1/*====================================================================== 2 fmvj18x_cs.c 2.8 2002/03/23 3 4 A fmvj18x (and its compatibles) PCMCIA client driver 5 6 Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp 7 8 TDK LAK-CD021 and CONTEC C-NET(PC)C support added by 9 Nobuhiro Katayama, kata-n@po.iijnet.or.jp 10 11 The PCMCIA client code is based on code written by David Hinds. 12 Network code is based on the "FMV-18x driver" by Yutaka TAMIYA 13 but is actually largely Donald Becker's AT1700 driver, which 14 carries the following attribution: 15 16 Written 1993-94 by Donald Becker. 17 18 Copyright 1993 United States Government as represented by the 19 Director, National Security Agency. 20 21 This software may be used and distributed according to the terms 22 of the GNU General Public License, incorporated herein by reference. 23 24 The author may be reached as becker@scyld.com, or C/O 25 Scyld Computing Corporation 26 410 Severn Ave., Suite 210 27 Annapolis MD 21403 28 29======================================================================*/ 30 31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 32 33#define DRV_NAME "fmvj18x_cs" 34#define DRV_VERSION "2.9" 35 36#include <linux/module.h> 37#include <linux/kernel.h> 38#include <linux/ptrace.h> 39#include <linux/slab.h> 40#include <linux/string.h> 41#include <linux/timer.h> 42#include <linux/interrupt.h> 43#include <linux/in.h> 44#include <linux/delay.h> 45#include <linux/ethtool.h> 46#include <linux/netdevice.h> 47#include <linux/etherdevice.h> 48#include <linux/skbuff.h> 49#include <linux/if_arp.h> 50#include <linux/ioport.h> 51#include <linux/crc32.h> 52 53#include <pcmcia/cistpl.h> 54#include <pcmcia/ciscode.h> 55#include <pcmcia/ds.h> 56 57#include <asm/uaccess.h> 58#include <asm/io.h> 59 60/*====================================================================*/ 61 62/* Module parameters */ 63 64MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver"); 65MODULE_LICENSE("GPL"); 66 67#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 68 69/* SRAM configuration */ 70/* 0:4KB*2 TX buffer else:8KB*2 TX buffer */ 71INT_MODULE_PARM(sram_config, 0); 72 73 74/*====================================================================*/ 75/* 76 PCMCIA event handlers 77 */ 78static int fmvj18x_config(struct pcmcia_device *link); 79static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id); 80static int fmvj18x_setup_mfc(struct pcmcia_device *link); 81static void fmvj18x_release(struct pcmcia_device *link); 82static void fmvj18x_detach(struct pcmcia_device *p_dev); 83 84/* 85 LAN controller(MBH86960A) specific routines 86 */ 87static int fjn_config(struct net_device *dev, struct ifmap *map); 88static int fjn_open(struct net_device *dev); 89static int fjn_close(struct net_device *dev); 90static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, 91 struct net_device *dev); 92static irqreturn_t fjn_interrupt(int irq, void *dev_id); 93static void fjn_rx(struct net_device *dev); 94static void fjn_reset(struct net_device *dev); 95static void set_rx_mode(struct net_device *dev); 96static void fjn_tx_timeout(struct net_device *dev); 97static const struct ethtool_ops netdev_ethtool_ops; 98 99/* 100 card type 101 */ 102enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN, 103 XXX10304, NEC, KME 104}; 105 106/* 107 driver specific data structure 108*/ 109struct local_info { 110 struct pcmcia_device *p_dev; 111 long open_time; 112 uint tx_started:1; 113 uint tx_queue; 114 u_short tx_queue_len; 115 enum cardtype cardtype; 116 u_short sent; 117 u_char __iomem *base; 118}; 119 120#define MC_FILTERBREAK 64 121 122/*====================================================================*/ 123/* 124 ioport offset from the base address 125 */ 126#define TX_STATUS 0 /* transmit status register */ 127#define RX_STATUS 1 /* receive status register */ 128#define TX_INTR 2 /* transmit interrupt mask register */ 129#define RX_INTR 3 /* receive interrupt mask register */ 130#define TX_MODE 4 /* transmit mode register */ 131#define RX_MODE 5 /* receive mode register */ 132#define CONFIG_0 6 /* configuration register 0 */ 133#define CONFIG_1 7 /* configuration register 1 */ 134 135#define NODE_ID 8 /* node ID register (bank 0) */ 136#define MAR_ADR 8 /* multicast address registers (bank 1) */ 137 138#define DATAPORT 8 /* buffer mem port registers (bank 2) */ 139#define TX_START 10 /* transmit start register */ 140#define COL_CTRL 11 /* 16 collision control register */ 141#define BMPR12 12 /* reserved */ 142#define BMPR13 13 /* reserved */ 143#define RX_SKIP 14 /* skip received packet register */ 144 145#define LAN_CTRL 16 /* LAN card control register */ 146 147#define MAC_ID 0x1a /* hardware address */ 148#define UNGERMANN_MAC_ID 0x18 /* UNGERMANN-BASS hardware address */ 149 150/* 151 control bits 152 */ 153#define ENA_TMT_OK 0x80 154#define ENA_TMT_REC 0x20 155#define ENA_COL 0x04 156#define ENA_16_COL 0x02 157#define ENA_TBUS_ERR 0x01 158 159#define ENA_PKT_RDY 0x80 160#define ENA_BUS_ERR 0x40 161#define ENA_LEN_ERR 0x08 162#define ENA_ALG_ERR 0x04 163#define ENA_CRC_ERR 0x02 164#define ENA_OVR_FLO 0x01 165 166/* flags */ 167#define F_TMT_RDY 0x80 /* can accept new packet */ 168#define F_NET_BSY 0x40 /* carrier is detected */ 169#define F_TMT_OK 0x20 /* send packet successfully */ 170#define F_SRT_PKT 0x10 /* short packet error */ 171#define F_COL_ERR 0x04 /* collision error */ 172#define F_16_COL 0x02 /* 16 collision error */ 173#define F_TBUS_ERR 0x01 /* bus read error */ 174 175#define F_PKT_RDY 0x80 /* packet(s) in buffer */ 176#define F_BUS_ERR 0x40 /* bus read error */ 177#define F_LEN_ERR 0x08 /* short packet */ 178#define F_ALG_ERR 0x04 /* frame error */ 179#define F_CRC_ERR 0x02 /* CRC error */ 180#define F_OVR_FLO 0x01 /* overflow error */ 181 182#define F_BUF_EMP 0x40 /* receive buffer is empty */ 183 184#define F_SKP_PKT 0x05 /* drop packet in buffer */ 185 186/* default bitmaps */ 187#define D_TX_INTR ( ENA_TMT_OK ) 188#define D_RX_INTR ( ENA_PKT_RDY | ENA_LEN_ERR \ 189 | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO ) 190#define TX_STAT_M ( F_TMT_RDY ) 191#define RX_STAT_M ( F_PKT_RDY | F_LEN_ERR \ 192 | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO ) 193 194/* commands */ 195#define D_TX_MODE 0x06 /* no tests, detect carrier */ 196#define ID_MATCHED 0x02 /* (RX_MODE) */ 197#define RECV_ALL 0x03 /* (RX_MODE) */ 198#define CONFIG0_DFL 0x5a /* 16bit bus, 4K x 2 Tx queues */ 199#define CONFIG0_DFL_1 0x5e /* 16bit bus, 8K x 2 Tx queues */ 200#define CONFIG0_RST 0xda /* Data Link Controller off (CONFIG_0) */ 201#define CONFIG0_RST_1 0xde /* Data Link Controller off (CONFIG_0) */ 202#define BANK_0 0xa0 /* bank 0 (CONFIG_1) */ 203#define BANK_1 0xa4 /* bank 1 (CONFIG_1) */ 204#define BANK_2 0xa8 /* bank 2 (CONFIG_1) */ 205#define CHIP_OFF 0x80 /* contrl chip power off (CONFIG_1) */ 206#define DO_TX 0x80 /* do transmit packet */ 207#define SEND_PKT 0x81 /* send a packet */ 208#define AUTO_MODE 0x07 /* Auto skip packet on 16 col detected */ 209#define MANU_MODE 0x03 /* Stop and skip packet on 16 col */ 210#define TDK_AUTO_MODE 0x47 /* Auto skip packet on 16 col detected */ 211#define TDK_MANU_MODE 0x43 /* Stop and skip packet on 16 col */ 212#define INTR_OFF 0x0d /* LAN controller ignores interrupts */ 213#define INTR_ON 0x1d /* LAN controller will catch interrupts */ 214 215#define TX_TIMEOUT ((400*HZ)/1000) 216 217#define BANK_0U 0x20 /* bank 0 (CONFIG_1) */ 218#define BANK_1U 0x24 /* bank 1 (CONFIG_1) */ 219#define BANK_2U 0x28 /* bank 2 (CONFIG_1) */ 220 221static const struct net_device_ops fjn_netdev_ops = { 222 .ndo_open = fjn_open, 223 .ndo_stop = fjn_close, 224 .ndo_start_xmit = fjn_start_xmit, 225 .ndo_tx_timeout = fjn_tx_timeout, 226 .ndo_set_config = fjn_config, 227 .ndo_set_rx_mode = set_rx_mode, 228 .ndo_change_mtu = eth_change_mtu, 229 .ndo_set_mac_address = eth_mac_addr, 230 .ndo_validate_addr = eth_validate_addr, 231}; 232 233static int fmvj18x_probe(struct pcmcia_device *link) 234{ 235 struct local_info *lp; 236 struct net_device *dev; 237 238 dev_dbg(&link->dev, "fmvj18x_attach()\n"); 239 240 /* Make up a FMVJ18x specific data structure */ 241 dev = alloc_etherdev(sizeof(struct local_info)); 242 if (!dev) 243 return -ENOMEM; 244 lp = netdev_priv(dev); 245 link->priv = dev; 246 lp->p_dev = link; 247 lp->base = NULL; 248 249 /* The io structure describes IO port mapping */ 250 link->resource[0]->end = 32; 251 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 252 253 /* General socket configuration */ 254 link->config_flags |= CONF_ENABLE_IRQ; 255 256 dev->netdev_ops = &fjn_netdev_ops; 257 dev->watchdog_timeo = TX_TIMEOUT; 258 259 dev->ethtool_ops = &netdev_ethtool_ops; 260 261 return fmvj18x_config(link); 262} /* fmvj18x_attach */ 263 264/*====================================================================*/ 265 266static void fmvj18x_detach(struct pcmcia_device *link) 267{ 268 struct net_device *dev = link->priv; 269 270 dev_dbg(&link->dev, "fmvj18x_detach\n"); 271 272 unregister_netdev(dev); 273 274 fmvj18x_release(link); 275 276 free_netdev(dev); 277} /* fmvj18x_detach */ 278 279/*====================================================================*/ 280 281static int mfc_try_io_port(struct pcmcia_device *link) 282{ 283 int i, ret; 284 static const unsigned int serial_base[5] = 285 { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; 286 287 for (i = 0; i < 5; i++) { 288 link->resource[1]->start = serial_base[i]; 289 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 290 if (link->resource[1]->start == 0) { 291 link->resource[1]->end = 0; 292 pr_notice("out of resource for serial\n"); 293 } 294 ret = pcmcia_request_io(link); 295 if (ret == 0) 296 return ret; 297 } 298 return ret; 299} 300 301static int ungermann_try_io_port(struct pcmcia_device *link) 302{ 303 int ret; 304 unsigned int ioaddr; 305 /* 306 Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360 307 0x380,0x3c0 only for ioport. 308 */ 309 for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { 310 link->resource[0]->start = ioaddr; 311 ret = pcmcia_request_io(link); 312 if (ret == 0) { 313 /* calculate ConfigIndex value */ 314 link->config_index = 315 ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; 316 return ret; 317 } 318 } 319 return ret; /* RequestIO failed */ 320} 321 322static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) 323{ 324 return 0; /* strange, but that's what the code did already before... */ 325} 326 327static int fmvj18x_config(struct pcmcia_device *link) 328{ 329 struct net_device *dev = link->priv; 330 struct local_info *lp = netdev_priv(dev); 331 int i, ret; 332 unsigned int ioaddr; 333 enum cardtype cardtype; 334 char *card_name = "unknown"; 335 u8 *buf; 336 size_t len; 337 u_char buggybuf[32]; 338 339 dev_dbg(&link->dev, "fmvj18x_config\n"); 340 341 link->io_lines = 5; 342 343 len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); 344 kfree(buf); 345 346 if (len) { 347 /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ 348 ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL); 349 if (ret != 0) 350 goto failed; 351 352 switch (link->manf_id) { 353 case MANFID_TDK: 354 cardtype = TDK; 355 if (link->card_id == PRODID_TDK_GN3410 || 356 link->card_id == PRODID_TDK_NP9610 || 357 link->card_id == PRODID_TDK_MN3200) { 358 /* MultiFunction Card */ 359 link->config_base = 0x800; 360 link->config_index = 0x47; 361 link->resource[1]->end = 8; 362 } 363 break; 364 case MANFID_NEC: 365 cardtype = NEC; /* MultiFunction Card */ 366 link->config_base = 0x800; 367 link->config_index = 0x47; 368 link->resource[1]->end = 8; 369 break; 370 case MANFID_KME: 371 cardtype = KME; /* MultiFunction Card */ 372 link->config_base = 0x800; 373 link->config_index = 0x47; 374 link->resource[1]->end = 8; 375 break; 376 case MANFID_CONTEC: 377 cardtype = CONTEC; 378 break; 379 case MANFID_FUJITSU: 380 if (link->config_base == 0x0fe0) 381 cardtype = MBH10302; 382 else if (link->card_id == PRODID_FUJITSU_MBH10302) 383 /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), 384 but these are MBH10304 based card. */ 385 cardtype = MBH10304; 386 else if (link->card_id == PRODID_FUJITSU_MBH10304) 387 cardtype = MBH10304; 388 else 389 cardtype = LA501; 390 break; 391 default: 392 cardtype = MBH10304; 393 } 394 } else { 395 /* old type card */ 396 switch (link->manf_id) { 397 case MANFID_FUJITSU: 398 if (link->card_id == PRODID_FUJITSU_MBH10304) { 399 cardtype = XXX10304; /* MBH10304 with buggy CIS */ 400 link->config_index = 0x20; 401 } else { 402 cardtype = MBH10302; /* NextCom NC5310, etc. */ 403 link->config_index = 1; 404 } 405 break; 406 case MANFID_UNGERMANN: 407 cardtype = UNGERMANN; 408 break; 409 default: 410 cardtype = MBH10302; 411 link->config_index = 1; 412 } 413 } 414 415 if (link->resource[1]->end != 0) { 416 ret = mfc_try_io_port(link); 417 if (ret != 0) goto failed; 418 } else if (cardtype == UNGERMANN) { 419 ret = ungermann_try_io_port(link); 420 if (ret != 0) goto failed; 421 } else { 422 ret = pcmcia_request_io(link); 423 if (ret) 424 goto failed; 425 } 426 ret = pcmcia_request_irq(link, fjn_interrupt); 427 if (ret) 428 goto failed; 429 ret = pcmcia_enable_device(link); 430 if (ret) 431 goto failed; 432 433 dev->irq = link->irq; 434 dev->base_addr = link->resource[0]->start; 435 436 if (resource_size(link->resource[1]) != 0) { 437 ret = fmvj18x_setup_mfc(link); 438 if (ret != 0) goto failed; 439 } 440 441 ioaddr = dev->base_addr; 442 443 /* Reset controller */ 444 if (sram_config == 0) 445 outb(CONFIG0_RST, ioaddr + CONFIG_0); 446 else 447 outb(CONFIG0_RST_1, ioaddr + CONFIG_0); 448 449 /* Power On chip and select bank 0 */ 450 if (cardtype == MBH10302) 451 outb(BANK_0, ioaddr + CONFIG_1); 452 else 453 outb(BANK_0U, ioaddr + CONFIG_1); 454 455 /* Set hardware address */ 456 switch (cardtype) { 457 case MBH10304: 458 case TDK: 459 case LA501: 460 case CONTEC: 461 case NEC: 462 case KME: 463 if (cardtype == MBH10304) { 464 card_name = "FMV-J182"; 465 466 len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); 467 if (len < 11) { 468 kfree(buf); 469 goto failed; 470 } 471 /* Read MACID from CIS */ 472 for (i = 5; i < 11; i++) 473 dev->dev_addr[i] = buf[i]; 474 kfree(buf); 475 } else { 476 if (pcmcia_get_mac_from_cis(link, dev)) 477 goto failed; 478 if( cardtype == TDK ) { 479 card_name = "TDK LAK-CD021"; 480 } else if( cardtype == LA501 ) { 481 card_name = "LA501"; 482 } else if( cardtype == NEC ) { 483 card_name = "PK-UG-J001"; 484 } else if( cardtype == KME ) { 485 card_name = "Panasonic"; 486 } else { 487 card_name = "C-NET(PC)C"; 488 } 489 } 490 break; 491 case UNGERMANN: 492 /* Read MACID from register */ 493 for (i = 0; i < 6; i++) 494 dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i); 495 card_name = "Access/CARD"; 496 break; 497 case XXX10304: 498 /* Read MACID from Buggy CIS */ 499 if (fmvj18x_get_hwinfo(link, buggybuf) == -1) { 500 pr_notice("unable to read hardware net address\n"); 501 goto failed; 502 } 503 for (i = 0 ; i < 6; i++) { 504 dev->dev_addr[i] = buggybuf[i]; 505 } 506 card_name = "FMV-J182"; 507 break; 508 case MBH10302: 509 default: 510 /* Read MACID from register */ 511 for (i = 0; i < 6; i++) 512 dev->dev_addr[i] = inb(ioaddr + MAC_ID + i); 513 card_name = "FMV-J181"; 514 break; 515 } 516 517 lp->cardtype = cardtype; 518 SET_NETDEV_DEV(dev, &link->dev); 519 520 if (register_netdev(dev) != 0) { 521 pr_notice("register_netdev() failed\n"); 522 goto failed; 523 } 524 525 /* print current configuration */ 526 netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n", 527 card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", 528 dev->base_addr, dev->irq, dev->dev_addr); 529 530 return 0; 531 532failed: 533 fmvj18x_release(link); 534 return -ENODEV; 535} /* fmvj18x_config */ 536/*====================================================================*/ 537 538static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) 539{ 540 u_char __iomem *base; 541 int i, j; 542 543 /* Allocate a small memory window */ 544 link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 545 link->resource[2]->start = 0; link->resource[2]->end = 0; 546 i = pcmcia_request_window(link, link->resource[2], 0); 547 if (i != 0) 548 return -1; 549 550 base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); 551 pcmcia_map_mem_page(link, link->resource[2], 0); 552 553 /* 554 * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format 555 * 22 0d xx xx xx 04 06 yy yy yy yy yy yy ff 556 * 'xx' is garbage. 557 * 'yy' is MAC address. 558 */ 559 for (i = 0; i < 0x200; i++) { 560 if (readb(base+i*2) == 0x22) { 561 if (readb(base+(i-1)*2) == 0xff && 562 readb(base+(i+5)*2) == 0x04 && 563 readb(base+(i+6)*2) == 0x06 && 564 readb(base+(i+13)*2) == 0xff) 565 break; 566 } 567 } 568 569 if (i != 0x200) { 570 for (j = 0 ; j < 6; j++,i++) { 571 node_id[j] = readb(base+(i+7)*2); 572 } 573 } 574 575 iounmap(base); 576 j = pcmcia_release_window(link, link->resource[2]); 577 return (i != 0x200) ? 0 : -1; 578 579} /* fmvj18x_get_hwinfo */ 580/*====================================================================*/ 581 582static int fmvj18x_setup_mfc(struct pcmcia_device *link) 583{ 584 int i; 585 struct net_device *dev = link->priv; 586 unsigned int ioaddr; 587 struct local_info *lp = netdev_priv(dev); 588 589 /* Allocate a small memory window */ 590 link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 591 link->resource[3]->start = link->resource[3]->end = 0; 592 i = pcmcia_request_window(link, link->resource[3], 0); 593 if (i != 0) 594 return -1; 595 596 lp->base = ioremap(link->resource[3]->start, 597 resource_size(link->resource[3])); 598 if (lp->base == NULL) { 599 netdev_notice(dev, "ioremap failed\n"); 600 return -1; 601 } 602 603 i = pcmcia_map_mem_page(link, link->resource[3], 0); 604 if (i != 0) { 605 iounmap(lp->base); 606 lp->base = NULL; 607 return -1; 608 } 609 610 ioaddr = dev->base_addr; 611 writeb(0x47, lp->base+0x800); /* Config Option Register of LAN */ 612 writeb(0x0, lp->base+0x802); /* Config and Status Register */ 613 614 writeb(ioaddr & 0xff, lp->base+0x80a); /* I/O Base(Low) of LAN */ 615 writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */ 616 617 writeb(0x45, lp->base+0x820); /* Config Option Register of Modem */ 618 writeb(0x8, lp->base+0x822); /* Config and Status Register */ 619 620 return 0; 621 622} 623/*====================================================================*/ 624 625static void fmvj18x_release(struct pcmcia_device *link) 626{ 627 628 struct net_device *dev = link->priv; 629 struct local_info *lp = netdev_priv(dev); 630 u_char __iomem *tmp; 631 632 dev_dbg(&link->dev, "fmvj18x_release\n"); 633 634 if (lp->base != NULL) { 635 tmp = lp->base; 636 lp->base = NULL; /* set NULL before iounmap */ 637 iounmap(tmp); 638 } 639 640 pcmcia_disable_device(link); 641 642} 643 644static int fmvj18x_suspend(struct pcmcia_device *link) 645{ 646 struct net_device *dev = link->priv; 647 648 if (link->open) 649 netif_device_detach(dev); 650 651 return 0; 652} 653 654static int fmvj18x_resume(struct pcmcia_device *link) 655{ 656 struct net_device *dev = link->priv; 657 658 if (link->open) { 659 fjn_reset(dev); 660 netif_device_attach(dev); 661 } 662 663 return 0; 664} 665 666/*====================================================================*/ 667 668static const struct pcmcia_device_id fmvj18x_ids[] = { 669 PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004), 670 PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59), 671 PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922), 672 PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922), 673 PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db), 674 PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e), 675 PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2), 676 PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4), 677 PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0 ", 0x8cef4d3a, 0x075fc7b6), 678 PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0 ", 0x8cef4d3a, 0xbccf43e6), 679 PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666), 680 PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70), 681 PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a), 682 PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2), 683 PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304 ES", 0x2599f454), 684 PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da), 685 PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080), 686 PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), 687 PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), 688 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a), 689 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a), 690 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01), 691 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05), 692 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05), 693 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101), 694 PCMCIA_DEVICE_NULL, 695}; 696MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); 697 698static struct pcmcia_driver fmvj18x_cs_driver = { 699 .owner = THIS_MODULE, 700 .name = "fmvj18x_cs", 701 .probe = fmvj18x_probe, 702 .remove = fmvj18x_detach, 703 .id_table = fmvj18x_ids, 704 .suspend = fmvj18x_suspend, 705 .resume = fmvj18x_resume, 706}; 707module_pcmcia_driver(fmvj18x_cs_driver); 708 709/*====================================================================*/ 710 711static irqreturn_t fjn_interrupt(int dummy, void *dev_id) 712{ 713 struct net_device *dev = dev_id; 714 struct local_info *lp = netdev_priv(dev); 715 unsigned int ioaddr; 716 unsigned short tx_stat, rx_stat; 717 718 ioaddr = dev->base_addr; 719 720 /* avoid multiple interrupts */ 721 outw(0x0000, ioaddr + TX_INTR); 722 723 /* wait for a while */ 724 udelay(1); 725 726 /* get status */ 727 tx_stat = inb(ioaddr + TX_STATUS); 728 rx_stat = inb(ioaddr + RX_STATUS); 729 730 /* clear status */ 731 outb(tx_stat, ioaddr + TX_STATUS); 732 outb(rx_stat, ioaddr + RX_STATUS); 733 734 pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat); 735 pr_debug(" tx_status %02x.\n", tx_stat); 736 737 if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { 738 /* there is packet(s) in rx buffer */ 739 fjn_rx(dev); 740 } 741 if (tx_stat & F_TMT_RDY) { 742 dev->stats.tx_packets += lp->sent ; 743 lp->sent = 0 ; 744 if (lp->tx_queue) { 745 outb(DO_TX | lp->tx_queue, ioaddr + TX_START); 746 lp->sent = lp->tx_queue ; 747 lp->tx_queue = 0; 748 lp->tx_queue_len = 0; 749 dev->trans_start = jiffies; 750 } else { 751 lp->tx_started = 0; 752 } 753 netif_wake_queue(dev); 754 } 755 pr_debug("%s: exiting interrupt,\n", dev->name); 756 pr_debug(" tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat); 757 758 outb(D_TX_INTR, ioaddr + TX_INTR); 759 outb(D_RX_INTR, ioaddr + RX_INTR); 760 761 if (lp->base != NULL) { 762 /* Ack interrupt for multifunction card */ 763 writeb(0x01, lp->base+0x802); 764 writeb(0x09, lp->base+0x822); 765 } 766 767 return IRQ_HANDLED; 768 769} /* fjn_interrupt */ 770 771/*====================================================================*/ 772 773static void fjn_tx_timeout(struct net_device *dev) 774{ 775 struct local_info *lp = netdev_priv(dev); 776 unsigned int ioaddr = dev->base_addr; 777 778 netdev_notice(dev, "transmit timed out with status %04x, %s?\n", 779 htons(inw(ioaddr + TX_STATUS)), 780 inb(ioaddr + TX_STATUS) & F_TMT_RDY 781 ? "IRQ conflict" : "network cable problem"); 782 netdev_notice(dev, "timeout registers: %04x %04x %04x " 783 "%04x %04x %04x %04x %04x.\n", 784 htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)), 785 htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)), 786 htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)), 787 htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14))); 788 dev->stats.tx_errors++; 789 /* ToDo: We should try to restart the adaptor... */ 790 local_irq_disable(); 791 fjn_reset(dev); 792 793 lp->tx_started = 0; 794 lp->tx_queue = 0; 795 lp->tx_queue_len = 0; 796 lp->sent = 0; 797 lp->open_time = jiffies; 798 local_irq_enable(); 799 netif_wake_queue(dev); 800} 801 802static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, 803 struct net_device *dev) 804{ 805 struct local_info *lp = netdev_priv(dev); 806 unsigned int ioaddr = dev->base_addr; 807 short length = skb->len; 808 809 if (length < ETH_ZLEN) 810 { 811 if (skb_padto(skb, ETH_ZLEN)) 812 return NETDEV_TX_OK; 813 length = ETH_ZLEN; 814 } 815 816 netif_stop_queue(dev); 817 818 { 819 unsigned char *buf = skb->data; 820 821 if (length > ETH_FRAME_LEN) { 822 netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n", 823 length); 824 return NETDEV_TX_BUSY; 825 } 826 827 netdev_dbg(dev, "Transmitting a packet of length %lu\n", 828 (unsigned long)skb->len); 829 dev->stats.tx_bytes += skb->len; 830 831 /* Disable both interrupts. */ 832 outw(0x0000, ioaddr + TX_INTR); 833 834 /* wait for a while */ 835 udelay(1); 836 837 outw(length, ioaddr + DATAPORT); 838 outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); 839 840 lp->tx_queue++; 841 lp->tx_queue_len += ((length+3) & ~1); 842 843 if (lp->tx_started == 0) { 844 /* If the Tx is idle, always trigger a transmit. */ 845 outb(DO_TX | lp->tx_queue, ioaddr + TX_START); 846 lp->sent = lp->tx_queue ; 847 lp->tx_queue = 0; 848 lp->tx_queue_len = 0; 849 lp->tx_started = 1; 850 netif_start_queue(dev); 851 } else { 852 if( sram_config == 0 ) { 853 if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) ) 854 /* Yes, there is room for one more packet. */ 855 netif_start_queue(dev); 856 } else { 857 if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && 858 lp->tx_queue < 127 ) 859 /* Yes, there is room for one more packet. */ 860 netif_start_queue(dev); 861 } 862 } 863 864 /* Re-enable interrupts */ 865 outb(D_TX_INTR, ioaddr + TX_INTR); 866 outb(D_RX_INTR, ioaddr + RX_INTR); 867 } 868 dev_kfree_skb (skb); 869 870 return NETDEV_TX_OK; 871} /* fjn_start_xmit */ 872 873/*====================================================================*/ 874 875static void fjn_reset(struct net_device *dev) 876{ 877 struct local_info *lp = netdev_priv(dev); 878 unsigned int ioaddr = dev->base_addr; 879 int i; 880 881 netdev_dbg(dev, "fjn_reset() called\n"); 882 883 /* Reset controller */ 884 if( sram_config == 0 ) 885 outb(CONFIG0_RST, ioaddr + CONFIG_0); 886 else 887 outb(CONFIG0_RST_1, ioaddr + CONFIG_0); 888 889 /* Power On chip and select bank 0 */ 890 if (lp->cardtype == MBH10302) 891 outb(BANK_0, ioaddr + CONFIG_1); 892 else 893 outb(BANK_0U, ioaddr + CONFIG_1); 894 895 /* Set Tx modes */ 896 outb(D_TX_MODE, ioaddr + TX_MODE); 897 /* set Rx modes */ 898 outb(ID_MATCHED, ioaddr + RX_MODE); 899 900 /* Set hardware address */ 901 for (i = 0; i < 6; i++) 902 outb(dev->dev_addr[i], ioaddr + NODE_ID + i); 903 904 /* (re)initialize the multicast table */ 905 set_rx_mode(dev); 906 907 /* Switch to bank 2 (runtime mode) */ 908 if (lp->cardtype == MBH10302) 909 outb(BANK_2, ioaddr + CONFIG_1); 910 else 911 outb(BANK_2U, ioaddr + CONFIG_1); 912 913 /* set 16col ctrl bits */ 914 if( lp->cardtype == TDK || lp->cardtype == CONTEC) 915 outb(TDK_AUTO_MODE, ioaddr + COL_CTRL); 916 else 917 outb(AUTO_MODE, ioaddr + COL_CTRL); 918 919 /* clear Reserved Regs */ 920 outb(0x00, ioaddr + BMPR12); 921 outb(0x00, ioaddr + BMPR13); 922 923 /* reset Skip packet reg. */ 924 outb(0x01, ioaddr + RX_SKIP); 925 926 /* Enable Tx and Rx */ 927 if( sram_config == 0 ) 928 outb(CONFIG0_DFL, ioaddr + CONFIG_0); 929 else 930 outb(CONFIG0_DFL_1, ioaddr + CONFIG_0); 931 932 /* Init receive pointer ? */ 933 inw(ioaddr + DATAPORT); 934 inw(ioaddr + DATAPORT); 935 936 /* Clear all status */ 937 outb(0xff, ioaddr + TX_STATUS); 938 outb(0xff, ioaddr + RX_STATUS); 939 940 if (lp->cardtype == MBH10302) 941 outb(INTR_OFF, ioaddr + LAN_CTRL); 942 943 /* Turn on Rx interrupts */ 944 outb(D_TX_INTR, ioaddr + TX_INTR); 945 outb(D_RX_INTR, ioaddr + RX_INTR); 946 947 /* Turn on interrupts from LAN card controller */ 948 if (lp->cardtype == MBH10302) 949 outb(INTR_ON, ioaddr + LAN_CTRL); 950} /* fjn_reset */ 951 952/*====================================================================*/ 953 954static void fjn_rx(struct net_device *dev) 955{ 956 unsigned int ioaddr = dev->base_addr; 957 int boguscount = 10; /* 5 -> 10: by agy 19940922 */ 958 959 pr_debug("%s: in rx_packet(), rx_status %02x.\n", 960 dev->name, inb(ioaddr + RX_STATUS)); 961 962 while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { 963 u_short status = inw(ioaddr + DATAPORT); 964 965 netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n", 966 inb(ioaddr + RX_MODE), status); 967#ifndef final_version 968 if (status == 0) { 969 outb(F_SKP_PKT, ioaddr + RX_SKIP); 970 break; 971 } 972#endif 973 if ((status & 0xF0) != 0x20) { /* There was an error. */ 974 dev->stats.rx_errors++; 975 if (status & F_LEN_ERR) dev->stats.rx_length_errors++; 976 if (status & F_ALG_ERR) dev->stats.rx_frame_errors++; 977 if (status & F_CRC_ERR) dev->stats.rx_crc_errors++; 978 if (status & F_OVR_FLO) dev->stats.rx_over_errors++; 979 } else { 980 u_short pkt_len = inw(ioaddr + DATAPORT); 981 /* Malloc up new buffer. */ 982 struct sk_buff *skb; 983 984 if (pkt_len > 1550) { 985 netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n", 986 pkt_len); 987 outb(F_SKP_PKT, ioaddr + RX_SKIP); 988 dev->stats.rx_errors++; 989 break; 990 } 991 skb = netdev_alloc_skb(dev, pkt_len + 2); 992 if (skb == NULL) { 993 outb(F_SKP_PKT, ioaddr + RX_SKIP); 994 dev->stats.rx_dropped++; 995 break; 996 } 997 998 skb_reserve(skb, 2); 999 insw(ioaddr + DATAPORT, skb_put(skb, pkt_len), 1000 (pkt_len + 1) >> 1); 1001 skb->protocol = eth_type_trans(skb, dev); 1002 1003 { 1004 int i; 1005 pr_debug("%s: Rxed packet of length %d: ", 1006 dev->name, pkt_len); 1007 for (i = 0; i < 14; i++) 1008 pr_debug(" %02x", skb->data[i]); 1009 pr_debug(".\n"); 1010 } 1011 1012 netif_rx(skb); 1013 dev->stats.rx_packets++; 1014 dev->stats.rx_bytes += pkt_len; 1015 } 1016 if (--boguscount <= 0) 1017 break; 1018 } 1019 1020 /* If any worth-while packets have been received, dev_rint() 1021 has done a netif_wake_queue() for us and will work on them 1022 when we get to the bottom-half routine. */ 1023/* 1024 if (lp->cardtype != TDK) { 1025 int i; 1026 for (i = 0; i < 20; i++) { 1027 if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP) 1028 break; 1029 (void)inw(ioaddr + DATAPORT); /+ dummy status read +/ 1030 outb(F_SKP_PKT, ioaddr + RX_SKIP); 1031 } 1032 1033 if (i > 0) 1034 pr_debug("%s: Exint Rx packet with mode %02x after " 1035 "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i); 1036 } 1037*/ 1038} /* fjn_rx */ 1039 1040/*====================================================================*/ 1041 1042static void netdev_get_drvinfo(struct net_device *dev, 1043 struct ethtool_drvinfo *info) 1044{ 1045 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1046 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1047 snprintf(info->bus_info, sizeof(info->bus_info), 1048 "PCMCIA 0x%lx", dev->base_addr); 1049} 1050 1051static const struct ethtool_ops netdev_ethtool_ops = { 1052 .get_drvinfo = netdev_get_drvinfo, 1053}; 1054 1055static int fjn_config(struct net_device *dev, struct ifmap *map){ 1056 return 0; 1057} 1058 1059static int fjn_open(struct net_device *dev) 1060{ 1061 struct local_info *lp = netdev_priv(dev); 1062 struct pcmcia_device *link = lp->p_dev; 1063 1064 pr_debug("fjn_open('%s').\n", dev->name); 1065 1066 if (!pcmcia_dev_present(link)) 1067 return -ENODEV; 1068 1069 link->open++; 1070 1071 fjn_reset(dev); 1072 1073 lp->tx_started = 0; 1074 lp->tx_queue = 0; 1075 lp->tx_queue_len = 0; 1076 lp->open_time = jiffies; 1077 netif_start_queue(dev); 1078 1079 return 0; 1080} /* fjn_open */ 1081 1082/*====================================================================*/ 1083 1084static int fjn_close(struct net_device *dev) 1085{ 1086 struct local_info *lp = netdev_priv(dev); 1087 struct pcmcia_device *link = lp->p_dev; 1088 unsigned int ioaddr = dev->base_addr; 1089 1090 pr_debug("fjn_close('%s').\n", dev->name); 1091 1092 lp->open_time = 0; 1093 netif_stop_queue(dev); 1094 1095 /* Set configuration register 0 to disable Tx and Rx. */ 1096 if( sram_config == 0 ) 1097 outb(CONFIG0_RST ,ioaddr + CONFIG_0); 1098 else 1099 outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0); 1100 1101 /* Update the statistics -- ToDo. */ 1102 1103 /* Power-down the chip. Green, green, green! */ 1104 outb(CHIP_OFF ,ioaddr + CONFIG_1); 1105 1106 /* Set the ethernet adaptor disable IRQ */ 1107 if (lp->cardtype == MBH10302) 1108 outb(INTR_OFF, ioaddr + LAN_CTRL); 1109 1110 link->open--; 1111 1112 return 0; 1113} /* fjn_close */ 1114 1115/*====================================================================*/ 1116 1117/* 1118 Set the multicast/promiscuous mode for this adaptor. 1119*/ 1120 1121static void set_rx_mode(struct net_device *dev) 1122{ 1123 unsigned int ioaddr = dev->base_addr; 1124 u_char mc_filter[8]; /* Multicast hash filter */ 1125 u_long flags; 1126 int i; 1127 1128 int saved_bank; 1129 int saved_config_0 = inb(ioaddr + CONFIG_0); 1130 1131 local_irq_save(flags); 1132 1133 /* Disable Tx and Rx */ 1134 if (sram_config == 0) 1135 outb(CONFIG0_RST, ioaddr + CONFIG_0); 1136 else 1137 outb(CONFIG0_RST_1, ioaddr + CONFIG_0); 1138 1139 if (dev->flags & IFF_PROMISC) { 1140 memset(mc_filter, 0xff, sizeof(mc_filter)); 1141 outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ 1142 } else if (netdev_mc_count(dev) > MC_FILTERBREAK || 1143 (dev->flags & IFF_ALLMULTI)) { 1144 /* Too many to filter perfectly -- accept all multicasts. */ 1145 memset(mc_filter, 0xff, sizeof(mc_filter)); 1146 outb(2, ioaddr + RX_MODE); /* Use normal mode. */ 1147 } else if (netdev_mc_empty(dev)) { 1148 memset(mc_filter, 0x00, sizeof(mc_filter)); 1149 outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */ 1150 } else { 1151 struct netdev_hw_addr *ha; 1152 1153 memset(mc_filter, 0, sizeof(mc_filter)); 1154 netdev_for_each_mc_addr(ha, dev) { 1155 unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26; 1156 mc_filter[bit >> 3] |= (1 << (bit & 7)); 1157 } 1158 outb(2, ioaddr + RX_MODE); /* Use normal mode. */ 1159 } 1160 1161 /* Switch to bank 1 and set the multicast table. */ 1162 saved_bank = inb(ioaddr + CONFIG_1); 1163 outb(0xe4, ioaddr + CONFIG_1); 1164 1165 for (i = 0; i < 8; i++) 1166 outb(mc_filter[i], ioaddr + MAR_ADR + i); 1167 outb(saved_bank, ioaddr + CONFIG_1); 1168 1169 outb(saved_config_0, ioaddr + CONFIG_0); 1170 1171 local_irq_restore(flags); 1172} 1173