1/* 2 * Linux network driver for QLogic BR-series Converged Network Adapter. 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms of the GNU General Public License (GPL) Version 2 as 6 * published by the Free Software Foundation 7 * 8 * This program is distributed in the hope that it will be useful, but 9 * WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 11 * General Public License for more details. 12 */ 13/* 14 * Copyright (c) 2005-2014 Brocade Communications Systems, Inc. 15 * Copyright (c) 2014-2015 QLogic Corporation 16 * All rights reserved 17 * www.qlogic.com 18 */ 19 20/* File for interrupt macros and functions */ 21 22#ifndef __BNA_HW_DEFS_H__ 23#define __BNA_HW_DEFS_H__ 24 25#include "bfi_reg.h" 26 27/* SW imposed limits */ 28 29#define BFI_ENET_DEF_TXQ 1 30#define BFI_ENET_DEF_RXP 1 31#define BFI_ENET_DEF_UCAM 1 32#define BFI_ENET_DEF_RITSZ 1 33 34#define BFI_ENET_MAX_MCAM 256 35 36#define BFI_INVALID_RID -1 37 38#define BFI_IBIDX_SIZE 4 39 40#define BFI_VLAN_WORD_SHIFT 5 /* 32 bits */ 41#define BFI_VLAN_WORD_MASK 0x1F 42#define BFI_VLAN_BLOCK_SHIFT 9 /* 512 bits */ 43#define BFI_VLAN_BMASK_ALL 0xFF 44 45#define BFI_COALESCING_TIMER_UNIT 5 /* 5us */ 46#define BFI_MAX_COALESCING_TIMEO 0xFF /* in 5us units */ 47#define BFI_MAX_INTERPKT_COUNT 0xFF 48#define BFI_MAX_INTERPKT_TIMEO 0xF /* in 0.5us units */ 49#define BFI_TX_COALESCING_TIMEO 20 /* 20 * 5 = 100us */ 50#define BFI_TX_INTERPKT_COUNT 12 /* Pkt Cnt = 12 */ 51#define BFI_TX_INTERPKT_TIMEO 15 /* 15 * 0.5 = 7.5us */ 52#define BFI_RX_COALESCING_TIMEO 12 /* 12 * 5 = 60us */ 53#define BFI_RX_INTERPKT_COUNT 6 /* Pkt Cnt = 6 */ 54#define BFI_RX_INTERPKT_TIMEO 3 /* 3 * 0.5 = 1.5us */ 55 56#define BFI_TXQ_WI_SIZE 64 /* bytes */ 57#define BFI_RXQ_WI_SIZE 8 /* bytes */ 58#define BFI_CQ_WI_SIZE 16 /* bytes */ 59#define BFI_TX_MAX_WRR_QUOTA 0xFFF 60 61#define BFI_TX_MAX_VECTORS_PER_WI 4 62#define BFI_TX_MAX_VECTORS_PER_PKT 0xFF 63#define BFI_TX_MAX_DATA_PER_VECTOR 0xFFFF 64#define BFI_TX_MAX_DATA_PER_PKT 0xFFFFFF 65 66/* Small Q buffer size */ 67#define BFI_SMALL_RXBUF_SIZE 128 68 69#define BFI_TX_MAX_PRIO 8 70#define BFI_TX_PRIO_MAP_ALL 0xFF 71 72/* 73 * 74 * Register definitions and macros 75 * 76 */ 77 78#define BNA_PCI_REG_CT_ADDRSZ (0x40000) 79 80#define ct_reg_addr_init(_bna, _pcidev) \ 81{ \ 82 struct bna_reg_offset reg_offset[] = \ 83 {{HOSTFN0_INT_STATUS, HOSTFN0_INT_MSK}, \ 84 {HOSTFN1_INT_STATUS, HOSTFN1_INT_MSK}, \ 85 {HOSTFN2_INT_STATUS, HOSTFN2_INT_MSK}, \ 86 {HOSTFN3_INT_STATUS, HOSTFN3_INT_MSK} }; \ 87 \ 88 (_bna)->regs.fn_int_status = (_pcidev)->pci_bar_kva + \ 89 reg_offset[(_pcidev)->pci_func].fn_int_status;\ 90 (_bna)->regs.fn_int_mask = (_pcidev)->pci_bar_kva + \ 91 reg_offset[(_pcidev)->pci_func].fn_int_mask;\ 92} 93 94#define ct_bit_defn_init(_bna, _pcidev) \ 95{ \ 96 (_bna)->bits.mbox_status_bits = (__HFN_INT_MBOX_LPU0 | \ 97 __HFN_INT_MBOX_LPU1); \ 98 (_bna)->bits.mbox_mask_bits = (__HFN_INT_MBOX_LPU0 | \ 99 __HFN_INT_MBOX_LPU1); \ 100 (_bna)->bits.error_status_bits = (__HFN_INT_ERR_MASK); \ 101 (_bna)->bits.error_mask_bits = (__HFN_INT_ERR_MASK); \ 102 (_bna)->bits.halt_status_bits = __HFN_INT_LL_HALT; \ 103 (_bna)->bits.halt_mask_bits = __HFN_INT_LL_HALT; \ 104} 105 106#define ct2_reg_addr_init(_bna, _pcidev) \ 107{ \ 108 (_bna)->regs.fn_int_status = (_pcidev)->pci_bar_kva + \ 109 CT2_HOSTFN_INT_STATUS; \ 110 (_bna)->regs.fn_int_mask = (_pcidev)->pci_bar_kva + \ 111 CT2_HOSTFN_INTR_MASK; \ 112} 113 114#define ct2_bit_defn_init(_bna, _pcidev) \ 115{ \ 116 (_bna)->bits.mbox_status_bits = (__HFN_INT_MBOX_LPU0_CT2 | \ 117 __HFN_INT_MBOX_LPU1_CT2); \ 118 (_bna)->bits.mbox_mask_bits = (__HFN_INT_MBOX_LPU0_CT2 | \ 119 __HFN_INT_MBOX_LPU1_CT2); \ 120 (_bna)->bits.error_status_bits = (__HFN_INT_ERR_MASK_CT2); \ 121 (_bna)->bits.error_mask_bits = (__HFN_INT_ERR_MASK_CT2); \ 122 (_bna)->bits.halt_status_bits = __HFN_INT_CPQ_HALT_CT2; \ 123 (_bna)->bits.halt_mask_bits = __HFN_INT_CPQ_HALT_CT2; \ 124} 125 126#define bna_reg_addr_init(_bna, _pcidev) \ 127{ \ 128 switch ((_pcidev)->device_id) { \ 129 case PCI_DEVICE_ID_BROCADE_CT: \ 130 ct_reg_addr_init((_bna), (_pcidev)); \ 131 ct_bit_defn_init((_bna), (_pcidev)); \ 132 break; \ 133 case BFA_PCI_DEVICE_ID_CT2: \ 134 ct2_reg_addr_init((_bna), (_pcidev)); \ 135 ct2_bit_defn_init((_bna), (_pcidev)); \ 136 break; \ 137 } \ 138} 139 140#define bna_port_id_get(_bna) ((_bna)->ioceth.ioc.port_id) 141 142/* Interrupt related bits, flags and macros */ 143 144#define IB_STATUS_BITS 0x0000ffff 145 146#define BNA_IS_MBOX_INTR(_bna, _intr_status) \ 147 ((_intr_status) & (_bna)->bits.mbox_status_bits) 148 149#define BNA_IS_HALT_INTR(_bna, _intr_status) \ 150 ((_intr_status) & (_bna)->bits.halt_status_bits) 151 152#define BNA_IS_ERR_INTR(_bna, _intr_status) \ 153 ((_intr_status) & (_bna)->bits.error_status_bits) 154 155#define BNA_IS_MBOX_ERR_INTR(_bna, _intr_status) \ 156 (BNA_IS_MBOX_INTR(_bna, _intr_status) | \ 157 BNA_IS_ERR_INTR(_bna, _intr_status)) 158 159#define BNA_IS_INTX_DATA_INTR(_intr_status) \ 160 ((_intr_status) & IB_STATUS_BITS) 161 162#define bna_halt_clear(_bna) \ 163do { \ 164 u32 init_halt; \ 165 init_halt = readl((_bna)->ioceth.ioc.ioc_regs.ll_halt); \ 166 init_halt &= ~__FW_INIT_HALT_P; \ 167 writel(init_halt, (_bna)->ioceth.ioc.ioc_regs.ll_halt); \ 168 init_halt = readl((_bna)->ioceth.ioc.ioc_regs.ll_halt); \ 169} while (0) 170 171#define bna_intx_disable(_bna, _cur_mask) \ 172{ \ 173 (_cur_mask) = readl((_bna)->regs.fn_int_mask); \ 174 writel(0xffffffff, (_bna)->regs.fn_int_mask); \ 175} 176 177#define bna_intx_enable(bna, new_mask) \ 178 writel((new_mask), (bna)->regs.fn_int_mask) 179#define bna_mbox_intr_disable(bna) \ 180do { \ 181 u32 mask; \ 182 mask = readl((bna)->regs.fn_int_mask); \ 183 writel((mask | (bna)->bits.mbox_mask_bits | \ 184 (bna)->bits.error_mask_bits), (bna)->regs.fn_int_mask); \ 185 mask = readl((bna)->regs.fn_int_mask); \ 186} while (0) 187 188#define bna_mbox_intr_enable(bna) \ 189do { \ 190 u32 mask; \ 191 mask = readl((bna)->regs.fn_int_mask); \ 192 writel((mask & ~((bna)->bits.mbox_mask_bits | \ 193 (bna)->bits.error_mask_bits)), (bna)->regs.fn_int_mask);\ 194 mask = readl((bna)->regs.fn_int_mask); \ 195} while (0) 196 197#define bna_intr_status_get(_bna, _status) \ 198{ \ 199 (_status) = readl((_bna)->regs.fn_int_status); \ 200 if (_status) { \ 201 writel(((_status) & ~(_bna)->bits.mbox_status_bits), \ 202 (_bna)->regs.fn_int_status); \ 203 } \ 204} 205 206/* 207 * MAX ACK EVENTS : No. of acks that can be accumulated in driver, 208 * before acking to h/w. The no. of bits is 16 in the doorbell register, 209 * however we keep this limited to 15 bits. 210 * This is because around the edge of 64K boundary (16 bits), one 211 * single poll can make the accumulated ACK counter cross the 64K boundary, 212 * causing problems, when we try to ack with a value greater than 64K. 213 * 15 bits (32K) should be large enough to accumulate, anyways, and the max. 214 * acked events to h/w can be (32K + max poll weight) (currently 64). 215 */ 216#define BNA_IB_MAX_ACK_EVENTS (1 << 15) 217 218/* These macros build the data portion of the TxQ/RxQ doorbell */ 219#define BNA_DOORBELL_Q_PRD_IDX(_pi) (0x80000000 | (_pi)) 220#define BNA_DOORBELL_Q_STOP (0x40000000) 221 222/* These macros build the data portion of the IB doorbell */ 223#define BNA_DOORBELL_IB_INT_ACK(_timeout, _events) \ 224 (0x80000000 | ((_timeout) << 16) | (_events)) 225#define BNA_DOORBELL_IB_INT_DISABLE (0x40000000) 226 227/* Set the coalescing timer for the given ib */ 228#define bna_ib_coalescing_timer_set(_i_dbell, _cls_timer) \ 229 ((_i_dbell)->doorbell_ack = BNA_DOORBELL_IB_INT_ACK((_cls_timer), 0)); 230 231/* Acks 'events' # of events for a given ib while disabling interrupts */ 232#define bna_ib_ack_disable_irq(_i_dbell, _events) \ 233 (writel(BNA_DOORBELL_IB_INT_ACK(0, (_events)), \ 234 (_i_dbell)->doorbell_addr)); 235 236/* Acks 'events' # of events for a given ib */ 237#define bna_ib_ack(_i_dbell, _events) \ 238 (writel(((_i_dbell)->doorbell_ack | (_events)), \ 239 (_i_dbell)->doorbell_addr)); 240 241#define bna_ib_start(_bna, _ib, _is_regular) \ 242{ \ 243 u32 intx_mask; \ 244 struct bna_ib *ib = _ib; \ 245 if ((ib->intr_type == BNA_INTR_T_INTX)) { \ 246 bna_intx_disable((_bna), intx_mask); \ 247 intx_mask &= ~(ib->intr_vector); \ 248 bna_intx_enable((_bna), intx_mask); \ 249 } \ 250 bna_ib_coalescing_timer_set(&ib->door_bell, \ 251 ib->coalescing_timeo); \ 252 if (_is_regular) \ 253 bna_ib_ack(&ib->door_bell, 0); \ 254} 255 256#define bna_ib_stop(_bna, _ib) \ 257{ \ 258 u32 intx_mask; \ 259 struct bna_ib *ib = _ib; \ 260 writel(BNA_DOORBELL_IB_INT_DISABLE, \ 261 ib->door_bell.doorbell_addr); \ 262 if (ib->intr_type == BNA_INTR_T_INTX) { \ 263 bna_intx_disable((_bna), intx_mask); \ 264 intx_mask |= ib->intr_vector; \ 265 bna_intx_enable((_bna), intx_mask); \ 266 } \ 267} 268 269#define bna_txq_prod_indx_doorbell(_tcb) \ 270 (writel(BNA_DOORBELL_Q_PRD_IDX((_tcb)->producer_index), \ 271 (_tcb)->q_dbell)); 272 273#define bna_rxq_prod_indx_doorbell(_rcb) \ 274 (writel(BNA_DOORBELL_Q_PRD_IDX((_rcb)->producer_index), \ 275 (_rcb)->q_dbell)); 276 277/* TxQ, RxQ, CQ related bits, offsets, macros */ 278 279/* TxQ Entry Opcodes */ 280#define BNA_TXQ_WI_SEND (0x402) /* Single Frame Transmission */ 281#define BNA_TXQ_WI_SEND_LSO (0x403) /* Multi-Frame Transmission */ 282#define BNA_TXQ_WI_EXTENSION (0x104) /* Extension WI */ 283 284/* TxQ Entry Control Flags */ 285#define BNA_TXQ_WI_CF_FCOE_CRC (1 << 8) 286#define BNA_TXQ_WI_CF_IPID_MODE (1 << 5) 287#define BNA_TXQ_WI_CF_INS_PRIO (1 << 4) 288#define BNA_TXQ_WI_CF_INS_VLAN (1 << 3) 289#define BNA_TXQ_WI_CF_UDP_CKSUM (1 << 2) 290#define BNA_TXQ_WI_CF_TCP_CKSUM (1 << 1) 291#define BNA_TXQ_WI_CF_IP_CKSUM (1 << 0) 292 293#define BNA_TXQ_WI_L4_HDR_N_OFFSET(_hdr_size, _offset) \ 294 (((_hdr_size) << 10) | ((_offset) & 0x3FF)) 295 296/* 297 * Completion Q defines 298 */ 299/* CQ Entry Flags */ 300#define BNA_CQ_EF_MAC_ERROR (1 << 0) 301#define BNA_CQ_EF_FCS_ERROR (1 << 1) 302#define BNA_CQ_EF_TOO_LONG (1 << 2) 303#define BNA_CQ_EF_FC_CRC_OK (1 << 3) 304 305#define BNA_CQ_EF_RSVD1 (1 << 4) 306#define BNA_CQ_EF_L4_CKSUM_OK (1 << 5) 307#define BNA_CQ_EF_L3_CKSUM_OK (1 << 6) 308#define BNA_CQ_EF_HDS_HEADER (1 << 7) 309 310#define BNA_CQ_EF_UDP (1 << 8) 311#define BNA_CQ_EF_TCP (1 << 9) 312#define BNA_CQ_EF_IP_OPTIONS (1 << 10) 313#define BNA_CQ_EF_IPV6 (1 << 11) 314 315#define BNA_CQ_EF_IPV4 (1 << 12) 316#define BNA_CQ_EF_VLAN (1 << 13) 317#define BNA_CQ_EF_RSS (1 << 14) 318#define BNA_CQ_EF_RSVD2 (1 << 15) 319 320#define BNA_CQ_EF_MCAST_MATCH (1 << 16) 321#define BNA_CQ_EF_MCAST (1 << 17) 322#define BNA_CQ_EF_BCAST (1 << 18) 323#define BNA_CQ_EF_REMOTE (1 << 19) 324 325#define BNA_CQ_EF_LOCAL (1 << 20) 326/* CAT2 ASIC does not use bit 21 as per the SPEC. 327 * Bit 31 is set in every end of frame completion 328 */ 329#define BNA_CQ_EF_EOP (1 << 31) 330 331/* Data structures */ 332 333struct bna_reg_offset { 334 u32 fn_int_status; 335 u32 fn_int_mask; 336}; 337 338struct bna_bit_defn { 339 u32 mbox_status_bits; 340 u32 mbox_mask_bits; 341 u32 error_status_bits; 342 u32 error_mask_bits; 343 u32 halt_status_bits; 344 u32 halt_mask_bits; 345}; 346 347struct bna_reg { 348 void __iomem *fn_int_status; 349 void __iomem *fn_int_mask; 350}; 351 352/* TxQ Vector (a.k.a. Tx-Buffer Descriptor) */ 353struct bna_dma_addr { 354 u32 msb; 355 u32 lsb; 356}; 357 358struct bna_txq_wi_vector { 359 u16 reserved; 360 u16 length; /* Only 14 LSB are valid */ 361 struct bna_dma_addr host_addr; /* Tx-Buf DMA addr */ 362}; 363 364/* TxQ Entry Structure 365 * 366 * BEWARE: Load values into this structure with correct endianness. 367 */ 368struct bna_txq_entry { 369 union { 370 struct { 371 u8 reserved; 372 u8 num_vectors; /* number of vectors present */ 373 u16 opcode; /* Either */ 374 /* BNA_TXQ_WI_SEND or */ 375 /* BNA_TXQ_WI_SEND_LSO */ 376 u16 flags; /* OR of all the flags */ 377 u16 l4_hdr_size_n_offset; 378 u16 vlan_tag; 379 u16 lso_mss; /* Only 14 LSB are valid */ 380 u32 frame_length; /* Only 24 LSB are valid */ 381 } wi; 382 383 struct { 384 u16 reserved; 385 u16 opcode; /* Must be */ 386 /* BNA_TXQ_WI_EXTENSION */ 387 u32 reserved2[3]; /* Place holder for */ 388 /* removed vector (12 bytes) */ 389 } wi_ext; 390 } hdr; 391 struct bna_txq_wi_vector vector[4]; 392}; 393 394/* RxQ Entry Structure */ 395struct bna_rxq_entry { /* Rx-Buffer */ 396 struct bna_dma_addr host_addr; /* Rx-Buffer DMA address */ 397}; 398 399/* CQ Entry Structure */ 400struct bna_cq_entry { 401 u32 flags; 402 u16 vlan_tag; 403 u16 length; 404 u32 rss_hash; 405 u8 valid; 406 u8 reserved1; 407 u8 reserved2; 408 u8 rxq_id; 409}; 410 411#endif /* __BNA_HW_DEFS_H__ */ 412