1#
2# SATA/PATA driver configuration
3#
4
5config HAVE_PATA_PLATFORM
6	bool
7	help
8	  This is an internal configuration node for any machine that
9	  uses pata-platform driver to enable the relevant driver in the
10	  configuration structure without having to submit endless patches
11	  to update the PATA_PLATFORM entry.
12
13menuconfig ATA
14	tristate "Serial ATA and Parallel ATA drivers (libata)"
15	depends on HAS_IOMEM
16	depends on BLOCK
17	depends on !(M32R || M68K || S390) || BROKEN
18	select SCSI
19	select GLOB
20	---help---
21	  If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
22	  any other ATA device under Linux, say Y and make sure that you know
23	  the name of your ATA host adapter (the card inside your computer
24	  that "speaks" the ATA protocol, also called ATA controller),
25	  because you will be asked for it.
26
27	  NOTE: ATA enables basic SCSI support; *however*,
28	  'SCSI disk support', 'SCSI tape support', or
29	  'SCSI CDROM support' may also be needed,
30	  depending on your hardware configuration.
31
32if ATA
33
34config ATA_NONSTANDARD
35       bool
36       default n
37
38config ATA_VERBOSE_ERROR
39	bool "Verbose ATA error reporting"
40	default y
41	help
42	  This option adds parsing of ATA command descriptions and error bits
43	  in libata kernel output, making it easier to interpret.
44	  This option will enlarge the kernel by approx. 6KB. Disable it only
45	  if kernel size is more important than ease of debugging.
46
47	  If unsure, say Y.
48
49config ATA_ACPI
50	bool "ATA ACPI Support"
51	depends on ACPI && PCI
52	default y
53	help
54	  This option adds support for ATA-related ACPI objects.
55	  These ACPI objects add the ability to retrieve taskfiles
56	  from the ACPI BIOS and write them to the disk controller.
57	  These objects may be related to performance, security,
58	  power management, or other areas.
59	  You can disable this at kernel boot time by using the
60	  option libata.noacpi=1
61
62config SATA_ZPODD
63	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
64	depends on ATA_ACPI && PM
65	default n
66	help
67	  This option adds support for SATA Zero Power Optical Disc
68	  Drive (ZPODD). It requires both the ODD and the platform
69	  support, and if enabled, will automatically power on/off the
70	  ODD when certain condition is satisfied. This does not impact
71	  end user's experience of the ODD, only power is saved when
72	  the ODD is not in use (i.e. no disc inside).
73
74	  If unsure, say N.
75
76config SATA_PMP
77	bool "SATA Port Multiplier support"
78	default y
79	help
80	  This option adds support for SATA Port Multipliers
81	  (the SATA version of an ethernet hub, or SAS expander).
82
83comment "Controllers with non-SFF native interface"
84
85config SATA_AHCI
86	tristate "AHCI SATA support"
87	depends on PCI
88	help
89	  This option enables support for AHCI Serial ATA.
90
91	  If unsure, say N.
92
93config SATA_AHCI_PLATFORM
94	tristate "Platform AHCI SATA support"
95	help
96	  This option enables support for Platform AHCI Serial ATA
97	  controllers.
98
99	  If unsure, say N.
100
101config AHCI_DA850
102	tristate "DaVinci DA850 AHCI SATA support"
103	depends on ARCH_DAVINCI_DA850
104	help
105	  This option enables support for the DaVinci DA850 SoC's
106	  onboard AHCI SATA.
107
108	  If unsure, say N.
109
110config AHCI_ST
111	tristate "ST AHCI SATA support"
112	depends on ARCH_STI
113	help
114	  This option enables support for ST AHCI SATA controller.
115
116	  If unsure, say N.
117
118config AHCI_IMX
119	tristate "Freescale i.MX AHCI SATA support"
120	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
121	help
122	  This option enables support for the Freescale i.MX SoC's
123	  onboard AHCI SATA.
124
125	  If unsure, say N.
126
127config AHCI_MVEBU
128	tristate "Marvell EBU AHCI SATA support"
129	depends on ARCH_MVEBU
130	help
131	  This option enables support for the Marvebu EBU SoC's
132	  onboard AHCI SATA.
133
134	  If unsure, say N.
135
136config AHCI_SUNXI
137	tristate "Allwinner sunxi AHCI SATA support"
138	depends on ARCH_SUNXI
139	help
140	  This option enables support for the Allwinner sunxi SoC's
141	  onboard AHCI SATA.
142
143	  If unsure, say N.
144
145config AHCI_TEGRA
146	tristate "NVIDIA Tegra124 AHCI SATA support"
147	depends on ARCH_TEGRA
148	help
149	  This option enables support for the NVIDIA Tegra124 SoC's
150	  onboard AHCI SATA.
151
152	  If unsure, say N.
153
154config AHCI_XGENE
155	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
156	depends on PHY_XGENE
157	help
158	 This option enables support for APM X-Gene SoC SATA host controller.
159
160config SATA_FSL
161	tristate "Freescale 3.0Gbps SATA support"
162	depends on FSL_SOC
163	help
164	  This option enables support for Freescale 3.0Gbps SATA controller.
165	  It can be found on MPC837x and MPC8315.
166
167	  If unsure, say N.
168
169config SATA_INIC162X
170	tristate "Initio 162x SATA support (Very Experimental)"
171	depends on PCI
172	help
173	  This option enables support for Initio 162x Serial ATA.
174
175config SATA_ACARD_AHCI
176	tristate "ACard AHCI variant (ATP 8620)"
177	depends on PCI
178	help
179	  This option enables support for Acard.
180
181	  If unsure, say N.
182
183config SATA_SIL24
184	tristate "Silicon Image 3124/3132 SATA support"
185	depends on PCI
186	help
187	  This option enables support for Silicon Image 3124/3132 Serial ATA.
188
189	  If unsure, say N.
190
191config ATA_SFF
192	bool "ATA SFF support (for legacy IDE and PATA)"
193	default y
194	help
195	  This option adds support for ATA controllers with SFF
196	  compliant or similar programming interface.
197
198	  SFF is the legacy IDE interface that has been around since
199	  the dawn of time.  Almost all PATA controllers have an
200	  SFF interface.  Many SATA controllers have an SFF interface
201	  when configured into a legacy compatibility mode.
202
203	  For users with exclusively modern controllers like AHCI,
204	  Silicon Image 3124, or Marvell 6440, you may choose to
205	  disable this unneeded SFF support.
206
207	  If unsure, say Y.
208
209if ATA_SFF
210
211comment "SFF controllers with custom DMA interface"
212
213config PDC_ADMA
214	tristate "Pacific Digital ADMA support"
215	depends on PCI
216	help
217	  This option enables support for Pacific Digital ADMA controllers
218
219	  If unsure, say N.
220
221config PATA_OCTEON_CF
222	tristate "OCTEON Boot Bus Compact Flash support"
223	depends on CAVIUM_OCTEON_SOC
224	help
225	  This option enables a polled compact flash driver for use with
226	  compact flash cards attached to the OCTEON boot bus.
227
228	  If unsure, say N.
229
230config SATA_QSTOR
231	tristate "Pacific Digital SATA QStor support"
232	depends on PCI
233	help
234	  This option enables support for Pacific Digital Serial ATA QStor.
235
236	  If unsure, say N.
237
238config SATA_SX4
239	tristate "Promise SATA SX4 support (Experimental)"
240	depends on PCI
241	help
242	  This option enables support for Promise Serial ATA SX4.
243
244	  If unsure, say N.
245
246config ATA_BMDMA
247	bool "ATA BMDMA support"
248	default y
249	help
250	  This option adds support for SFF ATA controllers with BMDMA
251	  capability.  BMDMA stands for bus-master DMA and is the
252	  de facto DMA interface for SFF controllers.
253
254	  If unsure, say Y.
255
256if ATA_BMDMA
257
258comment "SATA SFF controllers with BMDMA"
259
260config ATA_PIIX
261	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
262	depends on PCI
263	help
264	  This option enables support for ICH5/6/7/8 Serial ATA
265	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
266	  host controllers.
267
268	  If unsure, say N.
269
270config SATA_DWC
271	tristate "DesignWare Cores SATA support"
272	depends on 460EX
273	select DW_DMAC
274	help
275	  This option enables support for the on-chip SATA controller of the
276	  AppliedMicro processor 460EX.
277
278	  If unsure, say N.
279
280config SATA_DWC_DEBUG
281	bool "Debugging driver version"
282	depends on SATA_DWC
283	help
284	  This option enables debugging output in the driver.
285
286config SATA_DWC_VDEBUG
287	bool "Verbose debug output"
288	depends on SATA_DWC_DEBUG
289	help
290	  This option enables the taskfile dumping and NCQ debugging.
291
292config SATA_HIGHBANK
293	tristate "Calxeda Highbank SATA support"
294	depends on ARCH_HIGHBANK || COMPILE_TEST
295	help
296	  This option enables support for the Calxeda Highbank SoC's
297	  onboard SATA.
298
299	  If unsure, say N.
300
301config SATA_MV
302	tristate "Marvell SATA support"
303	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
304		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
305	select GENERIC_PHY
306	help
307	  This option enables support for the Marvell Serial ATA family.
308	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
309	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
310
311	  If unsure, say N.
312
313config SATA_NV
314	tristate "NVIDIA SATA support"
315	depends on PCI
316	help
317	  This option enables support for NVIDIA Serial ATA.
318
319	  If unsure, say N.
320
321config SATA_PROMISE
322	tristate "Promise SATA TX2/TX4 support"
323	depends on PCI
324	help
325	  This option enables support for Promise Serial ATA TX2/TX4.
326
327	  If unsure, say N.
328
329config SATA_RCAR
330	tristate "Renesas R-Car SATA support"
331	depends on ARCH_SHMOBILE || COMPILE_TEST
332	help
333	  This option enables support for Renesas R-Car Serial ATA.
334
335	  If unsure, say N.
336
337config SATA_SIL
338	tristate "Silicon Image SATA support"
339	depends on PCI
340	help
341	  This option enables support for Silicon Image Serial ATA.
342
343	  If unsure, say N.
344
345config SATA_SIS
346	tristate "SiS 964/965/966/180 SATA support"
347	depends on PCI
348	select PATA_SIS
349	help
350	  This option enables support for SiS Serial ATA on
351	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
352	  The PATA support for SiS 180 requires additionally to
353	  enable the PATA_SIS driver in the config.
354	  If unsure, say N.
355
356config SATA_SVW
357	tristate "ServerWorks Frodo / Apple K2 SATA support"
358	depends on PCI
359	help
360	  This option enables support for Broadcom/Serverworks/Apple K2
361	  SATA support.
362
363	  If unsure, say N.
364
365config SATA_ULI
366	tristate "ULi Electronics SATA support"
367	depends on PCI
368	help
369	  This option enables support for ULi Electronics SATA.
370
371	  If unsure, say N.
372
373config SATA_VIA
374	tristate "VIA SATA support"
375	depends on PCI
376	help
377	  This option enables support for VIA Serial ATA.
378
379	  If unsure, say N.
380
381config SATA_VITESSE
382	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
383	depends on PCI
384	help
385	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
386
387	  If unsure, say N.
388
389comment "PATA SFF controllers with BMDMA"
390
391config PATA_ALI
392	tristate "ALi PATA support"
393	depends on PCI
394	help
395	  This option enables support for the ALi ATA interfaces
396	  found on the many ALi chipsets.
397
398	  If unsure, say N.
399
400config PATA_AMD
401	tristate "AMD/NVidia PATA support"
402	depends on PCI
403	help
404	  This option enables support for the AMD and NVidia PATA
405	  interfaces found on the chipsets for Athlon/Athlon64.
406
407	  If unsure, say N.
408
409config PATA_ARASAN_CF
410	tristate "ARASAN CompactFlash PATA Controller Support"
411	depends on ARCH_SPEAR13XX || COMPILE_TEST
412	depends on DMADEVICES
413	select DMA_ENGINE
414	help
415	  Say Y here to support the ARASAN CompactFlash PATA controller
416
417config PATA_ARTOP
418	tristate "ARTOP 6210/6260 PATA support"
419	depends on PCI
420	help
421	  This option enables support for ARTOP PATA controllers.
422
423	  If unsure, say N.
424
425config PATA_ATIIXP
426	tristate "ATI PATA support"
427	depends on PCI
428	help
429	  This option enables support for the ATI ATA interfaces
430	  found on the many ATI chipsets.
431
432	  If unsure, say N.
433
434config PATA_ATP867X
435	tristate "ARTOP/Acard ATP867X PATA support"
436	depends on PCI
437	help
438	  This option enables support for ARTOP/Acard ATP867X PATA
439	  controllers.
440
441	  If unsure, say N.
442
443config PATA_BF54X
444	tristate "Blackfin 54x ATAPI support"
445	depends on BF542 || BF548 || BF549
446	help
447	  This option enables support for the built-in ATAPI controller on
448	  Blackfin 54x family chips.
449
450	  If unsure, say N.
451
452config PATA_CMD64X
453	tristate "CMD64x PATA support"
454	depends on PCI
455	help
456	  This option enables support for the CMD64x series chips
457	  except for the CMD640.
458
459	  If unsure, say N.
460
461config PATA_CS5520
462	tristate "CS5510/5520 PATA support"
463	depends on PCI && (X86_32 || COMPILE_TEST)
464	help
465	  This option enables support for the Cyrix 5510/5520
466	  companion chip used with the MediaGX/Geode processor family.
467
468	  If unsure, say N.
469
470config PATA_CS5530
471	tristate "CS5530 PATA support"
472	depends on PCI && (X86_32 || COMPILE_TEST)
473	help
474	  This option enables support for the Cyrix/NatSemi/AMD CS5530
475	  companion chip used with the MediaGX/Geode processor family.
476
477	  If unsure, say N.
478
479config PATA_CS5535
480	tristate "CS5535 PATA support (Experimental)"
481	depends on PCI && X86_32
482	help
483	  This option enables support for the NatSemi/AMD CS5535
484	  companion chip used with the Geode processor family.
485
486	  If unsure, say N.
487
488config PATA_CS5536
489	tristate "CS5536 PATA support"
490	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
491	help
492	  This option enables support for the AMD CS5536
493	  companion chip used with the Geode LX processor family.
494
495	  If unsure, say N.
496
497config PATA_CYPRESS
498	tristate "Cypress CY82C693 PATA support (Very Experimental)"
499	depends on PCI
500	help
501	  This option enables support for the Cypress/Contaq CY82C693
502	  chipset found in some Alpha systems
503
504	  If unsure, say N.
505
506config PATA_EFAR
507	tristate "EFAR SLC90E66 support"
508	depends on PCI
509	help
510	  This option enables support for the EFAR SLC90E66
511	  IDE controller found on some older machines.
512
513	  If unsure, say N.
514
515config PATA_EP93XX
516	tristate "Cirrus Logic EP93xx PATA support"
517	depends on ARCH_EP93XX
518	help
519	  This option enables support for the PATA controller in
520	  the Cirrus Logic EP9312 and EP9315 ARM CPU.
521
522	  If unsure, say N.
523
524config PATA_HPT366
525	tristate "HPT 366/368 PATA support"
526	depends on PCI
527	help
528	  This option enables support for the HPT 366 and 368
529	  PATA controllers via the new ATA layer.
530
531	  If unsure, say N.
532
533config PATA_HPT37X
534	tristate "HPT 370/370A/371/372/374/302 PATA support"
535	depends on PCI
536	help
537	  This option enables support for the majority of the later HPT
538	  PATA controllers via the new ATA layer.
539
540	  If unsure, say N.
541
542config PATA_HPT3X2N
543	tristate "HPT 371N/372N/302N PATA support"
544	depends on PCI
545	help
546	  This option enables support for the N variant HPT PATA
547	  controllers via the new ATA layer.
548
549	  If unsure, say N.
550
551config PATA_HPT3X3
552	tristate "HPT 343/363 PATA support"
553	depends on PCI
554	help
555	  This option enables support for the HPT 343/363
556	  PATA controllers via the new ATA layer
557
558	  If unsure, say N.
559
560config PATA_HPT3X3_DMA
561	bool "HPT 343/363 DMA support"
562	depends on PATA_HPT3X3
563	help
564	  This option enables DMA support for the HPT343/363
565	  controllers. Enable with care as there are still some
566	  problems with DMA on this chipset.
567
568config PATA_ICSIDE
569	tristate "Acorn ICS PATA support"
570	depends on ARM && ARCH_ACORN
571	help
572	  On Acorn systems, say Y here if you wish to use the ICS PATA
573	  interface card.  This is not required for ICS partition support.
574	  If you are unsure, say N to this.
575
576config PATA_IMX
577	tristate "PATA support for Freescale iMX"
578	depends on ARCH_MXC
579	help
580	  This option enables support for the PATA host available on Freescale
581          iMX SoCs.
582
583	  If unsure, say N.
584
585config PATA_IT8213
586	tristate "IT8213 PATA support (Experimental)"
587	depends on PCI
588	help
589	  This option enables support for the ITE 821 PATA
590          controllers via the new ATA layer.
591
592	  If unsure, say N.
593
594config PATA_IT821X
595	tristate "IT8211/2 PATA support"
596	depends on PCI
597	help
598	  This option enables support for the ITE 8211 and 8212
599	  PATA controllers via the new ATA layer, including RAID
600	  mode.
601
602	  If unsure, say N.
603
604config PATA_JMICRON
605	tristate "JMicron PATA support"
606	depends on PCI
607	help
608	  Enable support for the JMicron IDE controller, via the new
609	  ATA layer.
610
611	  If unsure, say N.
612
613config PATA_MACIO
614	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
615	depends on PPC_PMAC
616	help
617	  Most IDE capable PowerMacs have IDE busses driven by a variant
618          of this controller which is part of the Apple chipset used on
619          most PowerMac models. Some models have multiple busses using
620          different chipsets, though generally, MacIO is one of them.
621
622config PATA_MARVELL
623	tristate "Marvell PATA support via legacy mode"
624	depends on PCI
625	help
626	  This option enables limited support for the Marvell 88SE61xx ATA
627	  controllers. If you wish to use only the SATA ports then select
628	  the AHCI driver alone. If you wish to the use the PATA port or
629	  both SATA and PATA include this driver.
630
631	  If unsure, say N.
632
633config PATA_MPC52xx
634	tristate "Freescale MPC52xx SoC internal IDE"
635	depends on PPC_MPC52xx && PPC_BESTCOMM
636	select PPC_BESTCOMM_ATA
637	help
638	  This option enables support for integrated IDE controller
639	  of the Freescale MPC52xx SoC.
640
641	  If unsure, say N.
642
643config PATA_NETCELL
644	tristate "NETCELL Revolution RAID support"
645	depends on PCI
646	help
647	  This option enables support for the Netcell Revolution RAID
648	  PATA controller.
649
650	  If unsure, say N.
651
652config PATA_NINJA32
653	tristate "Ninja32/Delkin Cardbus ATA support"
654	depends on PCI
655	help
656	  This option enables support for the Ninja32, Delkin and
657	  possibly other brands of Cardbus ATA adapter
658
659	  If unsure, say N.
660
661config PATA_NS87415
662	tristate "Nat Semi NS87415 PATA support"
663	depends on PCI
664	help
665	  This option enables support for the National Semiconductor
666	  NS87415 PCI-IDE controller.
667
668	  If unsure, say N.
669
670config PATA_OLDPIIX
671	tristate "Intel PATA old PIIX support"
672	depends on PCI
673	help
674	  This option enables support for early PIIX PATA support.
675
676	  If unsure, say N.
677
678config PATA_OPTIDMA
679	tristate "OPTI FireStar PATA support (Very Experimental)"
680	depends on PCI
681	help
682	  This option enables DMA/PIO support for the later OPTi
683	  controllers found on some old motherboards and in some
684	  laptops.
685
686	  If unsure, say N.
687
688config PATA_PDC2027X
689	tristate "Promise PATA 2027x support"
690	depends on PCI
691	help
692	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
693
694	  If unsure, say N.
695
696config PATA_PDC_OLD
697	tristate "Older Promise PATA controller support"
698	depends on PCI
699	help
700	  This option enables support for the Promise 20246, 20262, 20263,
701	  20265 and 20267 adapters.
702
703	  If unsure, say N.
704
705config PATA_RADISYS
706	tristate "RADISYS 82600 PATA support (Experimental)"
707	depends on PCI
708	help
709	  This option enables support for the RADISYS 82600
710	  PATA controllers via the new ATA layer
711
712	  If unsure, say N.
713
714config PATA_RDC
715	tristate "RDC PATA support"
716	depends on PCI
717	help
718	  This option enables basic support for the later RDC PATA controllers
719	  controllers via the new ATA layer. For the RDC 1010, you need to
720	  enable the IT821X driver instead.
721
722	  If unsure, say N.
723
724config PATA_SC1200
725	tristate "SC1200 PATA support"
726	depends on PCI && (X86_32 || COMPILE_TEST)
727	help
728	  This option enables support for the NatSemi/AMD SC1200 SoC
729	  companion chip used with the Geode processor family.
730
731	  If unsure, say N.
732
733config PATA_SCH
734	tristate "Intel SCH PATA support"
735	depends on PCI
736	help
737	  This option enables support for Intel SCH PATA on the Intel
738	  SCH (US15W, US15L, UL11L) series host controllers.
739
740	  If unsure, say N.
741
742config PATA_SERVERWORKS
743	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
744	depends on PCI
745	help
746	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
747	  HT1000 PATA controllers, via the new ATA layer.
748
749	  If unsure, say N.
750
751config PATA_SIL680
752	tristate "CMD / Silicon Image 680 PATA support"
753	depends on PCI
754	help
755	  This option enables support for CMD / Silicon Image 680 PATA.
756
757	  If unsure, say N.
758
759config PATA_SIS
760	tristate "SiS PATA support"
761	depends on PCI
762	help
763	  This option enables support for SiS PATA controllers
764
765	  If unsure, say N.
766
767config PATA_TOSHIBA
768	tristate "Toshiba Piccolo support (Experimental)"
769	depends on PCI
770	help
771	  Support for the Toshiba Piccolo controllers. Currently only the
772	  primary channel is supported by this driver.
773
774	  If unsure, say N.
775
776config PATA_TRIFLEX
777	tristate "Compaq Triflex PATA support"
778	depends on PCI
779	help
780	  Enable support for the Compaq 'Triflex' IDE controller as found
781	  on many Compaq Pentium-Pro systems, via the new ATA layer.
782
783	  If unsure, say N.
784
785config PATA_VIA
786	tristate "VIA PATA support"
787	depends on PCI
788	help
789	  This option enables support for the VIA PATA interfaces
790	  found on the many VIA chipsets.
791
792	  If unsure, say N.
793
794config PATA_PXA
795	tristate "PXA DMA-capable PATA support"
796	depends on ARCH_PXA
797	help
798	  This option enables support for harddrive attached to PXA CPU's bus.
799
800	  NOTE: This driver utilizes PXA DMA controller, in case your hardware
801	        is not capable of doing MWDMA, use pata_platform instead.
802
803	  If unsure, say N.
804
805config PATA_WINBOND
806	tristate "Winbond SL82C105 PATA support"
807	depends on PCI
808	help
809	  This option enables support for SL82C105 PATA devices found in the
810	  Netwinder and some other systems
811
812	  If unsure, say N.
813
814endif # ATA_BMDMA
815
816comment "PIO-only SFF controllers"
817
818config PATA_AT32
819	tristate "Atmel AVR32 PATA support (Experimental)"
820	depends on AVR32 && PLATFORM_AT32AP
821	help
822	  This option enables support for the IDE devices on the
823	  Atmel AT32AP platform.
824
825	  If unsure, say N.
826
827config PATA_AT91
828	tristate "PATA support for AT91SAM9260"
829	depends on ARM && SOC_AT91SAM9
830	depends on !ARCH_MULTIPLATFORM
831	help
832	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
833
834	  If unsure, say N.
835
836config PATA_CMD640_PCI
837	tristate "CMD640 PCI PATA support (Experimental)"
838	depends on PCI
839	help
840	  This option enables support for the CMD640 PCI IDE
841	  interface chip. Only the primary channel is currently
842	  supported.
843
844	  If unsure, say N.
845
846config PATA_ISAPNP
847	tristate "ISA Plug and Play PATA support"
848	depends on ISAPNP
849	help
850	  This option enables support for ISA plug & play ATA
851	  controllers such as those found on old soundcards.
852
853	  If unsure, say N.
854
855config PATA_IXP4XX_CF
856	tristate "IXP4XX Compact Flash support"
857	depends on ARCH_IXP4XX
858	help
859	  This option enables support for a Compact Flash connected on
860	  the ixp4xx expansion bus. This driver had been written for
861	  Loft/Avila boards in mind but can work with others.
862
863	  If unsure, say N.
864
865config PATA_MPIIX
866	tristate "Intel PATA MPIIX support"
867	depends on PCI
868	help
869	  This option enables support for MPIIX PATA support.
870
871	  If unsure, say N.
872
873config PATA_NS87410
874	tristate "Nat Semi NS87410 PATA support"
875	depends on PCI
876	help
877	  This option enables support for the National Semiconductor
878	  NS87410 PCI-IDE controller.
879
880	  If unsure, say N.
881
882config PATA_OPTI
883	tristate "OPTI621/6215 PATA support (Very Experimental)"
884	depends on PCI
885	help
886	  This option enables full PIO support for the early Opti ATA
887	  controllers found on some old motherboards.
888
889	  If unsure, say N.
890
891config PATA_PALMLD
892	tristate "Palm LifeDrive PATA support"
893	depends on MACH_PALMLD
894	help
895	  This option enables support for Palm LifeDrive's internal ATA
896	  port via the new ATA layer.
897
898	  If unsure, say N.
899
900config PATA_PCMCIA
901	tristate "PCMCIA PATA support"
902	depends on PCMCIA
903	help
904	  This option enables support for PCMCIA ATA interfaces, including
905	  compact flash card adapters via the new ATA layer.
906
907	  If unsure, say N.
908
909config PATA_PLATFORM
910	tristate "Generic platform device PATA support"
911	depends on EXPERT || PPC || HAVE_PATA_PLATFORM
912	help
913	  This option enables support for generic directly connected ATA
914	  devices commonly found on embedded systems.
915
916	  If unsure, say N.
917
918config PATA_OF_PLATFORM
919	tristate "OpenFirmware platform device PATA support"
920	depends on PATA_PLATFORM && OF
921	help
922	  This option enables support for generic directly connected ATA
923	  devices commonly found on embedded systems with OpenFirmware
924	  bindings.
925
926	  If unsure, say N.
927
928config PATA_QDI
929	tristate "QDI VLB PATA support"
930	depends on ISA
931	select PATA_LEGACY
932	help
933	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
934
935config PATA_RB532
936	tristate "RouterBoard 532 PATA CompactFlash support"
937	depends on MIKROTIK_RB532
938	help
939	  This option enables support for the RouterBoard 532
940	  PATA CompactFlash controller.
941
942	  If unsure, say N.
943
944config PATA_RZ1000
945	tristate "PC Tech RZ1000 PATA support"
946	depends on PCI
947	help
948	  This option enables basic support for the PC Tech RZ1000/1
949	  PATA controllers via the new ATA layer
950
951	  If unsure, say N.
952
953config PATA_SAMSUNG_CF
954	tristate "Samsung SoC PATA support"
955	depends on SAMSUNG_DEV_IDE
956	help
957	  This option enables basic support for Samsung's S3C/S5P board
958	  PATA controllers via the new ATA layer
959
960	  If unsure, say N.
961
962config PATA_WINBOND_VLB
963	tristate "Winbond W83759A VLB PATA support (Experimental)"
964	depends on ISA
965	select PATA_LEGACY
966	help
967	  Support for the Winbond W83759A controller on Vesa Local Bus
968	  systems.
969
970comment "Generic fallback / legacy drivers"
971
972config PATA_ACPI
973	tristate "ACPI firmware driver for PATA"
974	depends on ATA_ACPI && ATA_BMDMA
975	help
976	  This option enables an ACPI method driver which drives
977	  motherboard PATA controller interfaces through the ACPI
978	  firmware in the BIOS. This driver can sometimes handle
979	  otherwise unsupported hardware.
980
981config ATA_GENERIC
982	tristate "Generic ATA support"
983	depends on PCI && ATA_BMDMA
984	help
985	  This option enables support for generic BIOS configured
986	  ATA controllers via the new ATA layer
987
988	  If unsure, say N.
989
990config PATA_LEGACY
991	tristate "Legacy ISA PATA support (Experimental)"
992	depends on (ISA || PCI)
993	help
994	  This option enables support for ISA/VLB/PCI bus legacy PATA
995	  ports and allows them to be accessed via the new ATA layer.
996
997	  If unsure, say N.
998
999endif # ATA_SFF
1000endif # ATA
1001