voltage output regulator
570	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
571	 supports DVS mode with 8bits of output voltage control.
572
573config REGULATOR_SKY81452
574	tristate "Skyworks Solutions SKY81452 voltage regulator"
575	depends on MFD_SKY81452
576	help
577	  This driver supports Skyworks SKY81452 voltage output regulator
578	  via I2C bus. SKY81452 has one voltage linear regulator can be
579	  programmed from 4.5V to 20V.
580
581	  This driver can also be built as a module. If so, the module
582	  will be called sky81452-regulator.
583
584config REGULATOR_TI_ABB
585	tristate "TI Adaptive Body Bias on-chip LDO"
586	depends on ARCH_OMAP
587	help
588	  Select this option to support Texas Instruments' on-chip Adaptive Body
589	  Bias (ABB) LDO regulators. It is recommended that this option be
590	  enabled on required TI SoC. Certain Operating Performance Points
591	  on TI SoCs may be unstable without enabling this as it provides
592	  device specific optimized bias to allow/optimize functionality.
593
594config REGULATOR_STW481X_VMMC
595	bool "ST Microelectronics STW481X VMMC regulator"
596	depends on MFD_STW481X
597	default y if MFD_STW481X
598	help
599	  This driver supports the internal VMMC regulator in the STw481x
600	  PMIC chips.
601
602config REGULATOR_TPS51632
603	tristate "TI TPS51632 Power Regulator"
604	depends on I2C
605	select REGMAP_I2C
606	help
607	  This driver supports TPS51632 voltage regulator chip.
608	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
609	  with Serial VID control and DVFS.
610	  The voltage output can be configure through I2C interface or PWM
611	  interface.
612
613config REGULATOR_TPS6105X
614	tristate "TI TPS6105X Power regulators"
615	depends on TPS6105X
616	default y if TPS6105X
617	help
618	  This driver supports TPS61050/TPS61052 voltage regulator chips.
619	  It is a single boost converter primarily for white LEDs and
620	  audio amplifiers.
621
622config REGULATOR_TPS62360
623	tristate "TI TPS6236x Power Regulator"
624	depends on I2C
625	select REGMAP_I2C
626	help
627	  This driver supports TPS6236x voltage regulator chip. This
628	  regulator is meant for processor core supply. This chip is
629	  high-frequency synchronous step down dc-dc converter optimized
630	  for battery-powered portable applications.
631
632config REGULATOR_TPS65023
633	tristate "TI TPS65023 Power regulators"
634	depends on I2C
635	select REGMAP_I2C
636	help
637	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
638	  three step-down converters and two general-purpose LDO voltage regulators.
639	  It supports TI's software based Class-2 SmartReflex implementation.
640
641config REGULATOR_TPS6507X
642	tristate "TI TPS6507X Power regulators"
643	depends on I2C
644	help
645	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
646	  three step-down converters and two general-purpose LDO voltage regulators.
647	  It supports TI's software based Class-2 SmartReflex implementation.
648
649config REGULATOR_TPS65090
650	tristate "TI TPS65090 Power regulator"
651	depends on MFD_TPS65090
652	help
653	  This driver provides support for the voltage regulators on the
654	  TI TPS65090 PMIC.
655
656config REGULATOR_TPS65217
657	tristate "TI TPS65217 Power regulators"
658	depends on MFD_TPS65217
659	help
660	  This driver supports TPS65217 voltage regulator chips. TPS65217
661	  provides three step-down converters and four general-purpose LDO
662	  voltage regulators. It supports software based voltage control
663	  for different voltage domains
664
665config REGULATOR_TPS65218
666	tristate "TI TPS65218 Power regulators"
667	depends on MFD_TPS65218 && OF
668	help
669	  This driver supports TPS65218 voltage regulator chips. TPS65218
670	  provides six step-down converters and one general-purpose LDO
671	  voltage regulators. It supports software based voltage control
672	  for different voltage domains
673
674config REGULATOR_TPS6524X
675	tristate "TI TPS6524X Power regulators"
676	depends on SPI
677	help
678	  This driver supports TPS6524X voltage regulator chips. TPS6524X
679	  provides three step-down converters and two general-purpose LDO
680	  voltage regulators.  This device is interfaced using a customized
681	  serial interface currently supported on the sequencer serial
682	  port controller.
683
684config REGULATOR_TPS6586X
685	tristate "TI TPS6586X Power regulators"
686	depends on MFD_TPS6586X
687	help
688	  This driver supports TPS6586X voltage regulator chips.
689
690config REGULATOR_TPS65910
691	tristate "TI TPS65910/TPS65911 Power Regulators"
692	depends on MFD_TPS65910
693	help
694	  This driver supports TPS65910/TPS65911 voltage regulator chips.
695
696config REGULATOR_TPS65912
697	tristate "TI TPS65912 Power regulator"
698	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
699	help
700	    This driver supports TPS65912 voltage regulator chip.
701
702config REGULATOR_TPS80031
703	tristate "TI TPS80031/TPS80032 power regualtor driver"
704	depends on MFD_TPS80031
705	help
706	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
707	  Path and Battery Charger. It has 5 configurable step-down
708	  converters, 11 general purpose LDOs, VBUS generator and digital
709	  output to control regulators.
710
711config REGULATOR_TWL4030
712	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
713	depends on TWL4030_CORE
714	help
715	  This driver supports the voltage regulators provided by
716	  this family of companion chips.
717
718config REGULATOR_VEXPRESS
719	tristate "Versatile Express regulators"
720	depends on VEXPRESS_CONFIG
721	help
722	  This driver provides support for voltage regulators available
723	  on the ARM Ltd's Versatile Express platform.
724
725config REGULATOR_WM831X
726	tristate "Wolfson Microelectronics WM831x PMIC regulators"
727	depends on MFD_WM831X
728	help
729	  Support the voltage and current regulators of the WM831x series
730	  of PMIC devices.
731
732config REGULATOR_WM8350
733	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
734	depends on MFD_WM8350
735	help
736	  This driver provides support for the voltage and current regulators
737	  of the WM8350 AudioPlus PMIC.
738
739config REGULATOR_WM8400
740	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
741	depends on MFD_WM8400
742	help
743	  This driver provides support for the voltage regulators of the
744	  WM8400 AudioPlus PMIC.
745
746config REGULATOR_WM8994
747	tristate "Wolfson Microelectronics WM8994 CODEC"
748	depends on MFD_WM8994
749	help
750	  This driver provides support for the voltage regulators on the
751	  WM8994 CODEC.
752
753endif
754
755