1menuconfig CAN_SJA1000
2	tristate "Philips/NXP SJA1000 devices"
3	depends on HAS_IOMEM
4
5if CAN_SJA1000
6
7config CAN_SJA1000_ISA
8	tristate "ISA Bus based legacy SJA1000 driver"
9	---help---
10	  This driver adds legacy support for SJA1000 chips connected to
11	  the ISA bus using I/O port, memory mapped or indirect access.
12
13config CAN_SJA1000_PLATFORM
14	tristate "Generic Platform Bus based SJA1000 driver"
15	---help---
16	  This driver adds support for the SJA1000 chips connected to
17	  the "platform bus" (Linux abstraction for directly to the
18	  processor attached devices).  Which can be found on various
19	  boards from Phytec (http://www.phytec.de) like the PCM027,
20	  PCM038. It also provides the OpenFirmware "platform bus" found
21	  on embedded systems with OpenFirmware bindings, e.g. if you
22	  have a PowerPC based system you may want to enable this option.
23
24config CAN_EMS_PCMCIA
25	tristate "EMS CPC-CARD Card"
26	depends on PCMCIA
27	---help---
28	  This driver is for the one or two channel CPC-CARD cards from
29	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
30
31config CAN_EMS_PCI
32	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
33	depends on PCI
34	---help---
35	  This driver is for the one, two or four channel CPC-PCI,
36	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
37	  (http://www.ems-wuensche.de).
38
39config CAN_PEAK_PCMCIA
40	tristate "PEAK PCAN-PC Card"
41	depends on PCMCIA
42	depends on HAS_IOPORT_MAP
43	---help---
44	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
45	  from PEAK-System (http://www.peak-system.com). To compile this
46	  driver as a module, choose M here: the module will be called
47	  peak_pcmcia.
48
49config CAN_PEAK_PCI
50	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
51	depends on PCI
52	---help---
53	  This driver is for the PCAN-PCI/PCIe/miniPCI cards
54	  (1, 2, 3 or 4 channels) from PEAK-System Technik
55	  (http://www.peak-system.com).
56
57config CAN_PEAK_PCIEC
58	bool "PEAK PCAN-ExpressCard Cards"
59	depends on CAN_PEAK_PCI
60	select I2C
61	select I2C_ALGOBIT
62	default y
63	---help---
64	  Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
65	  Technik. This will also automatically select I2C and I2C_ALGO
66	  configuration options.
67
68config CAN_KVASER_PCI
69	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
70	depends on PCI
71	---help---
72	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
73	  4 channel) from Kvaser (http://www.kvaser.com).
74
75config CAN_PLX_PCI
76	tristate "PLX90xx PCI-bridge based Cards"
77	depends on PCI
78	---help---
79	  This driver is for CAN interface cards based on
80	  the PLX90xx PCI bridge.
81	  Driver supports now:
82	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
83	   - Adlink PCI-7841/cPCI-7841 SE card
84	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
85	   - esd CAN-PCI/PMC/266
86	   - esd CAN-PCIe/2000
87	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
88	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
89	   - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
90	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
91
92config CAN_TSCAN1
93	tristate "TS-CAN1 PC104 boards"
94	depends on ISA
95	help
96	  This driver is for Technologic Systems' TSCAN-1 PC104 boards.
97	  http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
98	  The driver supports multiple boards and automatically configures them:
99	  PLD IO base addresses are read from jumpers JP1 and JP2,
100	  IRQ numbers are read from jumpers JP4 and JP5,
101	  SJA1000 IO base addresses are chosen heuristically (first that works).
102
103endif
104