1/**************************************************************************
2 * Copyright (c) 2011, Intel Corporation.
3 * All Rights Reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 *
18 **************************************************************************/
19
20#include <linux/backlight.h>
21#include <linux/module.h>
22#include <linux/dmi.h>
23#include <drm/drmP.h>
24#include <drm/drm.h>
25#include <drm/gma_drm.h>
26#include "psb_drv.h"
27#include "psb_reg.h"
28#include "psb_intel_reg.h"
29#include <asm/intel-mid.h>
30#include <asm/intel_scu_ipc.h>
31#include "mid_bios.h"
32#include "intel_bios.h"
33
34static int oaktrail_output_init(struct drm_device *dev)
35{
36	struct drm_psb_private *dev_priv = dev->dev_private;
37	if (dev_priv->iLVDS_enable)
38		oaktrail_lvds_init(dev, &dev_priv->mode_dev);
39	else
40		dev_err(dev->dev, "DSI is not supported\n");
41	if (dev_priv->hdmi_priv)
42		oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
43
44	psb_intel_sdvo_init(dev, SDVOB);
45
46	return 0;
47}
48
49/*
50 *	Provide the low level interfaces for the Moorestown backlight
51 */
52
53#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
54
55#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
56#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
57#define BLC_PWM_FREQ_CALC_CONSTANT 32
58#define MHz 1000000
59#define BLC_ADJUSTMENT_MAX 100
60
61static struct backlight_device *oaktrail_backlight_device;
62static int oaktrail_brightness;
63
64static int oaktrail_set_brightness(struct backlight_device *bd)
65{
66	struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
67	struct drm_psb_private *dev_priv = dev->dev_private;
68	int level = bd->props.brightness;
69	u32 blc_pwm_ctl;
70	u32 max_pwm_blc;
71
72	/* Percentage 1-100% being valid */
73	if (level < 1)
74		level = 1;
75
76	if (gma_power_begin(dev, 0)) {
77		/* Calculate and set the brightness value */
78		max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
79		blc_pwm_ctl = level * max_pwm_blc / 100;
80
81		/* Adjust the backlight level with the percent in
82		 * dev_priv->blc_adj1;
83		 */
84		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
85		blc_pwm_ctl = blc_pwm_ctl / 100;
86
87		/* Adjust the backlight level with the percent in
88		 * dev_priv->blc_adj2;
89		 */
90		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
91		blc_pwm_ctl = blc_pwm_ctl / 100;
92
93		/* force PWM bit on */
94		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
95		REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
96		gma_power_end(dev);
97	}
98	oaktrail_brightness = level;
99	return 0;
100}
101
102static int oaktrail_get_brightness(struct backlight_device *bd)
103{
104	/* return locally cached var instead of HW read (due to DPST etc.) */
105	/* FIXME: ideally return actual value in case firmware fiddled with
106	   it */
107	return oaktrail_brightness;
108}
109
110static int device_backlight_init(struct drm_device *dev)
111{
112	struct drm_psb_private *dev_priv = dev->dev_private;
113	unsigned long core_clock;
114	u16 bl_max_freq;
115	uint32_t value;
116	uint32_t blc_pwm_precision_factor;
117
118	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
119	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
120	bl_max_freq = 256;
121	/* this needs to be set elsewhere */
122	blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
123
124	core_clock = dev_priv->core_freq;
125
126	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
127	value *= blc_pwm_precision_factor;
128	value /= bl_max_freq;
129	value /= blc_pwm_precision_factor;
130
131	if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
132			return -ERANGE;
133
134	if (gma_power_begin(dev, false)) {
135		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
136		REG_WRITE(BLC_PWM_CTL, value | (value << 16));
137		gma_power_end(dev);
138	}
139	return 0;
140}
141
142static const struct backlight_ops oaktrail_ops = {
143	.get_brightness = oaktrail_get_brightness,
144	.update_status  = oaktrail_set_brightness,
145};
146
147static int oaktrail_backlight_init(struct drm_device *dev)
148{
149	struct drm_psb_private *dev_priv = dev->dev_private;
150	int ret;
151	struct backlight_properties props;
152
153	memset(&props, 0, sizeof(struct backlight_properties));
154	props.max_brightness = 100;
155	props.type = BACKLIGHT_PLATFORM;
156
157	oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
158				NULL, (void *)dev, &oaktrail_ops, &props);
159
160	if (IS_ERR(oaktrail_backlight_device))
161		return PTR_ERR(oaktrail_backlight_device);
162
163	ret = device_backlight_init(dev);
164	if (ret < 0) {
165		backlight_device_unregister(oaktrail_backlight_device);
166		return ret;
167	}
168	oaktrail_backlight_device->props.brightness = 100;
169	oaktrail_backlight_device->props.max_brightness = 100;
170	backlight_update_status(oaktrail_backlight_device);
171	dev_priv->backlight_device = oaktrail_backlight_device;
172	return 0;
173}
174
175#endif
176
177/*
178 *	Provide the Moorestown specific chip logic and low level methods
179 *	for power management
180 */
181
182/**
183 *	oaktrail_save_display_registers	-	save registers lost on suspend
184 *	@dev: our DRM device
185 *
186 *	Save the state we need in order to be able to restore the interface
187 *	upon resume from suspend
188 */
189static int oaktrail_save_display_registers(struct drm_device *dev)
190{
191	struct drm_psb_private *dev_priv = dev->dev_private;
192	struct psb_save_area *regs = &dev_priv->regs;
193	struct psb_pipe *p = &regs->pipe[0];
194	int i;
195	u32 pp_stat;
196
197	/* Display arbitration control + watermarks */
198	regs->psb.saveDSPARB = PSB_RVDC32(DSPARB);
199	regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1);
200	regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2);
201	regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3);
202	regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4);
203	regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5);
204	regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6);
205	regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
206
207	/* Pipe & plane A info */
208	p->conf = PSB_RVDC32(PIPEACONF);
209	p->src = PSB_RVDC32(PIPEASRC);
210	p->fp0 = PSB_RVDC32(MRST_FPA0);
211	p->fp1 = PSB_RVDC32(MRST_FPA1);
212	p->dpll = PSB_RVDC32(MRST_DPLL_A);
213	p->htotal = PSB_RVDC32(HTOTAL_A);
214	p->hblank = PSB_RVDC32(HBLANK_A);
215	p->hsync = PSB_RVDC32(HSYNC_A);
216	p->vtotal = PSB_RVDC32(VTOTAL_A);
217	p->vblank = PSB_RVDC32(VBLANK_A);
218	p->vsync = PSB_RVDC32(VSYNC_A);
219	regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
220	p->cntr = PSB_RVDC32(DSPACNTR);
221	p->stride = PSB_RVDC32(DSPASTRIDE);
222	p->addr = PSB_RVDC32(DSPABASE);
223	p->surf = PSB_RVDC32(DSPASURF);
224	p->linoff = PSB_RVDC32(DSPALINOFF);
225	p->tileoff = PSB_RVDC32(DSPATILEOFF);
226
227	/* Save cursor regs */
228	regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
229	regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
230	regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
231
232	/* Save palette (gamma) */
233	for (i = 0; i < 256; i++)
234		p->palette[i] = PSB_RVDC32(PALETTE_A + (i << 2));
235
236	if (dev_priv->hdmi_priv)
237		oaktrail_hdmi_save(dev);
238
239	/* Save performance state */
240	regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
241
242	/* LVDS state */
243	regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
244	regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
245	regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
246	regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
247	regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
248	regs->psb.saveLVDS = PSB_RVDC32(LVDS);
249	regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
250	regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
251	regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
252	regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
253
254	/* HW overlay */
255	regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD);
256	regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
257	regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
258	regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
259	regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
260	regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
261	regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
262
263	/* DPST registers */
264	regs->psb.saveHISTOGRAM_INT_CONTROL_REG =
265					PSB_RVDC32(HISTOGRAM_INT_CONTROL);
266	regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG =
267					PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
268	regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
269
270	if (dev_priv->iLVDS_enable) {
271		/* Shut down the panel */
272		PSB_WVDC32(0, PP_CONTROL);
273
274		do {
275			pp_stat = PSB_RVDC32(PP_STATUS);
276		} while (pp_stat & 0x80000000);
277
278		/* Turn off the plane */
279		PSB_WVDC32(0x58000000, DSPACNTR);
280		/* Trigger the plane disable */
281		PSB_WVDC32(0, DSPASURF);
282
283		/* Wait ~4 ticks */
284		msleep(4);
285
286		/* Turn off pipe */
287		PSB_WVDC32(0x0, PIPEACONF);
288		/* Wait ~8 ticks */
289		msleep(8);
290
291		/* Turn off PLLs */
292		PSB_WVDC32(0, MRST_DPLL_A);
293	}
294	return 0;
295}
296
297/**
298 *	oaktrail_restore_display_registers	-	restore lost register state
299 *	@dev: our DRM device
300 *
301 *	Restore register state that was lost during suspend and resume.
302 */
303static int oaktrail_restore_display_registers(struct drm_device *dev)
304{
305	struct drm_psb_private *dev_priv = dev->dev_private;
306	struct psb_save_area *regs = &dev_priv->regs;
307	struct psb_pipe *p = &regs->pipe[0];
308	u32 pp_stat;
309	int i;
310
311	/* Display arbitration + watermarks */
312	PSB_WVDC32(regs->psb.saveDSPARB, DSPARB);
313	PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1);
314	PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2);
315	PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3);
316	PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4);
317	PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5);
318	PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6);
319	PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT);
320
321	/* Make sure VGA plane is off. it initializes to on after reset!*/
322	PSB_WVDC32(0x80000000, VGACNTRL);
323
324	/* set the plls */
325	PSB_WVDC32(p->fp0, MRST_FPA0);
326	PSB_WVDC32(p->fp1, MRST_FPA1);
327
328	/* Actually enable it */
329	PSB_WVDC32(p->dpll, MRST_DPLL_A);
330	DRM_UDELAY(150);
331
332	/* Restore mode */
333	PSB_WVDC32(p->htotal, HTOTAL_A);
334	PSB_WVDC32(p->hblank, HBLANK_A);
335	PSB_WVDC32(p->hsync, HSYNC_A);
336	PSB_WVDC32(p->vtotal, VTOTAL_A);
337	PSB_WVDC32(p->vblank, VBLANK_A);
338	PSB_WVDC32(p->vsync, VSYNC_A);
339	PSB_WVDC32(p->src, PIPEASRC);
340	PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A);
341
342	/* Restore performance mode*/
343	PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE);
344
345	/* Enable the pipe*/
346	if (dev_priv->iLVDS_enable)
347		PSB_WVDC32(p->conf, PIPEACONF);
348
349	/* Set up the plane*/
350	PSB_WVDC32(p->linoff, DSPALINOFF);
351	PSB_WVDC32(p->stride, DSPASTRIDE);
352	PSB_WVDC32(p->tileoff, DSPATILEOFF);
353
354	/* Enable the plane */
355	PSB_WVDC32(p->cntr, DSPACNTR);
356	PSB_WVDC32(p->surf, DSPASURF);
357
358	/* Enable Cursor A */
359	PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR);
360	PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS);
361	PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE);
362
363	/* Restore palette (gamma) */
364	for (i = 0; i < 256; i++)
365		PSB_WVDC32(p->palette[i], PALETTE_A + (i << 2));
366
367	if (dev_priv->hdmi_priv)
368		oaktrail_hdmi_restore(dev);
369
370	if (dev_priv->iLVDS_enable) {
371		PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
372		PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/
373		PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL);
374		PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
375		PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
376		PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL);
377		PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON);
378		PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF);
379		PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE);
380		PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL);
381	}
382
383	/* Wait for cycle delay */
384	do {
385		pp_stat = PSB_RVDC32(PP_STATUS);
386	} while (pp_stat & 0x08000000);
387
388	/* Wait for panel power up */
389	do {
390		pp_stat = PSB_RVDC32(PP_STATUS);
391	} while (pp_stat & 0x10000000);
392
393	/* Restore HW overlay */
394	PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD);
395	PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0);
396	PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1);
397	PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2);
398	PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3);
399	PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4);
400	PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5);
401
402	/* DPST registers */
403	PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG,
404						HISTOGRAM_INT_CONTROL);
405	PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG,
406						HISTOGRAM_LOGIC_CONTROL);
407	PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
408
409	return 0;
410}
411
412/**
413 *	oaktrail_power_down	-	power down the display island
414 *	@dev: our DRM device
415 *
416 *	Power down the display interface of our device
417 */
418static int oaktrail_power_down(struct drm_device *dev)
419{
420	struct drm_psb_private *dev_priv = dev->dev_private;
421	u32 pwr_mask ;
422	u32 pwr_sts;
423
424	pwr_mask = PSB_PWRGT_DISPLAY_MASK;
425	outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
426
427	while (true) {
428		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
429		if ((pwr_sts & pwr_mask) == pwr_mask)
430			break;
431		else
432			udelay(10);
433	}
434	return 0;
435}
436
437/*
438 * oaktrail_power_up
439 *
440 * Restore power to the specified island(s) (powergating)
441 */
442static int oaktrail_power_up(struct drm_device *dev)
443{
444	struct drm_psb_private *dev_priv = dev->dev_private;
445	u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
446	u32 pwr_sts, pwr_cnt;
447
448	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
449	pwr_cnt &= ~pwr_mask;
450	outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
451
452	while (true) {
453		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
454		if ((pwr_sts & pwr_mask) == 0)
455			break;
456		else
457			udelay(10);
458	}
459	return 0;
460}
461
462/* Oaktrail */
463static const struct psb_offset oaktrail_regmap[2] = {
464	{
465		.fp0 = MRST_FPA0,
466		.fp1 = MRST_FPA1,
467		.cntr = DSPACNTR,
468		.conf = PIPEACONF,
469		.src = PIPEASRC,
470		.dpll = MRST_DPLL_A,
471		.htotal = HTOTAL_A,
472		.hblank = HBLANK_A,
473		.hsync = HSYNC_A,
474		.vtotal = VTOTAL_A,
475		.vblank = VBLANK_A,
476		.vsync = VSYNC_A,
477		.stride = DSPASTRIDE,
478		.size = DSPASIZE,
479		.pos = DSPAPOS,
480		.surf = DSPASURF,
481		.addr = MRST_DSPABASE,
482		.base = MRST_DSPABASE,
483		.status = PIPEASTAT,
484		.linoff = DSPALINOFF,
485		.tileoff = DSPATILEOFF,
486		.palette = PALETTE_A,
487	},
488	{
489		.fp0 = FPB0,
490		.fp1 = FPB1,
491		.cntr = DSPBCNTR,
492		.conf = PIPEBCONF,
493		.src = PIPEBSRC,
494		.dpll = DPLL_B,
495		.htotal = HTOTAL_B,
496		.hblank = HBLANK_B,
497		.hsync = HSYNC_B,
498		.vtotal = VTOTAL_B,
499		.vblank = VBLANK_B,
500		.vsync = VSYNC_B,
501		.stride = DSPBSTRIDE,
502		.size = DSPBSIZE,
503		.pos = DSPBPOS,
504		.surf = DSPBSURF,
505		.addr = DSPBBASE,
506		.base = DSPBBASE,
507		.status = PIPEBSTAT,
508		.linoff = DSPBLINOFF,
509		.tileoff = DSPBTILEOFF,
510		.palette = PALETTE_B,
511	},
512};
513
514static int oaktrail_chip_setup(struct drm_device *dev)
515{
516	struct drm_psb_private *dev_priv = dev->dev_private;
517	int ret;
518
519	if (pci_enable_msi(dev->pdev))
520		dev_warn(dev->dev, "Enabling MSI failed!\n");
521
522	dev_priv->regmap = oaktrail_regmap;
523
524	ret = mid_chip_setup(dev);
525	if (ret < 0)
526		return ret;
527	if (!dev_priv->has_gct) {
528		/* Now pull the BIOS data */
529		psb_intel_opregion_init(dev);
530		psb_intel_init_bios(dev);
531	}
532	gma_intel_setup_gmbus(dev);
533	oaktrail_hdmi_setup(dev);
534	return 0;
535}
536
537static void oaktrail_teardown(struct drm_device *dev)
538{
539	struct drm_psb_private *dev_priv = dev->dev_private;
540
541	gma_intel_teardown_gmbus(dev);
542	oaktrail_hdmi_teardown(dev);
543	if (!dev_priv->has_gct)
544		psb_intel_destroy_bios(dev);
545}
546
547const struct psb_ops oaktrail_chip_ops = {
548	.name = "Oaktrail",
549	.accel_2d = 1,
550	.pipes = 2,
551	.crtcs = 2,
552	.hdmi_mask = (1 << 1),
553	.lvds_mask = (1 << 0),
554	.sdvo_mask = (1 << 1),
555	.cursor_needs_phys = 0,
556	.sgx_offset = MRST_SGX_OFFSET,
557
558	.chip_setup = oaktrail_chip_setup,
559	.chip_teardown = oaktrail_teardown,
560	.crtc_helper = &oaktrail_helper_funcs,
561	.crtc_funcs = &psb_intel_crtc_funcs,
562
563	.output_init = oaktrail_output_init,
564
565#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
566	.backlight_init = oaktrail_backlight_init,
567#endif
568
569	.save_regs = oaktrail_save_display_registers,
570	.restore_regs = oaktrail_restore_display_registers,
571	.power_down = oaktrail_power_down,
572	.power_up = oaktrail_power_up,
573
574	.i2c_bus = 1,
575};
576