1/****************************************************************************** 2 * 3 * (C)Copyright 1998,1999 SysKonnect, 4 * a business unit of Schneider & Koch & Co. Datensysteme GmbH. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * The information in this file is provided "AS IS" without warranty. 12 * 13 ******************************************************************************/ 14 15#ifndef _HWM_ 16#define _HWM_ 17 18#include "mbuf.h" 19 20/* 21 * MACRO for DMA synchronization: 22 * The descriptor 'desc' is flushed for the device 'flag'. 23 * Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the 24 * adapter (DDI_DMA_SYNC_FORDEV). 25 * 26 * 'desc' Pointer to a Rx or Tx descriptor. 27 * 'flag' Flag for direction (view for CPU or DEVICE) that 28 * should be synchronized. 29 * 30 * Empty macros and defines are specified here. The real macro 31 * is os-specific and should be defined in osdef1st.h. 32 */ 33#ifndef DRV_BUF_FLUSH 34#define DRV_BUF_FLUSH(desc,flag) 35#define DDI_DMA_SYNC_FORCPU 36#define DDI_DMA_SYNC_FORDEV 37#endif 38 39 /* 40 * hardware modul dependent receive modes 41 */ 42#define RX_ENABLE_PASS_SMT 21 43#define RX_DISABLE_PASS_SMT 22 44#define RX_ENABLE_PASS_NSA 23 45#define RX_DISABLE_PASS_NSA 24 46#define RX_ENABLE_PASS_DB 25 47#define RX_DISABLE_PASS_DB 26 48#define RX_DISABLE_PASS_ALL 27 49#define RX_DISABLE_LLC_PROMISC 28 50#define RX_ENABLE_LLC_PROMISC 29 51 52 53#ifndef DMA_RD 54#define DMA_RD 1 /* memory -> hw */ 55#endif 56#ifndef DMA_WR 57#define DMA_WR 2 /* hw -> memory */ 58#endif 59#define SMT_BUF 0x80 60 61 /* 62 * bits of the frame status byte 63 */ 64#define EN_IRQ_EOF 0x02 /* get IRQ after end of frame transmission */ 65#define LOC_TX 0x04 /* send frame to the local SMT */ 66#define LAST_FRAG 0x08 /* last TxD of the frame */ 67#define FIRST_FRAG 0x10 /* first TxD of the frame */ 68#define LAN_TX 0x20 /* send frame to network if set */ 69#define RING_DOWN 0x40 /* error: unable to send, ring down */ 70#define OUT_OF_TXD 0x80 /* error: not enough TxDs available */ 71 72 73#ifndef NULL 74#define NULL 0 75#endif 76 77#ifdef LITTLE_ENDIAN 78#define HWM_REVERSE(x) (x) 79#else 80#define HWM_REVERSE(x) ((((x)<<24L)&0xff000000L) + \ 81 (((x)<< 8L)&0x00ff0000L) + \ 82 (((x)>> 8L)&0x0000ff00L) + \ 83 (((x)>>24L)&0x000000ffL)) 84#endif 85 86#define C_INDIC (1L<<25) 87#define A_INDIC (1L<<26) 88#define RD_FS_LOCAL 0x80 89 90 /* 91 * DEBUG FLAGS 92 */ 93#define DEBUG_SMTF 1 94#define DEBUG_SMT 2 95#define DEBUG_ECM 3 96#define DEBUG_RMT 4 97#define DEBUG_CFM 5 98#define DEBUG_PCM 6 99#define DEBUG_SBA 7 100#define DEBUG_ESS 8 101 102#define DB_HWM_RX 10 103#define DB_HWM_TX 11 104#define DB_HWM_GEN 12 105 106struct s_mbuf_pool { 107#ifndef MB_OUTSIDE_SMC 108 SMbuf mb[MAX_MBUF] ; /* mbuf pool */ 109#endif 110 SMbuf *mb_start ; /* points to the first mb */ 111 SMbuf *mb_free ; /* free queue */ 112} ; 113 114struct hwm_r { 115 /* 116 * hardware modul specific receive variables 117 */ 118 u_int len ; /* length of the whole frame */ 119 char *mb_pos ; /* SMbuf receive position */ 120} ; 121 122struct hw_modul { 123 /* 124 * All hardware modul specific variables 125 */ 126 struct s_mbuf_pool mbuf_pool ; 127 struct hwm_r r ; 128 129 union s_fp_descr volatile *descr_p ; /* points to the desriptor area */ 130 131 u_short pass_SMT ; /* pass SMT frames */ 132 u_short pass_NSA ; /* pass all NSA frames */ 133 u_short pass_DB ; /* pass Direct Beacon Frames */ 134 u_short pass_llc_promisc ; /* pass all llc frames (default ON) */ 135 136 SMbuf *llc_rx_pipe ; /* points to the first queued llc fr */ 137 SMbuf *llc_rx_tail ; /* points to the last queued llc fr */ 138 int queued_rx_frames ; /* number of queued frames */ 139 140 SMbuf *txd_tx_pipe ; /* points to first mb in the txd ring */ 141 SMbuf *txd_tx_tail ; /* points to last mb in the txd ring */ 142 int queued_txd_mb ; /* number of SMT MBufs in txd ring */ 143 144 int rx_break ; /* rev. was breaked because ind. off */ 145 int leave_isr ; /* leave fddi_isr immedeately if set */ 146 int isr_flag ; /* set, when HWM is entered from isr */ 147 /* 148 * variables for the current transmit frame 149 */ 150 struct s_smt_tx_queue *tx_p ; /* pointer to the transmit queue */ 151 u_long tx_descr ; /* tx descriptor for FORMAC+ */ 152 int tx_len ; /* tx frame length */ 153 SMbuf *tx_mb ; /* SMT tx MBuf pointer */ 154 char *tx_data ; /* data pointer to the SMT tx Mbuf */ 155 156 int detec_count ; /* counter for out of RxD condition */ 157 u_long rx_len_error ; /* rx len FORMAC != sum of fragments */ 158} ; 159 160 161/* 162 * DEBUG structs and macros 163 */ 164 165#ifdef DEBUG 166struct os_debug { 167 int hwm_rx ; 168 int hwm_tx ; 169 int hwm_gen ; 170} ; 171#endif 172 173#ifdef DEBUG 174#ifdef DEBUG_BRD 175#define DB_P smc->debug 176#else 177#define DB_P debug 178#endif 179 180#define DB_RX(a,b,c,lev) if (DB_P.d_os.hwm_rx >= (lev)) printf(a,b,c) 181#define DB_TX(a,b,c,lev) if (DB_P.d_os.hwm_tx >= (lev)) printf(a,b,c) 182#define DB_GEN(a,b,c,lev) if (DB_P.d_os.hwm_gen >= (lev)) printf(a,b,c) 183#else /* DEBUG */ 184#define DB_RX(a,b,c,lev) 185#define DB_TX(a,b,c,lev) 186#define DB_GEN(a,b,c,lev) 187#endif /* DEBUG */ 188 189#ifndef SK_BREAK 190#define SK_BREAK() 191#endif 192 193 194/* 195 * HWM Macros 196 */ 197 198/* 199 * BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS) 200 * u_long HWM_GET_TX_PHYS(txd) 201 * 202 * function MACRO (hardware module, hwmtm.h) 203 * This macro may be invoked by the OS-specific module to read 204 * the physical address of the specified TxD. 205 * 206 * para txd pointer to the TxD 207 * 208 * END_MANUAL_ENTRY 209 */ 210#define HWM_GET_TX_PHYS(txd) (u_long)AIX_REVERSE((txd)->txd_tbadr) 211 212/* 213 * BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN) 214 * int HWM_GET_TX_LEN(txd) 215 * 216 * function MACRO (hardware module, hwmtm.h) 217 * This macro may be invoked by the OS-specific module to read 218 * the fragment length of the specified TxD 219 * 220 * para rxd pointer to the TxD 221 * 222 * return the length of the fragment in bytes 223 * 224 * END_MANUAL_ENTRY 225 */ 226#define HWM_GET_TX_LEN(txd) ((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH) 227 228/* 229 * BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED) 230 * txd *HWM_GET_TX_USED(smc,queue) 231 * 232 * function MACRO (hardware module, hwmtm.h) 233 * This macro may be invoked by the OS-specific module to get the 234 * number of used TxDs for the queue, specified by the index. 235 * 236 * para queue the number of the send queue: Can be specified by 237 * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0) 238 * 239 * return number of used TxDs for this send queue 240 * 241 * END_MANUAL_ENTRY 242 */ 243#define HWM_GET_TX_USED(smc,queue) (int) (smc)->hw.fp.tx_q[queue].tx_used 244 245/* 246 * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD) 247 * txd *HWM_GET_CURR_TXD(smc,queue) 248 * 249 * function MACRO (hardware module, hwmtm.h) 250 * This macro may be invoked by the OS-specific module to get the 251 * pointer to the TxD which points to the current queue put 252 * position. 253 * 254 * para queue the number of the send queue: Can be specified by 255 * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0) 256 * 257 * return pointer to the current TxD 258 * 259 * END_MANUAL_ENTRY 260 */ 261#define HWM_GET_CURR_TXD(smc,queue) (struct s_smt_fp_txd volatile *)\ 262 (smc)->hw.fp.tx_q[queue].tx_curr_put 263 264/* 265 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN) 266 * int HWM_GET_RX_FRAG_LEN(rxd) 267 * 268 * function MACRO (hardware module, hwmtm.h) 269 * This macro may be invoked by the OS-specific module to read 270 * the fragment length of the specified RxD 271 * 272 * para rxd pointer to the RxD 273 * 274 * return the length of the fragment in bytes 275 * 276 * END_MANUAL_ENTRY 277 */ 278#define HWM_GET_RX_FRAG_LEN(rxd) ((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \ 279 RD_LENGTH) 280 281/* 282 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS) 283 * u_long HWM_GET_RX_PHYS(rxd) 284 * 285 * function MACRO (hardware module, hwmtm.h) 286 * This macro may be invoked by the OS-specific module to read 287 * the physical address of the specified RxD. 288 * 289 * para rxd pointer to the RxD 290 * 291 * return the RxD's physical pointer to the data fragment 292 * 293 * END_MANUAL_ENTRY 294 */ 295#define HWM_GET_RX_PHYS(rxd) (u_long)AIX_REVERSE((rxd)->rxd_rbadr) 296 297/* 298 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED) 299 * int HWM_GET_RX_USED(smc) 300 * 301 * function MACRO (hardware module, hwmtm.h) 302 * This macro may be invoked by the OS-specific module to get 303 * the count of used RXDs in receive queue 1. 304 * 305 * return the used RXD count of receive queue 1 306 * 307 * NOTE: Remember, because of an ASIC bug at least one RXD should be unused 308 * in the descriptor ring ! 309 * 310 * END_MANUAL_ENTRY 311 */ 312#define HWM_GET_RX_USED(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used) 313 314/* 315 * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE) 316 * int HWM_GET_RX_FREE(smc) 317 * 318 * function MACRO (hardware module, hwmtm.h) 319 * This macro may be invoked by the OS-specific module to get 320 * the rxd_free count of receive queue 1. 321 * 322 * return the rxd_free count of receive queue 1 323 * 324 * END_MANUAL_ENTRY 325 */ 326#define HWM_GET_RX_FREE(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1) 327 328/* 329 * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD) 330 * rxd *HWM_GET_CURR_RXD(smc) 331 * 332 * function MACRO (hardware module, hwmtm.h) 333 * This macro may be invoked by the OS-specific module to get the 334 * pointer to the RxD which points to the current queue put 335 * position. 336 * 337 * return pointer to the current RxD 338 * 339 * END_MANUAL_ENTRY 340 */ 341#define HWM_GET_CURR_RXD(smc) (struct s_smt_fp_rxd volatile *)\ 342 (smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put 343 344/* 345 * BEGIN_MANUAL_ENTRY(HWM_RX_CHECK) 346 * void HWM_RX_CHECK(smc,low_water) 347 * 348 * function MACRO (hardware module, hwmtm.h) 349 * This macro is invoked by the OS-specific before it left the 350 * function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd 351 * if the number of used RxDs is equal or lower than the 352 * the given low water mark. 353 * 354 * para low_water low water mark of used RxD's 355 * 356 * END_MANUAL_ENTRY 357 */ 358#ifndef HWM_NO_FLOW_CTL 359#define HWM_RX_CHECK(smc,low_water) {\ 360 if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\ 361 mac_drv_fill_rxd(smc) ;\ 362 }\ 363} 364#else 365#define HWM_RX_CHECK(smc,low_water) mac_drv_fill_rxd(smc) 366#endif 367 368#ifndef HWM_EBASE 369#define HWM_EBASE 500 370#endif 371 372#define HWM_E0001 HWM_EBASE + 1 373#define HWM_E0001_MSG "HWM: Wrong size of s_rxd_os struct" 374#define HWM_E0002 HWM_EBASE + 2 375#define HWM_E0002_MSG "HWM: Wrong size of s_txd_os struct" 376#define HWM_E0003 HWM_EBASE + 3 377#define HWM_E0003_MSG "HWM: smt_free_mbuf() called with NULL pointer" 378#define HWM_E0004 HWM_EBASE + 4 379#define HWM_E0004_MSG "HWM: Parity error rx queue 1" 380#define HWM_E0005 HWM_EBASE + 5 381#define HWM_E0005_MSG "HWM: Encoding error rx queue 1" 382#define HWM_E0006 HWM_EBASE + 6 383#define HWM_E0006_MSG "HWM: Encoding error async tx queue" 384#define HWM_E0007 HWM_EBASE + 7 385#define HWM_E0007_MSG "HWM: Encoding error sync tx queue" 386#define HWM_E0008 HWM_EBASE + 8 387#define HWM_E0008_MSG "" 388#define HWM_E0009 HWM_EBASE + 9 389#define HWM_E0009_MSG "HWM: Out of RxD condition detected" 390#define HWM_E0010 HWM_EBASE + 10 391#define HWM_E0010_MSG "HWM: A protocol layer has tried to send a frame with an invalid frame control" 392#define HWM_E0011 HWM_EBASE + 11 393#define HWM_E0011_MSG "HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped" 394#define HWM_E0012 HWM_EBASE + 12 395#define HWM_E0012_MSG "HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped" 396#define HWM_E0013 HWM_EBASE + 13 397#define HWM_E0013_MSG "HWM: mac_drv_repair_descr was called although the hardware wasn't stopped" 398 399#endif 400