1/* 2 * drivers/macintosh/adbhid.c 3 * 4 * ADB HID driver for Power Macintosh computers. 5 * 6 * Adapted from drivers/macintosh/mac_keyb.c by Franz Sirl. 7 * drivers/macintosh/mac_keyb.c was Copyright (C) 1996 Paul Mackerras 8 * with considerable contributions from Ben Herrenschmidt and others. 9 * 10 * Copyright (C) 2000 Franz Sirl. 11 * 12 * Adapted to ADB changes and support for more devices by 13 * Benjamin Herrenschmidt. Adapted from code in MkLinux 14 * and reworked. 15 * 16 * Supported devices: 17 * 18 * - Standard 1 button mouse 19 * - All standard Apple Extended protocol (handler ID 4) 20 * - mouseman and trackman mice & trackballs 21 * - PowerBook Trackpad (default setup: enable tapping) 22 * - MicroSpeed mouse & trackball (needs testing) 23 * - CH Products Trackball Pro (needs testing) 24 * - Contour Design (Contour Mouse) 25 * - Hunter digital (NoHandsMouse) 26 * - Kensignton TurboMouse 5 (needs testing) 27 * - Mouse Systems A3 mice and trackballs <aidan@kublai.com> 28 * - MacAlly 2-buttons mouse (needs testing) <pochini@denise.shiny.it> 29 * 30 * To do: 31 * 32 * Improve Kensington support. 33 * Split mouse/kbd 34 * Move to syfs 35 */ 36 37#include <linux/module.h> 38#include <linux/slab.h> 39#include <linux/init.h> 40#include <linux/notifier.h> 41#include <linux/input.h> 42 43#include <linux/adb.h> 44#include <linux/cuda.h> 45#include <linux/pmu.h> 46 47#include <asm/machdep.h> 48#ifdef CONFIG_PPC_PMAC 49#include <asm/backlight.h> 50#include <asm/pmac_feature.h> 51#endif 52 53MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>"); 54 55static int restore_capslock_events; 56module_param(restore_capslock_events, int, 0644); 57MODULE_PARM_DESC(restore_capslock_events, 58 "Produce keypress events for capslock on both keyup and keydown."); 59 60#define KEYB_KEYREG 0 /* register # for key up/down data */ 61#define KEYB_LEDREG 2 /* register # for leds on ADB keyboard */ 62#define MOUSE_DATAREG 0 /* reg# for movement/button codes from mouse */ 63 64static int adb_message_handler(struct notifier_block *, unsigned long, void *); 65static struct notifier_block adbhid_adb_notifier = { 66 .notifier_call = adb_message_handler, 67}; 68 69/* Some special keys */ 70#define ADB_KEY_DEL 0x33 71#define ADB_KEY_CMD 0x37 72#define ADB_KEY_CAPSLOCK 0x39 73#define ADB_KEY_FN 0x3f 74#define ADB_KEY_FWDEL 0x75 75#define ADB_KEY_POWER_OLD 0x7e 76#define ADB_KEY_POWER 0x7f 77 78static const u16 adb_to_linux_keycodes[128] = { 79 /* 0x00 */ KEY_A, /* 30 */ 80 /* 0x01 */ KEY_S, /* 31 */ 81 /* 0x02 */ KEY_D, /* 32 */ 82 /* 0x03 */ KEY_F, /* 33 */ 83 /* 0x04 */ KEY_H, /* 35 */ 84 /* 0x05 */ KEY_G, /* 34 */ 85 /* 0x06 */ KEY_Z, /* 44 */ 86 /* 0x07 */ KEY_X, /* 45 */ 87 /* 0x08 */ KEY_C, /* 46 */ 88 /* 0x09 */ KEY_V, /* 47 */ 89 /* 0x0a */ KEY_102ND, /* 86 */ 90 /* 0x0b */ KEY_B, /* 48 */ 91 /* 0x0c */ KEY_Q, /* 16 */ 92 /* 0x0d */ KEY_W, /* 17 */ 93 /* 0x0e */ KEY_E, /* 18 */ 94 /* 0x0f */ KEY_R, /* 19 */ 95 /* 0x10 */ KEY_Y, /* 21 */ 96 /* 0x11 */ KEY_T, /* 20 */ 97 /* 0x12 */ KEY_1, /* 2 */ 98 /* 0x13 */ KEY_2, /* 3 */ 99 /* 0x14 */ KEY_3, /* 4 */ 100 /* 0x15 */ KEY_4, /* 5 */ 101 /* 0x16 */ KEY_6, /* 7 */ 102 /* 0x17 */ KEY_5, /* 6 */ 103 /* 0x18 */ KEY_EQUAL, /* 13 */ 104 /* 0x19 */ KEY_9, /* 10 */ 105 /* 0x1a */ KEY_7, /* 8 */ 106 /* 0x1b */ KEY_MINUS, /* 12 */ 107 /* 0x1c */ KEY_8, /* 9 */ 108 /* 0x1d */ KEY_0, /* 11 */ 109 /* 0x1e */ KEY_RIGHTBRACE, /* 27 */ 110 /* 0x1f */ KEY_O, /* 24 */ 111 /* 0x20 */ KEY_U, /* 22 */ 112 /* 0x21 */ KEY_LEFTBRACE, /* 26 */ 113 /* 0x22 */ KEY_I, /* 23 */ 114 /* 0x23 */ KEY_P, /* 25 */ 115 /* 0x24 */ KEY_ENTER, /* 28 */ 116 /* 0x25 */ KEY_L, /* 38 */ 117 /* 0x26 */ KEY_J, /* 36 */ 118 /* 0x27 */ KEY_APOSTROPHE, /* 40 */ 119 /* 0x28 */ KEY_K, /* 37 */ 120 /* 0x29 */ KEY_SEMICOLON, /* 39 */ 121 /* 0x2a */ KEY_BACKSLASH, /* 43 */ 122 /* 0x2b */ KEY_COMMA, /* 51 */ 123 /* 0x2c */ KEY_SLASH, /* 53 */ 124 /* 0x2d */ KEY_N, /* 49 */ 125 /* 0x2e */ KEY_M, /* 50 */ 126 /* 0x2f */ KEY_DOT, /* 52 */ 127 /* 0x30 */ KEY_TAB, /* 15 */ 128 /* 0x31 */ KEY_SPACE, /* 57 */ 129 /* 0x32 */ KEY_GRAVE, /* 41 */ 130 /* 0x33 */ KEY_BACKSPACE, /* 14 */ 131 /* 0x34 */ KEY_KPENTER, /* 96 */ 132 /* 0x35 */ KEY_ESC, /* 1 */ 133 /* 0x36 */ KEY_LEFTCTRL, /* 29 */ 134 /* 0x37 */ KEY_LEFTMETA, /* 125 */ 135 /* 0x38 */ KEY_LEFTSHIFT, /* 42 */ 136 /* 0x39 */ KEY_CAPSLOCK, /* 58 */ 137 /* 0x3a */ KEY_LEFTALT, /* 56 */ 138 /* 0x3b */ KEY_LEFT, /* 105 */ 139 /* 0x3c */ KEY_RIGHT, /* 106 */ 140 /* 0x3d */ KEY_DOWN, /* 108 */ 141 /* 0x3e */ KEY_UP, /* 103 */ 142 /* 0x3f */ KEY_FN, /* 0x1d0 */ 143 /* 0x40 */ 0, 144 /* 0x41 */ KEY_KPDOT, /* 83 */ 145 /* 0x42 */ 0, 146 /* 0x43 */ KEY_KPASTERISK, /* 55 */ 147 /* 0x44 */ 0, 148 /* 0x45 */ KEY_KPPLUS, /* 78 */ 149 /* 0x46 */ 0, 150 /* 0x47 */ KEY_NUMLOCK, /* 69 */ 151 /* 0x48 */ 0, 152 /* 0x49 */ 0, 153 /* 0x4a */ 0, 154 /* 0x4b */ KEY_KPSLASH, /* 98 */ 155 /* 0x4c */ KEY_KPENTER, /* 96 */ 156 /* 0x4d */ 0, 157 /* 0x4e */ KEY_KPMINUS, /* 74 */ 158 /* 0x4f */ 0, 159 /* 0x50 */ 0, 160 /* 0x51 */ KEY_KPEQUAL, /* 117 */ 161 /* 0x52 */ KEY_KP0, /* 82 */ 162 /* 0x53 */ KEY_KP1, /* 79 */ 163 /* 0x54 */ KEY_KP2, /* 80 */ 164 /* 0x55 */ KEY_KP3, /* 81 */ 165 /* 0x56 */ KEY_KP4, /* 75 */ 166 /* 0x57 */ KEY_KP5, /* 76 */ 167 /* 0x58 */ KEY_KP6, /* 77 */ 168 /* 0x59 */ KEY_KP7, /* 71 */ 169 /* 0x5a */ 0, 170 /* 0x5b */ KEY_KP8, /* 72 */ 171 /* 0x5c */ KEY_KP9, /* 73 */ 172 /* 0x5d */ KEY_YEN, /* 124 */ 173 /* 0x5e */ KEY_RO, /* 89 */ 174 /* 0x5f */ KEY_KPCOMMA, /* 121 */ 175 /* 0x60 */ KEY_F5, /* 63 */ 176 /* 0x61 */ KEY_F6, /* 64 */ 177 /* 0x62 */ KEY_F7, /* 65 */ 178 /* 0x63 */ KEY_F3, /* 61 */ 179 /* 0x64 */ KEY_F8, /* 66 */ 180 /* 0x65 */ KEY_F9, /* 67 */ 181 /* 0x66 */ KEY_HANJA, /* 123 */ 182 /* 0x67 */ KEY_F11, /* 87 */ 183 /* 0x68 */ KEY_HANGEUL, /* 122 */ 184 /* 0x69 */ KEY_SYSRQ, /* 99 */ 185 /* 0x6a */ 0, 186 /* 0x6b */ KEY_SCROLLLOCK, /* 70 */ 187 /* 0x6c */ 0, 188 /* 0x6d */ KEY_F10, /* 68 */ 189 /* 0x6e */ KEY_COMPOSE, /* 127 */ 190 /* 0x6f */ KEY_F12, /* 88 */ 191 /* 0x70 */ 0, 192 /* 0x71 */ KEY_PAUSE, /* 119 */ 193 /* 0x72 */ KEY_INSERT, /* 110 */ 194 /* 0x73 */ KEY_HOME, /* 102 */ 195 /* 0x74 */ KEY_PAGEUP, /* 104 */ 196 /* 0x75 */ KEY_DELETE, /* 111 */ 197 /* 0x76 */ KEY_F4, /* 62 */ 198 /* 0x77 */ KEY_END, /* 107 */ 199 /* 0x78 */ KEY_F2, /* 60 */ 200 /* 0x79 */ KEY_PAGEDOWN, /* 109 */ 201 /* 0x7a */ KEY_F1, /* 59 */ 202 /* 0x7b */ KEY_RIGHTSHIFT, /* 54 */ 203 /* 0x7c */ KEY_RIGHTALT, /* 100 */ 204 /* 0x7d */ KEY_RIGHTCTRL, /* 97 */ 205 /* 0x7e */ KEY_RIGHTMETA, /* 126 */ 206 /* 0x7f */ KEY_POWER, /* 116 */ 207}; 208 209struct adbhid { 210 struct input_dev *input; 211 int id; 212 int default_id; 213 int original_handler_id; 214 int current_handler_id; 215 int mouse_kind; 216 u16 *keycode; 217 char name[64]; 218 char phys[32]; 219 int flags; 220}; 221 222#define FLAG_FN_KEY_PRESSED 0x00000001 223#define FLAG_POWER_FROM_FN 0x00000002 224#define FLAG_EMU_FWDEL_DOWN 0x00000004 225#define FLAG_CAPSLOCK_TRANSLATE 0x00000008 226#define FLAG_CAPSLOCK_DOWN 0x00000010 227#define FLAG_CAPSLOCK_IGNORE_NEXT 0x00000020 228#define FLAG_POWER_KEY_PRESSED 0x00000040 229 230static struct adbhid *adbhid[16]; 231 232static void adbhid_probe(void); 233 234static void adbhid_input_keycode(int, int, int); 235 236static void init_trackpad(int id); 237static void init_trackball(int id); 238static void init_turbomouse(int id); 239static void init_microspeed(int id); 240static void init_ms_a3(int id); 241 242static struct adb_ids keyboard_ids; 243static struct adb_ids mouse_ids; 244static struct adb_ids buttons_ids; 245 246/* Kind of keyboard, see Apple technote 1152 */ 247#define ADB_KEYBOARD_UNKNOWN 0 248#define ADB_KEYBOARD_ANSI 0x0100 249#define ADB_KEYBOARD_ISO 0x0200 250#define ADB_KEYBOARD_JIS 0x0300 251 252/* Kind of mouse */ 253#define ADBMOUSE_STANDARD_100 0 /* Standard 100cpi mouse (handler 1) */ 254#define ADBMOUSE_STANDARD_200 1 /* Standard 200cpi mouse (handler 2) */ 255#define ADBMOUSE_EXTENDED 2 /* Apple Extended mouse (handler 4) */ 256#define ADBMOUSE_TRACKBALL 3 /* TrackBall (handler 4) */ 257#define ADBMOUSE_TRACKPAD 4 /* Apple's PowerBook trackpad (handler 4) */ 258#define ADBMOUSE_TURBOMOUSE5 5 /* Turbomouse 5 (previously req. mousehack) */ 259#define ADBMOUSE_MICROSPEED 6 /* Microspeed mouse (&trackball ?), MacPoint */ 260#define ADBMOUSE_TRACKBALLPRO 7 /* Trackball Pro (special buttons) */ 261#define ADBMOUSE_MS_A3 8 /* Mouse systems A3 trackball (handler 3) */ 262#define ADBMOUSE_MACALLY2 9 /* MacAlly 2-button mouse */ 263 264static void 265adbhid_keyboard_input(unsigned char *data, int nb, int apoll) 266{ 267 int id = (data[0] >> 4) & 0x0f; 268 269 if (!adbhid[id]) { 270 printk(KERN_ERR "ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n", 271 id, data[0], data[1], data[2], data[3]); 272 return; 273 } 274 275 /* first check this is from register 0 */ 276 if (nb != 3 || (data[0] & 3) != KEYB_KEYREG) 277 return; /* ignore it */ 278 adbhid_input_keycode(id, data[1], 0); 279 if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f))) 280 adbhid_input_keycode(id, data[2], 0); 281} 282 283static void 284adbhid_input_keycode(int id, int scancode, int repeat) 285{ 286 struct adbhid *ahid = adbhid[id]; 287 int keycode, up_flag, key; 288 289 keycode = scancode & 0x7f; 290 up_flag = scancode & 0x80; 291 292 if (restore_capslock_events) { 293 if (keycode == ADB_KEY_CAPSLOCK && !up_flag) { 294 /* Key pressed, turning on the CapsLock LED. 295 * The next 0xff will be interpreted as a release. */ 296 if (ahid->flags & FLAG_CAPSLOCK_IGNORE_NEXT) { 297 /* Throw away this key event if it happens 298 * just after resume. */ 299 ahid->flags &= ~FLAG_CAPSLOCK_IGNORE_NEXT; 300 return; 301 } else { 302 ahid->flags |= FLAG_CAPSLOCK_TRANSLATE 303 | FLAG_CAPSLOCK_DOWN; 304 } 305 } else if (scancode == 0xff && 306 !(ahid->flags & FLAG_POWER_KEY_PRESSED)) { 307 /* Scancode 0xff usually signifies that the capslock 308 * key was either pressed or released, or that the 309 * power button was released. */ 310 if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) { 311 keycode = ADB_KEY_CAPSLOCK; 312 if (ahid->flags & FLAG_CAPSLOCK_DOWN) { 313 /* Key released */ 314 up_flag = 1; 315 ahid->flags &= ~FLAG_CAPSLOCK_DOWN; 316 } else { 317 /* Key pressed */ 318 up_flag = 0; 319 ahid->flags &= ~FLAG_CAPSLOCK_TRANSLATE; 320 } 321 } else { 322 printk(KERN_INFO "Spurious caps lock event " 323 "(scancode 0xff).\n"); 324 } 325 } 326 } 327 328 switch (keycode) { 329 case ADB_KEY_CAPSLOCK: 330 if (!restore_capslock_events) { 331 /* Generate down/up events for CapsLock every time. */ 332 input_report_key(ahid->input, KEY_CAPSLOCK, 1); 333 input_sync(ahid->input); 334 input_report_key(ahid->input, KEY_CAPSLOCK, 0); 335 input_sync(ahid->input); 336 return; 337 } 338 break; 339#ifdef CONFIG_PPC_PMAC 340 case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */ 341 switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO, 342 NULL, PMAC_MB_INFO_MODEL, 0)) { 343 case PMAC_TYPE_COMET: 344 case PMAC_TYPE_HOOPER: 345 case PMAC_TYPE_KANGA: 346 keycode = ADB_KEY_POWER; 347 } 348 break; 349 case ADB_KEY_POWER: 350 /* Keep track of the power key state */ 351 if (up_flag) 352 ahid->flags &= ~FLAG_POWER_KEY_PRESSED; 353 else 354 ahid->flags |= FLAG_POWER_KEY_PRESSED; 355 356 /* Fn + Command will produce a bogus "power" keycode */ 357 if (ahid->flags & FLAG_FN_KEY_PRESSED) { 358 keycode = ADB_KEY_CMD; 359 if (up_flag) 360 ahid->flags &= ~FLAG_POWER_FROM_FN; 361 else 362 ahid->flags |= FLAG_POWER_FROM_FN; 363 } else if (ahid->flags & FLAG_POWER_FROM_FN) { 364 keycode = ADB_KEY_CMD; 365 ahid->flags &= ~FLAG_POWER_FROM_FN; 366 } 367 break; 368 case ADB_KEY_FN: 369 /* Keep track of the Fn key state */ 370 if (up_flag) { 371 ahid->flags &= ~FLAG_FN_KEY_PRESSED; 372 /* Emulate Fn+delete = forward delete */ 373 if (ahid->flags & FLAG_EMU_FWDEL_DOWN) { 374 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN; 375 keycode = ADB_KEY_FWDEL; 376 break; 377 } 378 } else 379 ahid->flags |= FLAG_FN_KEY_PRESSED; 380 break; 381 case ADB_KEY_DEL: 382 /* Emulate Fn+delete = forward delete */ 383 if (ahid->flags & FLAG_FN_KEY_PRESSED) { 384 keycode = ADB_KEY_FWDEL; 385 if (up_flag) 386 ahid->flags &= ~FLAG_EMU_FWDEL_DOWN; 387 else 388 ahid->flags |= FLAG_EMU_FWDEL_DOWN; 389 } 390 break; 391#endif /* CONFIG_PPC_PMAC */ 392 } 393 394 key = adbhid[id]->keycode[keycode]; 395 if (key) { 396 input_report_key(adbhid[id]->input, key, !up_flag); 397 input_sync(adbhid[id]->input); 398 } else 399 printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode, 400 up_flag ? "released" : "pressed"); 401 402} 403 404static void 405adbhid_mouse_input(unsigned char *data, int nb, int autopoll) 406{ 407 int id = (data[0] >> 4) & 0x0f; 408 409 if (!adbhid[id]) { 410 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id); 411 return; 412 } 413 414 /* 415 Handler 1 -- 100cpi original Apple mouse protocol. 416 Handler 2 -- 200cpi original Apple mouse protocol. 417 418 For Apple's standard one-button mouse protocol the data array will 419 contain the following values: 420 421 BITS COMMENTS 422 data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. 423 data[1] = bxxx xxxx First button and x-axis motion. 424 data[2] = byyy yyyy Second button and y-axis motion. 425 426 Handler 4 -- Apple Extended mouse protocol. 427 428 For Apple's 3-button mouse protocol the data array will contain the 429 following values: 430 431 BITS COMMENTS 432 data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. 433 data[1] = bxxx xxxx Left button and x-axis motion. 434 data[2] = byyy yyyy Second button and y-axis motion. 435 data[3] = byyy bxxx Third button and fourth button. Y is additional 436 high bits of y-axis motion. XY is additional 437 high bits of x-axis motion. 438 439 MacAlly 2-button mouse protocol. 440 441 For MacAlly 2-button mouse protocol the data array will contain the 442 following values: 443 444 BITS COMMENTS 445 data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. 446 data[1] = bxxx xxxx Left button and x-axis motion. 447 data[2] = byyy yyyy Right button and y-axis motion. 448 data[3] = ???? ???? unknown 449 data[4] = ???? ???? unknown 450 451 */ 452 453 /* If it's a trackpad, we alias the second button to the first. 454 NOTE: Apple sends an ADB flush command to the trackpad when 455 the first (the real) button is released. We could do 456 this here using async flush requests. 457 */ 458 switch (adbhid[id]->mouse_kind) 459 { 460 case ADBMOUSE_TRACKPAD: 461 data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80); 462 data[2] = data[2] | 0x80; 463 break; 464 case ADBMOUSE_MICROSPEED: 465 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7); 466 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6); 467 data[3] = (data[3] & 0x77) | ((data[3] & 0x04) << 5) 468 | (data[3] & 0x08); 469 break; 470 case ADBMOUSE_TRACKBALLPRO: 471 data[1] = (data[1] & 0x7f) | (((data[3] & 0x04) << 5) 472 & ((data[3] & 0x08) << 4)); 473 data[2] = (data[2] & 0x7f) | ((data[3] & 0x01) << 7); 474 data[3] = (data[3] & 0x77) | ((data[3] & 0x02) << 6); 475 break; 476 case ADBMOUSE_MS_A3: 477 data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7); 478 data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6); 479 data[3] = ((data[3] & 0x04) << 5); 480 break; 481 case ADBMOUSE_MACALLY2: 482 data[3] = (data[2] & 0x80) ? 0x80 : 0x00; 483 data[2] |= 0x80; /* Right button is mapped as button 3 */ 484 nb=4; 485 break; 486 } 487 488 input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); 489 input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); 490 491 if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD) 492 input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); 493 494 input_report_rel(adbhid[id]->input, REL_X, 495 ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 )); 496 input_report_rel(adbhid[id]->input, REL_Y, 497 ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 )); 498 499 input_sync(adbhid[id]->input); 500} 501 502static void 503adbhid_buttons_input(unsigned char *data, int nb, int autopoll) 504{ 505 int id = (data[0] >> 4) & 0x0f; 506 507 if (!adbhid[id]) { 508 printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id); 509 return; 510 } 511 512 switch (adbhid[id]->original_handler_id) { 513 default: 514 case 0x02: /* Adjustable keyboard button device */ 515 { 516 int down = (data[1] == (data[1] & 0xf)); 517 518 switch (data[1] & 0x0f) { 519 case 0x0: /* microphone */ 520 input_report_key(adbhid[id]->input, KEY_SOUND, down); 521 break; 522 523 case 0x1: /* mute */ 524 input_report_key(adbhid[id]->input, KEY_MUTE, down); 525 break; 526 527 case 0x2: /* volume decrease */ 528 input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); 529 break; 530 531 case 0x3: /* volume increase */ 532 input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); 533 break; 534 535 default: 536 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n", 537 data[0], data[1], data[2], data[3]); 538 break; 539 } 540 } 541 break; 542 543 case 0x1f: /* Powerbook button device */ 544 { 545 int down = (data[1] == (data[1] & 0xf)); 546 547 /* 548 * XXX: Where is the contrast control for the passive? 549 * -- Cort 550 */ 551 552 switch (data[1] & 0x0f) { 553 case 0x8: /* mute */ 554 input_report_key(adbhid[id]->input, KEY_MUTE, down); 555 break; 556 557 case 0x7: /* volume decrease */ 558 input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); 559 break; 560 561 case 0x6: /* volume increase */ 562 input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); 563 break; 564 565 case 0xb: /* eject */ 566 input_report_key(adbhid[id]->input, KEY_EJECTCD, down); 567 break; 568 569 case 0xa: /* brightness decrease */ 570#ifdef CONFIG_PMAC_BACKLIGHT 571 if (down) 572 pmac_backlight_key_down(); 573#endif 574 input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); 575 break; 576 577 case 0x9: /* brightness increase */ 578#ifdef CONFIG_PMAC_BACKLIGHT 579 if (down) 580 pmac_backlight_key_up(); 581#endif 582 input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); 583 break; 584 585 case 0xc: /* videomode switch */ 586 input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down); 587 break; 588 589 case 0xd: /* keyboard illumination toggle */ 590 input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down); 591 break; 592 593 case 0xe: /* keyboard illumination decrease */ 594 input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down); 595 break; 596 597 case 0xf: 598 switch (data[1]) { 599 case 0x8f: 600 case 0x0f: 601 /* keyboard illumination increase */ 602 input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down); 603 break; 604 605 case 0x7f: 606 case 0xff: 607 /* keypad overlay toogle */ 608 break; 609 610 default: 611 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n", 612 data[0], data[1], data[2], data[3]); 613 break; 614 } 615 break; 616 default: 617 printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n", 618 data[0], data[1], data[2], data[3]); 619 break; 620 } 621 } 622 break; 623 } 624 625 input_sync(adbhid[id]->input); 626} 627 628static struct adb_request led_request; 629static int leds_pending[16]; 630static int leds_req_pending; 631static int pending_devs[16]; 632static int pending_led_start; 633static int pending_led_end; 634static DEFINE_SPINLOCK(leds_lock); 635 636static void leds_done(struct adb_request *req) 637{ 638 int leds = 0, device = 0, pending = 0; 639 unsigned long flags; 640 641 spin_lock_irqsave(&leds_lock, flags); 642 643 if (pending_led_start != pending_led_end) { 644 device = pending_devs[pending_led_start]; 645 leds = leds_pending[device] & 0xff; 646 leds_pending[device] = 0; 647 pending_led_start++; 648 pending_led_start = (pending_led_start < 16) ? pending_led_start : 0; 649 pending = leds_req_pending; 650 } else 651 leds_req_pending = 0; 652 spin_unlock_irqrestore(&leds_lock, flags); 653 if (pending) 654 adb_request(&led_request, leds_done, 0, 3, 655 ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds); 656} 657 658static void real_leds(unsigned char leds, int device) 659{ 660 unsigned long flags; 661 662 spin_lock_irqsave(&leds_lock, flags); 663 if (!leds_req_pending) { 664 leds_req_pending = 1; 665 spin_unlock_irqrestore(&leds_lock, flags); 666 adb_request(&led_request, leds_done, 0, 3, 667 ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds); 668 return; 669 } else { 670 if (!(leds_pending[device] & 0x100)) { 671 pending_devs[pending_led_end] = device; 672 pending_led_end++; 673 pending_led_end = (pending_led_end < 16) ? pending_led_end : 0; 674 } 675 leds_pending[device] = leds | 0x100; 676 } 677 spin_unlock_irqrestore(&leds_lock, flags); 678} 679 680/* 681 * Event callback from the input module. Events that change the state of 682 * the hardware are processed here. 683 */ 684static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) 685{ 686 struct adbhid *adbhid = input_get_drvdata(dev); 687 unsigned char leds; 688 689 switch (type) { 690 case EV_LED: 691 leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) | 692 (test_bit(LED_NUML, dev->led) ? 1 : 0) | 693 (test_bit(LED_CAPSL, dev->led) ? 2 : 0); 694 real_leds(leds, adbhid->id); 695 return 0; 696 } 697 698 return -1; 699} 700 701static void 702adbhid_kbd_capslock_remember(void) 703{ 704 struct adbhid *ahid; 705 int i; 706 707 for (i = 1; i < 16; i++) { 708 ahid = adbhid[i]; 709 710 if (ahid && ahid->id == ADB_KEYBOARD) 711 if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) 712 ahid->flags |= FLAG_CAPSLOCK_IGNORE_NEXT; 713 } 714} 715 716static int 717adb_message_handler(struct notifier_block *this, unsigned long code, void *x) 718{ 719 switch (code) { 720 case ADB_MSG_PRE_RESET: 721 case ADB_MSG_POWERDOWN: 722 /* Stop the repeat timer. Autopoll is already off at this point */ 723 { 724 int i; 725 for (i = 1; i < 16; i++) { 726 if (adbhid[i]) 727 del_timer_sync(&adbhid[i]->input->timer); 728 } 729 } 730 731 /* Stop pending led requests */ 732 while (leds_req_pending) 733 adb_poll(); 734 735 /* After resume, and if the capslock LED is on, the PMU will 736 * send a "capslock down" key event. This confuses the 737 * restore_capslock_events logic. Remember if the capslock 738 * LED was on before suspend so the unwanted key event can 739 * be ignored after resume. */ 740 if (restore_capslock_events) 741 adbhid_kbd_capslock_remember(); 742 743 break; 744 745 case ADB_MSG_POST_RESET: 746 adbhid_probe(); 747 break; 748 } 749 return NOTIFY_DONE; 750} 751 752static int 753adbhid_input_register(int id, int default_id, int original_handler_id, 754 int current_handler_id, int mouse_kind) 755{ 756 struct adbhid *hid; 757 struct input_dev *input_dev; 758 int err; 759 int i; 760 761 if (adbhid[id]) { 762 printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id); 763 return -EEXIST; 764 } 765 766 adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL); 767 input_dev = input_allocate_device(); 768 if (!hid || !input_dev) { 769 err = -ENOMEM; 770 goto fail; 771 } 772 773 sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id); 774 775 hid->input = input_dev; 776 hid->id = default_id; 777 hid->original_handler_id = original_handler_id; 778 hid->current_handler_id = current_handler_id; 779 hid->mouse_kind = mouse_kind; 780 hid->flags = 0; 781 input_set_drvdata(input_dev, hid); 782 input_dev->name = hid->name; 783 input_dev->phys = hid->phys; 784 input_dev->id.bustype = BUS_ADB; 785 input_dev->id.vendor = 0x0001; 786 input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id; 787 input_dev->id.version = 0x0100; 788 789 switch (default_id) { 790 case ADB_KEYBOARD: 791 hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL); 792 if (!hid->keycode) { 793 err = -ENOMEM; 794 goto fail; 795 } 796 797 sprintf(hid->name, "ADB keyboard"); 798 799 memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes)); 800 801 printk(KERN_INFO "Detected ADB keyboard, type "); 802 switch (original_handler_id) { 803 default: 804 printk("<unknown>.\n"); 805 input_dev->id.version = ADB_KEYBOARD_UNKNOWN; 806 break; 807 808 case 0x01: case 0x02: case 0x03: case 0x06: case 0x08: 809 case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C: 810 case 0xC0: case 0xC3: case 0xC6: 811 printk("ANSI.\n"); 812 input_dev->id.version = ADB_KEYBOARD_ANSI; 813 break; 814 815 case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D: 816 case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1: 817 case 0xC4: case 0xC7: 818 printk("ISO, swapping keys.\n"); 819 input_dev->id.version = ADB_KEYBOARD_ISO; 820 i = hid->keycode[10]; 821 hid->keycode[10] = hid->keycode[50]; 822 hid->keycode[50] = i; 823 break; 824 825 case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A: 826 case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9: 827 printk("JIS.\n"); 828 input_dev->id.version = ADB_KEYBOARD_JIS; 829 break; 830 } 831 832 for (i = 0; i < 128; i++) 833 if (hid->keycode[i]) 834 set_bit(hid->keycode[i], input_dev->keybit); 835 836 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) | 837 BIT_MASK(EV_REP); 838 input_dev->ledbit[0] = BIT_MASK(LED_SCROLLL) | 839 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_NUML); 840 input_dev->event = adbhid_kbd_event; 841 input_dev->keycodemax = KEY_FN; 842 input_dev->keycodesize = sizeof(hid->keycode[0]); 843 break; 844 845 case ADB_MOUSE: 846 sprintf(hid->name, "ADB mouse"); 847 848 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); 849 input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | 850 BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); 851 input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); 852 break; 853 854 case ADB_MISC: 855 switch (original_handler_id) { 856 case 0x02: /* Adjustable keyboard button device */ 857 sprintf(hid->name, "ADB adjustable keyboard buttons"); 858 input_dev->evbit[0] = BIT_MASK(EV_KEY) | 859 BIT_MASK(EV_REP); 860 set_bit(KEY_SOUND, input_dev->keybit); 861 set_bit(KEY_MUTE, input_dev->keybit); 862 set_bit(KEY_VOLUMEUP, input_dev->keybit); 863 set_bit(KEY_VOLUMEDOWN, input_dev->keybit); 864 break; 865 case 0x1f: /* Powerbook button device */ 866 sprintf(hid->name, "ADB Powerbook buttons"); 867 input_dev->evbit[0] = BIT_MASK(EV_KEY) | 868 BIT_MASK(EV_REP); 869 set_bit(KEY_MUTE, input_dev->keybit); 870 set_bit(KEY_VOLUMEUP, input_dev->keybit); 871 set_bit(KEY_VOLUMEDOWN, input_dev->keybit); 872 set_bit(KEY_BRIGHTNESSUP, input_dev->keybit); 873 set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit); 874 set_bit(KEY_EJECTCD, input_dev->keybit); 875 set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit); 876 set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit); 877 set_bit(KEY_KBDILLUMDOWN, input_dev->keybit); 878 set_bit(KEY_KBDILLUMUP, input_dev->keybit); 879 break; 880 } 881 if (hid->name[0]) 882 break; 883 /* else fall through */ 884 885 default: 886 printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n"); 887 err = -ENODEV; 888 goto fail; 889 } 890 891 input_dev->keycode = hid->keycode; 892 893 err = input_register_device(input_dev); 894 if (err) 895 goto fail; 896 897 if (default_id == ADB_KEYBOARD) { 898 /* HACK WARNING!! This should go away as soon there is an utility 899 * to control that for event devices. 900 */ 901 input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */ 902 input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */ 903 } 904 905 return 0; 906 907 fail: input_free_device(input_dev); 908 if (hid) { 909 kfree(hid->keycode); 910 kfree(hid); 911 } 912 adbhid[id] = NULL; 913 return err; 914} 915 916static void adbhid_input_unregister(int id) 917{ 918 input_unregister_device(adbhid[id]->input); 919 kfree(adbhid[id]->keycode); 920 kfree(adbhid[id]); 921 adbhid[id] = NULL; 922} 923 924 925static u16 926adbhid_input_reregister(int id, int default_id, int org_handler_id, 927 int cur_handler_id, int mk) 928{ 929 if (adbhid[id]) { 930 if (adbhid[id]->input->id.product != 931 ((id << 12)|(default_id << 8)|org_handler_id)) { 932 adbhid_input_unregister(id); 933 adbhid_input_register(id, default_id, org_handler_id, 934 cur_handler_id, mk); 935 } 936 } else 937 adbhid_input_register(id, default_id, org_handler_id, 938 cur_handler_id, mk); 939 return 1<<id; 940} 941 942static void 943adbhid_input_devcleanup(u16 exist) 944{ 945 int i; 946 for(i=1; i<16; i++) 947 if (adbhid[i] && !(exist&(1<<i))) 948 adbhid_input_unregister(i); 949} 950 951static void 952adbhid_probe(void) 953{ 954 struct adb_request req; 955 int i, default_id, org_handler_id, cur_handler_id; 956 u16 reg = 0; 957 958 adb_register(ADB_MOUSE, 0, &mouse_ids, adbhid_mouse_input); 959 adb_register(ADB_KEYBOARD, 0, &keyboard_ids, adbhid_keyboard_input); 960 adb_register(ADB_MISC, 0, &buttons_ids, adbhid_buttons_input); 961 962 for (i = 0; i < keyboard_ids.nids; i++) { 963 int id = keyboard_ids.id[i]; 964 965 adb_get_infos(id, &default_id, &org_handler_id); 966 967 /* turn off all leds */ 968 adb_request(&req, NULL, ADBREQ_SYNC, 3, 969 ADB_WRITEREG(id, KEYB_LEDREG), 0xff, 0xff); 970 971 /* Enable full feature set of the keyboard 972 ->get it to send separate codes for left and right shift, 973 control, option keys */ 974#if 0 /* handler 5 doesn't send separate codes for R modifiers */ 975 if (adb_try_handler_change(id, 5)) 976 printk("ADB keyboard at %d, handler set to 5\n", id); 977 else 978#endif 979 if (adb_try_handler_change(id, 3)) 980 printk("ADB keyboard at %d, handler set to 3\n", id); 981 else 982 printk("ADB keyboard at %d, handler 1\n", id); 983 984 adb_get_infos(id, &default_id, &cur_handler_id); 985 reg |= adbhid_input_reregister(id, default_id, org_handler_id, 986 cur_handler_id, 0); 987 } 988 989 for (i = 0; i < buttons_ids.nids; i++) { 990 int id = buttons_ids.id[i]; 991 992 adb_get_infos(id, &default_id, &org_handler_id); 993 reg |= adbhid_input_reregister(id, default_id, org_handler_id, 994 org_handler_id, 0); 995 } 996 997 /* Try to switch all mice to handler 4, or 2 for three-button 998 mode and full resolution. */ 999 for (i = 0; i < mouse_ids.nids; i++) { 1000 int id = mouse_ids.id[i]; 1001 int mouse_kind; 1002 1003 adb_get_infos(id, &default_id, &org_handler_id); 1004 1005 if (adb_try_handler_change(id, 4)) { 1006 printk("ADB mouse at %d, handler set to 4", id); 1007 mouse_kind = ADBMOUSE_EXTENDED; 1008 } 1009 else if (adb_try_handler_change(id, 0x2F)) { 1010 printk("ADB mouse at %d, handler set to 0x2F", id); 1011 mouse_kind = ADBMOUSE_MICROSPEED; 1012 } 1013 else if (adb_try_handler_change(id, 0x42)) { 1014 printk("ADB mouse at %d, handler set to 0x42", id); 1015 mouse_kind = ADBMOUSE_TRACKBALLPRO; 1016 } 1017 else if (adb_try_handler_change(id, 0x66)) { 1018 printk("ADB mouse at %d, handler set to 0x66", id); 1019 mouse_kind = ADBMOUSE_MICROSPEED; 1020 } 1021 else if (adb_try_handler_change(id, 0x5F)) { 1022 printk("ADB mouse at %d, handler set to 0x5F", id); 1023 mouse_kind = ADBMOUSE_MICROSPEED; 1024 } 1025 else if (adb_try_handler_change(id, 3)) { 1026 printk("ADB mouse at %d, handler set to 3", id); 1027 mouse_kind = ADBMOUSE_MS_A3; 1028 } 1029 else if (adb_try_handler_change(id, 2)) { 1030 printk("ADB mouse at %d, handler set to 2", id); 1031 mouse_kind = ADBMOUSE_STANDARD_200; 1032 } 1033 else { 1034 printk("ADB mouse at %d, handler 1", id); 1035 mouse_kind = ADBMOUSE_STANDARD_100; 1036 } 1037 1038 if ((mouse_kind == ADBMOUSE_TRACKBALLPRO) 1039 || (mouse_kind == ADBMOUSE_MICROSPEED)) { 1040 init_microspeed(id); 1041 } else if (mouse_kind == ADBMOUSE_MS_A3) { 1042 init_ms_a3(id); 1043 } else if (mouse_kind == ADBMOUSE_EXTENDED) { 1044 /* 1045 * Register 1 is usually used for device 1046 * identification. Here, we try to identify 1047 * a known device and call the appropriate 1048 * init function. 1049 */ 1050 adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1, 1051 ADB_READREG(id, 1)); 1052 1053 if ((req.reply_len) && 1054 (req.reply[1] == 0x9a) && ((req.reply[2] == 0x21) 1055 || (req.reply[2] == 0x20))) { 1056 mouse_kind = ADBMOUSE_TRACKBALL; 1057 init_trackball(id); 1058 } 1059 else if ((req.reply_len >= 4) && 1060 (req.reply[1] == 0x74) && (req.reply[2] == 0x70) && 1061 (req.reply[3] == 0x61) && (req.reply[4] == 0x64)) { 1062 mouse_kind = ADBMOUSE_TRACKPAD; 1063 init_trackpad(id); 1064 } 1065 else if ((req.reply_len >= 4) && 1066 (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) && 1067 (req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) { 1068 mouse_kind = ADBMOUSE_TURBOMOUSE5; 1069 init_turbomouse(id); 1070 } 1071 else if ((req.reply_len == 9) && 1072 (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) && 1073 (req.reply[3] == 0x49) && (req.reply[4] == 0x54)) { 1074 if (adb_try_handler_change(id, 0x42)) { 1075 printk("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id); 1076 mouse_kind = ADBMOUSE_MACALLY2; 1077 } 1078 } 1079 } 1080 printk("\n"); 1081 1082 adb_get_infos(id, &default_id, &cur_handler_id); 1083 reg |= adbhid_input_reregister(id, default_id, org_handler_id, 1084 cur_handler_id, mouse_kind); 1085 } 1086 adbhid_input_devcleanup(reg); 1087} 1088 1089static void 1090init_trackpad(int id) 1091{ 1092 struct adb_request req; 1093 unsigned char r1_buffer[8]; 1094 1095 printk(" (trackpad)"); 1096 1097 adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1, 1098 ADB_READREG(id,1)); 1099 if (req.reply_len < 8) 1100 printk("bad length for reg. 1\n"); 1101 else 1102 { 1103 memcpy(r1_buffer, &req.reply[1], 8); 1104 1105 adb_request(&req, NULL, ADBREQ_SYNC, 9, 1106 ADB_WRITEREG(id,1), 1107 r1_buffer[0], 1108 r1_buffer[1], 1109 r1_buffer[2], 1110 r1_buffer[3], 1111 r1_buffer[4], 1112 r1_buffer[5], 1113 0x0d, 1114 r1_buffer[7]); 1115 1116 adb_request(&req, NULL, ADBREQ_SYNC, 9, 1117 ADB_WRITEREG(id,2), 1118 0x99, 1119 0x94, 1120 0x19, 1121 0xff, 1122 0xb2, 1123 0x8a, 1124 0x1b, 1125 0x50); 1126 1127 adb_request(&req, NULL, ADBREQ_SYNC, 9, 1128 ADB_WRITEREG(id,1), 1129 r1_buffer[0], 1130 r1_buffer[1], 1131 r1_buffer[2], 1132 r1_buffer[3], 1133 r1_buffer[4], 1134 r1_buffer[5], 1135 0x03, /*r1_buffer[6],*/ 1136 r1_buffer[7]); 1137 1138 /* Without this flush, the trackpad may be locked up */ 1139 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); 1140 } 1141} 1142 1143static void 1144init_trackball(int id) 1145{ 1146 struct adb_request req; 1147 1148 printk(" (trackman/mouseman)"); 1149 1150 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1151 ADB_WRITEREG(id,1), 00,0x81); 1152 1153 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1154 ADB_WRITEREG(id,1), 01,0x81); 1155 1156 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1157 ADB_WRITEREG(id,1), 02,0x81); 1158 1159 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1160 ADB_WRITEREG(id,1), 03,0x38); 1161 1162 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1163 ADB_WRITEREG(id,1), 00,0x81); 1164 1165 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1166 ADB_WRITEREG(id,1), 01,0x81); 1167 1168 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1169 ADB_WRITEREG(id,1), 02,0x81); 1170 1171 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1172 ADB_WRITEREG(id,1), 03,0x38); 1173} 1174 1175static void 1176init_turbomouse(int id) 1177{ 1178 struct adb_request req; 1179 1180 printk(" (TurboMouse 5)"); 1181 1182 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); 1183 1184 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3)); 1185 1186 adb_request(&req, NULL, ADBREQ_SYNC, 9, 1187 ADB_WRITEREG(3,2), 1188 0xe7, 1189 0x8c, 1190 0, 1191 0, 1192 0, 1193 0xff, 1194 0xff, 1195 0x94); 1196 1197 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3)); 1198 1199 adb_request(&req, NULL, ADBREQ_SYNC, 9, 1200 ADB_WRITEREG(3,2), 1201 0xa5, 1202 0x14, 1203 0, 1204 0, 1205 0x69, 1206 0xff, 1207 0xff, 1208 0x27); 1209} 1210 1211static void 1212init_microspeed(int id) 1213{ 1214 struct adb_request req; 1215 1216 printk(" (Microspeed/MacPoint or compatible)"); 1217 1218 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); 1219 1220 /* This will initialize mice using the Microspeed, MacPoint and 1221 other compatible firmware. Bit 12 enables extended protocol. 1222 1223 Register 1 Listen (4 Bytes) 1224 0 - 3 Button is mouse (set also for double clicking!!!) 1225 4 - 7 Button is locking (affects change speed also) 1226 8 - 11 Button changes speed 1227 12 1 = Extended mouse mode, 0 = normal mouse mode 1228 13 - 15 unused 0 1229 16 - 23 normal speed 1230 24 - 31 changed speed 1231 1232 Register 1 talk holds version and product identification information. 1233 Register 1 Talk (4 Bytes): 1234 0 - 7 Product code 1235 8 - 23 undefined, reserved 1236 24 - 31 Version number 1237 1238 Speed 0 is max. 1 to 255 set speed in increments of 1/256 of max. 1239 */ 1240 adb_request(&req, NULL, ADBREQ_SYNC, 5, 1241 ADB_WRITEREG(id,1), 1242 0x20, /* alt speed = 0x20 (rather slow) */ 1243 0x00, /* norm speed = 0x00 (fastest) */ 1244 0x10, /* extended protocol, no speed change */ 1245 0x07); /* all buttons enabled as mouse buttons, no locking */ 1246 1247 1248 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); 1249} 1250 1251static void 1252init_ms_a3(int id) 1253{ 1254 struct adb_request req; 1255 1256 printk(" (Mouse Systems A3 Mouse, or compatible)"); 1257 adb_request(&req, NULL, ADBREQ_SYNC, 3, 1258 ADB_WRITEREG(id, 0x2), 1259 0x00, 1260 0x07); 1261 1262 adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); 1263} 1264 1265static int __init adbhid_init(void) 1266{ 1267#ifndef CONFIG_MAC 1268 if (!machine_is(chrp) && !machine_is(powermac)) 1269 return 0; 1270#endif 1271 1272 led_request.complete = 1; 1273 1274 adbhid_probe(); 1275 1276 blocking_notifier_chain_register(&adb_client_list, 1277 &adbhid_adb_notifier); 1278 1279 return 0; 1280} 1281 1282static void __exit adbhid_exit(void) 1283{ 1284} 1285 1286module_init(adbhid_init); 1287module_exit(adbhid_exit); 1288