1#
2# Wireless LAN device configuration
3#
4
5menuconfig WLAN
6	bool "Wireless LAN"
7	depends on !S390
8	depends on NET
9	select WIRELESS
10	default y
11	---help---
12	  This section contains all the pre 802.11 and 802.11 wireless
13	  device drivers. For a complete list of drivers and documentation
14	  on them refer to the wireless wiki:
15
16	  http://wireless.kernel.org/en/users/Drivers
17
18if WLAN
19
20config PCMCIA_RAYCS
21	tristate "Aviator/Raytheon 2.4GHz wireless support"
22	depends on PCMCIA
23	select WIRELESS_EXT
24	select WEXT_SPY
25	select WEXT_PRIV
26	---help---
27	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
28	  (PC-card) wireless Ethernet networking card to your computer.
29	  Please read the file <file:Documentation/networking/ray_cs.txt> for
30	  details.
31
32	  To compile this driver as a module, choose M here: the module will be
33	  called ray_cs.  If unsure, say N.
34
35config LIBERTAS_THINFIRM
36	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
37	depends on MAC80211
38	select FW_LOADER
39	---help---
40	  A library for Marvell Libertas 8xxx devices using thinfirm.
41
42config LIBERTAS_THINFIRM_DEBUG
43	bool "Enable full debugging output in the Libertas thin firmware module."
44	depends on LIBERTAS_THINFIRM
45	---help---
46	  Debugging support.
47
48config LIBERTAS_THINFIRM_USB
49	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
50	depends on LIBERTAS_THINFIRM && USB
51	---help---
52	  A driver for Marvell Libertas 8388 USB devices using thinfirm.
53
54config AIRO
55	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
56	depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
57	select WIRELESS_EXT
58	select CRYPTO
59	select WEXT_SPY
60	select WEXT_PRIV
61	---help---
62	  This is the standard Linux driver to support Cisco/Aironet ISA and
63	  PCI 802.11 wireless cards.
64	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
65	  - with or without encryption) as well as card before the Cisco
66	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
67
68	  This driver support both the standard Linux Wireless Extensions
69	  and Cisco proprietary API, so both the Linux Wireless Tools and the
70	  Cisco Linux utilities can be used to configure the card.
71
72	  The driver can be compiled as a module and will be named "airo".
73
74config ATMEL
75      tristate "Atmel at76c50x chipset  802.11b support"
76      depends on CFG80211 && (PCI || PCMCIA)
77      select WIRELESS_EXT
78      select WEXT_PRIV
79      select FW_LOADER
80      select CRC32
81       ---help---
82        A driver 802.11b wireless cards based on the Atmel fast-vnet
83        chips. This driver supports standard Linux wireless extensions.
84
85        Many  cards based on this chipset do not have flash memory
86        and need their firmware loaded at start-up. If yours is
87        one of these, you will need to provide a firmware image
88        to be loaded into the card by the driver. The Atmel
89        firmware package can be downloaded from
90        <http://www.thekelleys.org.uk/atmel>
91
92config PCI_ATMEL
93      tristate "Atmel at76c506 PCI cards"
94      depends on ATMEL && PCI
95       ---help---
96        Enable support for PCI and mini-PCI cards containing the
97        Atmel at76c506 chip.
98
99config PCMCIA_ATMEL
100	tristate "Atmel at76c502/at76c504 PCMCIA cards"
101	depends on ATMEL && PCMCIA
102	select WIRELESS_EXT
103	select FW_LOADER
104	select CRC32
105	---help---
106	  Enable support for PCMCIA cards containing the
107	  Atmel at76c502 and at76c504 chips.
108
109config AT76C50X_USB
110        tristate "Atmel at76c503/at76c505/at76c505a USB cards"
111        depends on MAC80211 && USB
112        select FW_LOADER
113        ---help---
114          Enable support for USB Wireless devices using Atmel at76c503,
115          at76c505 or at76c505a chips.
116
117config AIRO_CS
118	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
119	depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
120	select WIRELESS_EXT
121	select WEXT_SPY
122	select WEXT_PRIV
123	select CRYPTO
124	select CRYPTO_AES
125	---help---
126	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
127	  802.11 wireless cards.  This driver is the same as the Aironet
128	  driver part of the Linux Pcmcia package.
129	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
130	  - with or without encryption) as well as card before the Cisco
131	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
132	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
133	  802.11b cards.
134
135	  This driver support both the standard Linux Wireless Extensions
136	  and Cisco proprietary API, so both the Linux Wireless Tools and the
137	  Cisco Linux utilities can be used to configure the card.
138
139config PCMCIA_WL3501
140	tristate "Planet WL3501 PCMCIA cards"
141	depends on CFG80211 && PCMCIA
142	select WIRELESS_EXT
143	select WEXT_SPY
144	help
145	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
146	  It has basic support for Linux wireless extensions and initial
147	  micro support for ethtool.
148
149config PRISM54
150	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
151	depends on PCI
152	select WIRELESS_EXT
153	select WEXT_SPY
154	select WEXT_PRIV
155	select FW_LOADER
156	---help---
157	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
158	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
159	  p54pci supports FullMAC PCI/Cardbus devices as well.
160
161	  For more information refer to the p54 wiki:
162
163	  http://wireless.kernel.org/en/users/Drivers/p54
164
165	  Note: You need a motherboard with DMA support to use any of these cards
166
167	  When built as module you get the module prism54
168
169config USB_ZD1201
170	tristate "USB ZD1201 based Wireless device support"
171	depends on CFG80211 && USB
172	select WIRELESS_EXT
173	select WEXT_PRIV
174	select FW_LOADER
175	---help---
176	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
177	  ZD1201 chip.
178
179	  This driver makes the adapter appear as a normal Ethernet interface,
180	  typically on wlan0.
181
182	  The zd1201 device requires external firmware to be loaded.
183	  This can be found at http://linux-lc100020.sourceforge.net/
184
185	  To compile this driver as a module, choose M here: the
186	  module will be called zd1201.
187
188config USB_NET_RNDIS_WLAN
189	tristate "Wireless RNDIS USB support"
190	depends on USB
191	depends on CFG80211
192	select USB_NET_DRIVERS
193	select USB_USBNET
194	select USB_NET_CDCETHER
195	select USB_NET_RNDIS_HOST
196	---help---
197	  This is a driver for wireless RNDIS devices.
198	  These are USB based adapters found in devices such as:
199
200	  Buffalo WLI-U2-KG125S
201	  U.S. Robotics USR5421
202	  Belkin F5D7051
203	  Linksys WUSB54GSv2
204	  Linksys WUSB54GSC
205	  Asus WL169gE
206	  Eminent EM4045
207	  BT Voyager 1055
208	  Linksys WUSB54GSv1
209	  U.S. Robotics USR5420
210	  BUFFALO WLI-USB-G54
211
212	  All of these devices are based on Broadcom 4320 chip which is the
213	  only wireless RNDIS chip known to date.
214
215	  If you choose to build a module, it'll be called rndis_wlan.
216
217source "drivers/net/wireless/rtl818x/Kconfig"
218
219config ADM8211
220	tristate "ADMtek ADM8211 support"
221	depends on MAC80211 && PCI
222	select CRC32
223	select EEPROM_93CX6
224	---help---
225	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
226	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
227
228	  Xterasys Cardbus XN-2411b
229	  Blitz NetWave Point PC
230	  TrendNet 221pc
231	  Belkin F5D6001
232	  SMC 2635W
233	  Linksys WPC11 v1
234	  Fiberline FL-WL-200X
235	  3com Office Connect (3CRSHPW796)
236	  Corega WLPCIB-11
237	  SMC 2602W V2 EU
238	  D-Link DWL-520 Revision C
239
240	  However, some of these cards have been replaced with other chips
241	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
242	  the Ralink RT2400 (SMC2635W) without a model number change.
243
244	  Thanks to Infineon-ADMtek for their support of this driver.
245
246config MAC80211_HWSIM
247	tristate "Simulated radio testing tool for mac80211"
248	depends on MAC80211
249	---help---
250	  This driver is a developer testing tool that can be used to test
251	  IEEE 802.11 networking stack (mac80211) functionality. This is not
252	  needed for normal wireless LAN usage and is only for testing. See
253	  Documentation/networking/mac80211_hwsim for more information on how
254	  to use this tool.
255
256	  To compile this driver as a module, choose M here: the module will be
257	  called mac80211_hwsim.  If unsure, say N.
258
259config MWL8K
260	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
261	depends on MAC80211 && PCI
262	---help---
263	  This driver supports Marvell TOPDOG 802.11 wireless cards.
264
265	  To compile this driver as a module, choose M here: the module
266	  will be called mwl8k.  If unsure, say N.
267
268source "drivers/net/wireless/ath/Kconfig"
269source "drivers/net/wireless/b43/Kconfig"
270source "drivers/net/wireless/b43legacy/Kconfig"
271source "drivers/net/wireless/brcm80211/Kconfig"
272source "drivers/net/wireless/hostap/Kconfig"
273source "drivers/net/wireless/ipw2x00/Kconfig"
274source "drivers/net/wireless/iwlwifi/Kconfig"
275source "drivers/net/wireless/iwlegacy/Kconfig"
276source "drivers/net/wireless/libertas/Kconfig"
277source "drivers/net/wireless/orinoco/Kconfig"
278source "drivers/net/wireless/p54/Kconfig"
279source "drivers/net/wireless/rt2x00/Kconfig"
280source "drivers/net/wireless/rtlwifi/Kconfig"
281source "drivers/net/wireless/ti/Kconfig"
282source "drivers/net/wireless/zd1211rw/Kconfig"
283source "drivers/net/wireless/mwifiex/Kconfig"
284source "drivers/net/wireless/cw1200/Kconfig"
285source "drivers/net/wireless/rsi/Kconfig"
286
287endif # WLAN
288