1/* 2 * General Purpose functions for the global management of the 3 * Communication Processor Module. 4 * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) 5 * 6 * In addition to the individual control of the communication 7 * channels, there are a few functions that globally affect the 8 * communication processor. 9 * 10 * Buffer descriptors must be allocated from the dual ported memory 11 * space. The allocator for that is here. When the communication 12 * process is reset, we reclaim the memory available. There is 13 * currently no deallocator for this memory. 14 * The amount of space available is platform dependent. On the 15 * MBX, the EPPC software loads additional microcode into the 16 * communication processor, and uses some of the DP ram for this 17 * purpose. Current, the first 512 bytes and the last 256 bytes of 18 * memory are used. Right now I am conservative and only use the 19 * memory that can never be used for microcode. If there are 20 * applications that require more DP ram, we can expand the boundaries 21 * but then we have to be careful of any downloaded microcode. 22 */ 23#include <linux/errno.h> 24#include <linux/sched.h> 25#include <linux/kernel.h> 26#include <linux/dma-mapping.h> 27#include <linux/param.h> 28#include <linux/string.h> 29#include <linux/mm.h> 30#include <linux/interrupt.h> 31#include <linux/irq.h> 32#include <linux/module.h> 33#include <linux/spinlock.h> 34#include <linux/slab.h> 35#include <asm/page.h> 36#include <asm/pgtable.h> 37#include <asm/8xx_immap.h> 38#include <asm/cpm1.h> 39#include <asm/io.h> 40#include <asm/tlbflush.h> 41#include <asm/rheap.h> 42#include <asm/prom.h> 43#include <asm/cpm.h> 44 45#include <asm/fs_pd.h> 46 47#ifdef CONFIG_8xx_GPIO 48#include <linux/of_gpio.h> 49#endif 50 51#define CPM_MAP_SIZE (0x4000) 52 53cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ 54immap_t __iomem *mpc8xx_immr; 55static cpic8xx_t __iomem *cpic_reg; 56 57static struct irq_domain *cpm_pic_host; 58 59static void cpm_mask_irq(struct irq_data *d) 60{ 61 unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); 62 63 clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); 64} 65 66static void cpm_unmask_irq(struct irq_data *d) 67{ 68 unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); 69 70 setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec)); 71} 72 73static void cpm_end_irq(struct irq_data *d) 74{ 75 unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d); 76 77 out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec)); 78} 79 80static struct irq_chip cpm_pic = { 81 .name = "CPM PIC", 82 .irq_mask = cpm_mask_irq, 83 .irq_unmask = cpm_unmask_irq, 84 .irq_eoi = cpm_end_irq, 85}; 86 87int cpm_get_irq(void) 88{ 89 int cpm_vec; 90 91 /* Get the vector by setting the ACK bit and then reading 92 * the register. 93 */ 94 out_be16(&cpic_reg->cpic_civr, 1); 95 cpm_vec = in_be16(&cpic_reg->cpic_civr); 96 cpm_vec >>= 11; 97 98 return irq_linear_revmap(cpm_pic_host, cpm_vec); 99} 100 101static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq, 102 irq_hw_number_t hw) 103{ 104 pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw); 105 106 irq_set_status_flags(virq, IRQ_LEVEL); 107 irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq); 108 return 0; 109} 110 111/* The CPM can generate the error interrupt when there is a race condition 112 * between generating and masking interrupts. All we have to do is ACK it 113 * and return. This is a no-op function so we don't need any special 114 * tests in the interrupt handler. 115 */ 116static irqreturn_t cpm_error_interrupt(int irq, void *dev) 117{ 118 return IRQ_HANDLED; 119} 120 121static struct irqaction cpm_error_irqaction = { 122 .handler = cpm_error_interrupt, 123 .flags = IRQF_NO_THREAD, 124 .name = "error", 125}; 126 127static const struct irq_domain_ops cpm_pic_host_ops = { 128 .map = cpm_pic_host_map, 129}; 130 131unsigned int cpm_pic_init(void) 132{ 133 struct device_node *np = NULL; 134 struct resource res; 135 unsigned int sirq = NO_IRQ, hwirq, eirq; 136 int ret; 137 138 pr_debug("cpm_pic_init\n"); 139 140 np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic"); 141 if (np == NULL) 142 np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); 143 if (np == NULL) { 144 printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); 145 return sirq; 146 } 147 148 ret = of_address_to_resource(np, 0, &res); 149 if (ret) 150 goto end; 151 152 cpic_reg = ioremap(res.start, resource_size(&res)); 153 if (cpic_reg == NULL) 154 goto end; 155 156 sirq = irq_of_parse_and_map(np, 0); 157 if (sirq == NO_IRQ) 158 goto end; 159 160 /* Initialize the CPM interrupt controller. */ 161 hwirq = (unsigned int)virq_to_hw(sirq); 162 out_be32(&cpic_reg->cpic_cicr, 163 (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | 164 ((hwirq/2) << 13) | CICR_HP_MASK); 165 166 out_be32(&cpic_reg->cpic_cimr, 0); 167 168 cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL); 169 if (cpm_pic_host == NULL) { 170 printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); 171 sirq = NO_IRQ; 172 goto end; 173 } 174 175 /* Install our own error handler. */ 176 np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); 177 if (np == NULL) 178 np = of_find_node_by_type(NULL, "cpm"); 179 if (np == NULL) { 180 printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); 181 goto end; 182 } 183 184 eirq = irq_of_parse_and_map(np, 0); 185 if (eirq == NO_IRQ) 186 goto end; 187 188 if (setup_irq(eirq, &cpm_error_irqaction)) 189 printk(KERN_ERR "Could not allocate CPM error IRQ!"); 190 191 setbits32(&cpic_reg->cpic_cicr, CICR_IEN); 192 193end: 194 of_node_put(np); 195 return sirq; 196} 197 198void __init cpm_reset(void) 199{ 200 sysconf8xx_t __iomem *siu_conf; 201 202 mpc8xx_immr = ioremap(get_immrbase(), 0x4000); 203 if (!mpc8xx_immr) { 204 printk(KERN_CRIT "Could not map IMMR\n"); 205 return; 206 } 207 208 cpmp = &mpc8xx_immr->im_cpm; 209 210#ifndef CONFIG_PPC_EARLY_DEBUG_CPM 211 /* Perform a reset. 212 */ 213 out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); 214 215 /* Wait for it. 216 */ 217 while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG); 218#endif 219 220#ifdef CONFIG_UCODE_PATCH 221 cpm_load_patch(cpmp); 222#endif 223 224 /* Set SDMA Bus Request priority 5. 225 * On 860T, this also enables FEC priority 6. I am not sure 226 * this is what we really want for some applications, but the 227 * manual recommends it. 228 * Bit 25, FAM can also be set to use FEC aggressive mode (860T). 229 */ 230 siu_conf = immr_map(im_siu_conf); 231 out_be32(&siu_conf->sc_sdcr, 1); 232 immr_unmap(siu_conf); 233 234 cpm_muram_init(); 235} 236 237static DEFINE_SPINLOCK(cmd_lock); 238 239#define MAX_CR_CMD_LOOPS 10000 240 241int cpm_command(u32 command, u8 opcode) 242{ 243 int i, ret; 244 unsigned long flags; 245 246 if (command & 0xffffff0f) 247 return -EINVAL; 248 249 spin_lock_irqsave(&cmd_lock, flags); 250 251 ret = 0; 252 out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8)); 253 for (i = 0; i < MAX_CR_CMD_LOOPS; i++) 254 if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) 255 goto out; 256 257 printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); 258 ret = -EIO; 259out: 260 spin_unlock_irqrestore(&cmd_lock, flags); 261 return ret; 262} 263EXPORT_SYMBOL(cpm_command); 264 265/* Set a baud rate generator. This needs lots of work. There are 266 * four BRGs, any of which can be wired to any channel. 267 * The internal baud rate clock is the system clock divided by 16. 268 * This assumes the baudrate is 16x oversampled by the uart. 269 */ 270#define BRG_INT_CLK (get_brgfreq()) 271#define BRG_UART_CLK (BRG_INT_CLK/16) 272#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16) 273 274void 275cpm_setbrg(uint brg, uint rate) 276{ 277 u32 __iomem *bp; 278 279 /* This is good enough to get SMCs running..... 280 */ 281 bp = &cpmp->cp_brgc1; 282 bp += brg; 283 /* The BRG has a 12-bit counter. For really slow baud rates (or 284 * really fast processors), we may have to further divide by 16. 285 */ 286 if (((BRG_UART_CLK / rate) - 1) < 4096) 287 out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); 288 else 289 out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | 290 CPM_BRG_EN | CPM_BRG_DIV16); 291} 292 293struct cpm_ioport16 { 294 __be16 dir, par, odr_sor, dat, intr; 295 __be16 res[3]; 296}; 297 298struct cpm_ioport32b { 299 __be32 dir, par, odr, dat; 300}; 301 302struct cpm_ioport32e { 303 __be32 dir, par, sor, odr, dat; 304}; 305 306static void cpm1_set_pin32(int port, int pin, int flags) 307{ 308 struct cpm_ioport32e __iomem *iop; 309 pin = 1 << (31 - pin); 310 311 if (port == CPM_PORTB) 312 iop = (struct cpm_ioport32e __iomem *) 313 &mpc8xx_immr->im_cpm.cp_pbdir; 314 else 315 iop = (struct cpm_ioport32e __iomem *) 316 &mpc8xx_immr->im_cpm.cp_pedir; 317 318 if (flags & CPM_PIN_OUTPUT) 319 setbits32(&iop->dir, pin); 320 else 321 clrbits32(&iop->dir, pin); 322 323 if (!(flags & CPM_PIN_GPIO)) 324 setbits32(&iop->par, pin); 325 else 326 clrbits32(&iop->par, pin); 327 328 if (port == CPM_PORTB) { 329 if (flags & CPM_PIN_OPENDRAIN) 330 setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin); 331 else 332 clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin); 333 } 334 335 if (port == CPM_PORTE) { 336 if (flags & CPM_PIN_SECONDARY) 337 setbits32(&iop->sor, pin); 338 else 339 clrbits32(&iop->sor, pin); 340 341 if (flags & CPM_PIN_OPENDRAIN) 342 setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); 343 else 344 clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); 345 } 346} 347 348static void cpm1_set_pin16(int port, int pin, int flags) 349{ 350 struct cpm_ioport16 __iomem *iop = 351 (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport; 352 353 pin = 1 << (15 - pin); 354 355 if (port != 0) 356 iop += port - 1; 357 358 if (flags & CPM_PIN_OUTPUT) 359 setbits16(&iop->dir, pin); 360 else 361 clrbits16(&iop->dir, pin); 362 363 if (!(flags & CPM_PIN_GPIO)) 364 setbits16(&iop->par, pin); 365 else 366 clrbits16(&iop->par, pin); 367 368 if (port == CPM_PORTA) { 369 if (flags & CPM_PIN_OPENDRAIN) 370 setbits16(&iop->odr_sor, pin); 371 else 372 clrbits16(&iop->odr_sor, pin); 373 } 374 if (port == CPM_PORTC) { 375 if (flags & CPM_PIN_SECONDARY) 376 setbits16(&iop->odr_sor, pin); 377 else 378 clrbits16(&iop->odr_sor, pin); 379 } 380} 381 382void cpm1_set_pin(enum cpm_port port, int pin, int flags) 383{ 384 if (port == CPM_PORTB || port == CPM_PORTE) 385 cpm1_set_pin32(port, pin, flags); 386 else 387 cpm1_set_pin16(port, pin, flags); 388} 389 390int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) 391{ 392 int shift; 393 int i, bits = 0; 394 u32 __iomem *reg; 395 u32 mask = 7; 396 397 u8 clk_map[][3] = { 398 {CPM_CLK_SCC1, CPM_BRG1, 0}, 399 {CPM_CLK_SCC1, CPM_BRG2, 1}, 400 {CPM_CLK_SCC1, CPM_BRG3, 2}, 401 {CPM_CLK_SCC1, CPM_BRG4, 3}, 402 {CPM_CLK_SCC1, CPM_CLK1, 4}, 403 {CPM_CLK_SCC1, CPM_CLK2, 5}, 404 {CPM_CLK_SCC1, CPM_CLK3, 6}, 405 {CPM_CLK_SCC1, CPM_CLK4, 7}, 406 407 {CPM_CLK_SCC2, CPM_BRG1, 0}, 408 {CPM_CLK_SCC2, CPM_BRG2, 1}, 409 {CPM_CLK_SCC2, CPM_BRG3, 2}, 410 {CPM_CLK_SCC2, CPM_BRG4, 3}, 411 {CPM_CLK_SCC2, CPM_CLK1, 4}, 412 {CPM_CLK_SCC2, CPM_CLK2, 5}, 413 {CPM_CLK_SCC2, CPM_CLK3, 6}, 414 {CPM_CLK_SCC2, CPM_CLK4, 7}, 415 416 {CPM_CLK_SCC3, CPM_BRG1, 0}, 417 {CPM_CLK_SCC3, CPM_BRG2, 1}, 418 {CPM_CLK_SCC3, CPM_BRG3, 2}, 419 {CPM_CLK_SCC3, CPM_BRG4, 3}, 420 {CPM_CLK_SCC3, CPM_CLK5, 4}, 421 {CPM_CLK_SCC3, CPM_CLK6, 5}, 422 {CPM_CLK_SCC3, CPM_CLK7, 6}, 423 {CPM_CLK_SCC3, CPM_CLK8, 7}, 424 425 {CPM_CLK_SCC4, CPM_BRG1, 0}, 426 {CPM_CLK_SCC4, CPM_BRG2, 1}, 427 {CPM_CLK_SCC4, CPM_BRG3, 2}, 428 {CPM_CLK_SCC4, CPM_BRG4, 3}, 429 {CPM_CLK_SCC4, CPM_CLK5, 4}, 430 {CPM_CLK_SCC4, CPM_CLK6, 5}, 431 {CPM_CLK_SCC4, CPM_CLK7, 6}, 432 {CPM_CLK_SCC4, CPM_CLK8, 7}, 433 434 {CPM_CLK_SMC1, CPM_BRG1, 0}, 435 {CPM_CLK_SMC1, CPM_BRG2, 1}, 436 {CPM_CLK_SMC1, CPM_BRG3, 2}, 437 {CPM_CLK_SMC1, CPM_BRG4, 3}, 438 {CPM_CLK_SMC1, CPM_CLK1, 4}, 439 {CPM_CLK_SMC1, CPM_CLK2, 5}, 440 {CPM_CLK_SMC1, CPM_CLK3, 6}, 441 {CPM_CLK_SMC1, CPM_CLK4, 7}, 442 443 {CPM_CLK_SMC2, CPM_BRG1, 0}, 444 {CPM_CLK_SMC2, CPM_BRG2, 1}, 445 {CPM_CLK_SMC2, CPM_BRG3, 2}, 446 {CPM_CLK_SMC2, CPM_BRG4, 3}, 447 {CPM_CLK_SMC2, CPM_CLK5, 4}, 448 {CPM_CLK_SMC2, CPM_CLK6, 5}, 449 {CPM_CLK_SMC2, CPM_CLK7, 6}, 450 {CPM_CLK_SMC2, CPM_CLK8, 7}, 451 }; 452 453 switch (target) { 454 case CPM_CLK_SCC1: 455 reg = &mpc8xx_immr->im_cpm.cp_sicr; 456 shift = 0; 457 break; 458 459 case CPM_CLK_SCC2: 460 reg = &mpc8xx_immr->im_cpm.cp_sicr; 461 shift = 8; 462 break; 463 464 case CPM_CLK_SCC3: 465 reg = &mpc8xx_immr->im_cpm.cp_sicr; 466 shift = 16; 467 break; 468 469 case CPM_CLK_SCC4: 470 reg = &mpc8xx_immr->im_cpm.cp_sicr; 471 shift = 24; 472 break; 473 474 case CPM_CLK_SMC1: 475 reg = &mpc8xx_immr->im_cpm.cp_simode; 476 shift = 12; 477 break; 478 479 case CPM_CLK_SMC2: 480 reg = &mpc8xx_immr->im_cpm.cp_simode; 481 shift = 28; 482 break; 483 484 default: 485 printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n"); 486 return -EINVAL; 487 } 488 489 for (i = 0; i < ARRAY_SIZE(clk_map); i++) { 490 if (clk_map[i][0] == target && clk_map[i][1] == clock) { 491 bits = clk_map[i][2]; 492 break; 493 } 494 } 495 496 if (i == ARRAY_SIZE(clk_map)) { 497 printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n"); 498 return -EINVAL; 499 } 500 501 bits <<= shift; 502 mask <<= shift; 503 504 if (reg == &mpc8xx_immr->im_cpm.cp_sicr) { 505 if (mode == CPM_CLK_RTX) { 506 bits |= bits << 3; 507 mask |= mask << 3; 508 } else if (mode == CPM_CLK_RX) { 509 bits <<= 3; 510 mask <<= 3; 511 } 512 } 513 514 out_be32(reg, (in_be32(reg) & ~mask) | bits); 515 516 return 0; 517} 518 519/* 520 * GPIO LIB API implementation 521 */ 522#ifdef CONFIG_8xx_GPIO 523 524struct cpm1_gpio16_chip { 525 struct of_mm_gpio_chip mm_gc; 526 spinlock_t lock; 527 528 /* shadowed data register to clear/set bits safely */ 529 u16 cpdata; 530}; 531 532static inline struct cpm1_gpio16_chip * 533to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) 534{ 535 return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); 536} 537 538static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) 539{ 540 struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); 541 struct cpm_ioport16 __iomem *iop = mm_gc->regs; 542 543 cpm1_gc->cpdata = in_be16(&iop->dat); 544} 545 546static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) 547{ 548 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 549 struct cpm_ioport16 __iomem *iop = mm_gc->regs; 550 u16 pin_mask; 551 552 pin_mask = 1 << (15 - gpio); 553 554 return !!(in_be16(&iop->dat) & pin_mask); 555} 556 557static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask, 558 int value) 559{ 560 struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); 561 struct cpm_ioport16 __iomem *iop = mm_gc->regs; 562 563 if (value) 564 cpm1_gc->cpdata |= pin_mask; 565 else 566 cpm1_gc->cpdata &= ~pin_mask; 567 568 out_be16(&iop->dat, cpm1_gc->cpdata); 569} 570 571static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) 572{ 573 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 574 struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); 575 unsigned long flags; 576 u16 pin_mask = 1 << (15 - gpio); 577 578 spin_lock_irqsave(&cpm1_gc->lock, flags); 579 580 __cpm1_gpio16_set(mm_gc, pin_mask, value); 581 582 spin_unlock_irqrestore(&cpm1_gc->lock, flags); 583} 584 585static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) 586{ 587 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 588 struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); 589 struct cpm_ioport16 __iomem *iop = mm_gc->regs; 590 unsigned long flags; 591 u16 pin_mask = 1 << (15 - gpio); 592 593 spin_lock_irqsave(&cpm1_gc->lock, flags); 594 595 setbits16(&iop->dir, pin_mask); 596 __cpm1_gpio16_set(mm_gc, pin_mask, val); 597 598 spin_unlock_irqrestore(&cpm1_gc->lock, flags); 599 600 return 0; 601} 602 603static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) 604{ 605 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 606 struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); 607 struct cpm_ioport16 __iomem *iop = mm_gc->regs; 608 unsigned long flags; 609 u16 pin_mask = 1 << (15 - gpio); 610 611 spin_lock_irqsave(&cpm1_gc->lock, flags); 612 613 clrbits16(&iop->dir, pin_mask); 614 615 spin_unlock_irqrestore(&cpm1_gc->lock, flags); 616 617 return 0; 618} 619 620int cpm1_gpiochip_add16(struct device_node *np) 621{ 622 struct cpm1_gpio16_chip *cpm1_gc; 623 struct of_mm_gpio_chip *mm_gc; 624 struct gpio_chip *gc; 625 626 cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); 627 if (!cpm1_gc) 628 return -ENOMEM; 629 630 spin_lock_init(&cpm1_gc->lock); 631 632 mm_gc = &cpm1_gc->mm_gc; 633 gc = &mm_gc->gc; 634 635 mm_gc->save_regs = cpm1_gpio16_save_regs; 636 gc->ngpio = 16; 637 gc->direction_input = cpm1_gpio16_dir_in; 638 gc->direction_output = cpm1_gpio16_dir_out; 639 gc->get = cpm1_gpio16_get; 640 gc->set = cpm1_gpio16_set; 641 642 return of_mm_gpiochip_add(np, mm_gc); 643} 644 645struct cpm1_gpio32_chip { 646 struct of_mm_gpio_chip mm_gc; 647 spinlock_t lock; 648 649 /* shadowed data register to clear/set bits safely */ 650 u32 cpdata; 651}; 652 653static inline struct cpm1_gpio32_chip * 654to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) 655{ 656 return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); 657} 658 659static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) 660{ 661 struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); 662 struct cpm_ioport32b __iomem *iop = mm_gc->regs; 663 664 cpm1_gc->cpdata = in_be32(&iop->dat); 665} 666 667static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) 668{ 669 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 670 struct cpm_ioport32b __iomem *iop = mm_gc->regs; 671 u32 pin_mask; 672 673 pin_mask = 1 << (31 - gpio); 674 675 return !!(in_be32(&iop->dat) & pin_mask); 676} 677 678static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask, 679 int value) 680{ 681 struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); 682 struct cpm_ioport32b __iomem *iop = mm_gc->regs; 683 684 if (value) 685 cpm1_gc->cpdata |= pin_mask; 686 else 687 cpm1_gc->cpdata &= ~pin_mask; 688 689 out_be32(&iop->dat, cpm1_gc->cpdata); 690} 691 692static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) 693{ 694 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 695 struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); 696 unsigned long flags; 697 u32 pin_mask = 1 << (31 - gpio); 698 699 spin_lock_irqsave(&cpm1_gc->lock, flags); 700 701 __cpm1_gpio32_set(mm_gc, pin_mask, value); 702 703 spin_unlock_irqrestore(&cpm1_gc->lock, flags); 704} 705 706static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) 707{ 708 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 709 struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); 710 struct cpm_ioport32b __iomem *iop = mm_gc->regs; 711 unsigned long flags; 712 u32 pin_mask = 1 << (31 - gpio); 713 714 spin_lock_irqsave(&cpm1_gc->lock, flags); 715 716 setbits32(&iop->dir, pin_mask); 717 __cpm1_gpio32_set(mm_gc, pin_mask, val); 718 719 spin_unlock_irqrestore(&cpm1_gc->lock, flags); 720 721 return 0; 722} 723 724static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) 725{ 726 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); 727 struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); 728 struct cpm_ioport32b __iomem *iop = mm_gc->regs; 729 unsigned long flags; 730 u32 pin_mask = 1 << (31 - gpio); 731 732 spin_lock_irqsave(&cpm1_gc->lock, flags); 733 734 clrbits32(&iop->dir, pin_mask); 735 736 spin_unlock_irqrestore(&cpm1_gc->lock, flags); 737 738 return 0; 739} 740 741int cpm1_gpiochip_add32(struct device_node *np) 742{ 743 struct cpm1_gpio32_chip *cpm1_gc; 744 struct of_mm_gpio_chip *mm_gc; 745 struct gpio_chip *gc; 746 747 cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); 748 if (!cpm1_gc) 749 return -ENOMEM; 750 751 spin_lock_init(&cpm1_gc->lock); 752 753 mm_gc = &cpm1_gc->mm_gc; 754 gc = &mm_gc->gc; 755 756 mm_gc->save_regs = cpm1_gpio32_save_regs; 757 gc->ngpio = 32; 758 gc->direction_input = cpm1_gpio32_dir_in; 759 gc->direction_output = cpm1_gpio32_dir_out; 760 gc->get = cpm1_gpio32_get; 761 gc->set = cpm1_gpio32_set; 762 763 return of_mm_gpiochip_add(np, mm_gc); 764} 765 766static int cpm_init_par_io(void) 767{ 768 struct device_node *np; 769 770 for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") 771 cpm1_gpiochip_add16(np); 772 773 for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") 774 cpm1_gpiochip_add32(np); 775 776 for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") 777 cpm1_gpiochip_add16(np); 778 779 for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") 780 cpm1_gpiochip_add16(np); 781 782 /* Port E uses CPM2 layout */ 783 for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") 784 cpm2_gpiochip_add32(np); 785 return 0; 786} 787arch_initcall(cpm_init_par_io); 788 789#endif /* CONFIG_8xx_GPIO */ 790