1/*
2 * Copyright 2010 Tilera Corporation. All Rights Reserved.
3 *
4 *   This program is free software; you can redistribute it and/or
5 *   modify it under the terms of the GNU General Public License
6 *   as published by the Free Software Foundation, version 2.
7 *
8 *   This program is distributed in the hope that it will be useful, but
9 *   WITHOUT ANY WARRANTY; without even the implied warranty of
10 *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
11 *   NON INFRINGEMENT.  See the GNU General Public License for
12 *   more details.
13 */
14
15#include <linux/linkage.h>
16#include <asm/errno.h>
17#include <asm/cache.h>
18#include <arch/chip.h>
19
20/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
21
22/*
23 * strnlen_user_asm takes the pointer in r0, and the length bound in r1.
24 * It returns the length, including the terminating NUL, or zero on exception.
25 * If length is greater than the bound, returns one plus the bound.
26 */
27STD_ENTRY(strnlen_user_asm)
28	{ bz r1, 2f; addi r3, r0, -1 }  /* bias down to include NUL */
291:      { lb_u r4, r0; addi r1, r1, -1 }
30	bz r4, 2f
31	{ bnzt r1, 1b; addi r0, r0, 1 }
322:      { sub r0, r0, r3; jrp lr }
33	STD_ENDPROC(strnlen_user_asm)
34	.pushsection .fixup,"ax"
35strnlen_user_fault:
36	{ move r0, zero; jrp lr }
37	ENDPROC(strnlen_user_fault)
38	.section __ex_table,"a"
39	.align 4
40	.word 1b, strnlen_user_fault
41	.popsection
42
43/*
44 * strncpy_from_user_asm takes the kernel target pointer in r0,
45 * the userspace source pointer in r1, and the length bound (including
46 * the trailing NUL) in r2.  On success, it returns the string length
47 * (not including the trailing NUL), or -EFAULT on failure.
48 */
49STD_ENTRY(strncpy_from_user_asm)
50	{ bz r2, 2f; move r3, r0 }
511:	{ lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
52	{ sb r0, r4; addi r0, r0, 1 }
53	bz r4, 2f
54	bnzt r2, 1b
55	{ sub r0, r0, r3; jrp lr }
562:	addi r0, r0, -1   /* don't count the trailing NUL */
57	{ sub r0, r0, r3; jrp lr }
58	STD_ENDPROC(strncpy_from_user_asm)
59	.pushsection .fixup,"ax"
60strncpy_from_user_fault:
61	{ movei r0, -EFAULT; jrp lr }
62	ENDPROC(strncpy_from_user_fault)
63	.section __ex_table,"a"
64	.align 4
65	.word 1b, strncpy_from_user_fault
66	.popsection
67
68/*
69 * clear_user_asm takes the user target address in r0 and the
70 * number of bytes to zero in r1.
71 * It returns the number of uncopiable bytes (hopefully zero) in r0.
72 * Note that we don't use a separate .fixup section here since we fall
73 * through into the "fixup" code as the last straight-line bundle anyway.
74 */
75STD_ENTRY(clear_user_asm)
76	{ bz r1, 2f; or r2, r0, r1 }
77	andi r2, r2, 3
78	bzt r2, .Lclear_aligned_user_asm
791:      { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 }
80	bnzt r1, 1b
812:      { move r0, r1; jrp lr }
82	.pushsection __ex_table,"a"
83	.align 4
84	.word 1b, 2b
85	.popsection
86
87.Lclear_aligned_user_asm:
881:      { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 }
89	bnzt r1, 1b
902:      { move r0, r1; jrp lr }
91	STD_ENDPROC(clear_user_asm)
92	.pushsection __ex_table,"a"
93	.align 4
94	.word 1b, 2b
95	.popsection
96
97/*
98 * flush_user_asm takes the user target address in r0 and the
99 * number of bytes to flush in r1.
100 * It returns the number of unflushable bytes (hopefully zero) in r0.
101 */
102STD_ENTRY(flush_user_asm)
103	bz r1, 2f
104	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
105	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
106	{ and r0, r0, r2; and r1, r1, r2 }
107	{ sub r1, r1, r0 }
1081:      { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() }
109	{ addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b }
1102:      { move r0, r1; jrp lr }
111	STD_ENDPROC(flush_user_asm)
112	.pushsection __ex_table,"a"
113	.align 4
114	.word 1b, 2b
115	.popsection
116
117/*
118 * finv_user_asm takes the user target address in r0 and the
119 * number of bytes to flush-invalidate in r1.
120 * It returns the number of not finv'able bytes (hopefully zero) in r0.
121 */
122STD_ENTRY(finv_user_asm)
123	bz r1, 2f
124	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
125	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
126	{ and r0, r0, r2; and r1, r1, r2 }
127	{ sub r1, r1, r0 }
1281:      { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() }
129	{ addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b }
1302:      { move r0, r1; jrp lr }
131	STD_ENDPROC(finv_user_asm)
132	.pushsection __ex_table,"a"
133	.align 4
134	.word 1b, 2b
135	.popsection
136