1/*
2 * MPC8377E WLAN Device Tree Source
3 *
4 * Copyright 2007-2009 Freescale Semiconductor Inc.
5 * Copyright 2009 MontaVista Software, Inc.
6 *
7 * This program is free software; you can redistribute  it and/or modify it
8 * under  the terms of  the GNU General  Public License as published by the
9 * Free Software Foundation;  either version 2 of the  License, or (at your
10 * option) any later version.
11 */
12
13/dts-v1/;
14
15/ {
16	compatible = "fsl,mpc8377wlan";
17	#address-cells = <1>;
18	#size-cells = <1>;
19
20	aliases {
21		ethernet0 = &enet0;
22		ethernet1 = &enet1;
23		serial0 = &serial0;
24		serial1 = &serial1;
25		pci0 = &pci0;
26		pci1 = &pci1;
27		pci2 = &pci2;
28	};
29
30	cpus {
31		#address-cells = <1>;
32		#size-cells = <0>;
33
34		PowerPC,8377@0 {
35			device_type = "cpu";
36			reg = <0x0>;
37			d-cache-line-size = <32>;
38			i-cache-line-size = <32>;
39			d-cache-size = <32768>;
40			i-cache-size = <32768>;
41			timebase-frequency = <0>;
42			bus-frequency = <0>;
43			clock-frequency = <0>;
44		};
45	};
46
47	memory {
48		device_type = "memory";
49		reg = <0x00000000 0x20000000>;	// 512MB at 0
50	};
51
52	localbus@e0005000 {
53		#address-cells = <2>;
54		#size-cells = <1>;
55		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
56		reg = <0xe0005000 0x1000>;
57		interrupts = <77 0x8>;
58		interrupt-parent = <&ipic>;
59		ranges = <0x0 0x0 0xfc000000 0x04000000>;
60
61		flash@0,0 {
62			#address-cells = <1>;
63			#size-cells = <1>;
64			compatible = "cfi-flash";
65			reg = <0x0 0x0 0x4000000>;
66			bank-width = <2>;
67			device-width = <1>;
68
69			partition@0 {
70				reg = <0 0x80000>;
71				label = "u-boot";
72				read-only;
73			};
74
75			partition@a0000 {
76				reg = <0xa0000 0x300000>;
77				label = "kernel";
78			};
79
80			partition@3a0000 {
81				reg = <0x3a0000 0x3c60000>;
82				label = "rootfs";
83			};
84		};
85	};
86
87	immr@e0000000 {
88		#address-cells = <1>;
89		#size-cells = <1>;
90		device_type = "soc";
91		compatible = "simple-bus";
92		ranges = <0x0 0xe0000000 0x00100000>;
93		reg = <0xe0000000 0x00000200>;
94		bus-frequency = <0>;
95
96		wdt@200 {
97			device_type = "watchdog";
98			compatible = "mpc83xx_wdt";
99			reg = <0x200 0x100>;
100		};
101
102		gpio1: gpio-controller@c00 {
103			#gpio-cells = <2>;
104			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
105			reg = <0xc00 0x100>;
106			interrupts = <74 0x8>;
107			interrupt-parent = <&ipic>;
108			gpio-controller;
109		};
110
111		gpio2: gpio-controller@d00 {
112			#gpio-cells = <2>;
113			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
114			reg = <0xd00 0x100>;
115			interrupts = <75 0x8>;
116			interrupt-parent = <&ipic>;
117			gpio-controller;
118		};
119
120		sleep-nexus {
121			#address-cells = <1>;
122			#size-cells = <1>;
123			compatible = "simple-bus";
124			sleep = <&pmc 0x0c000000>;
125			ranges;
126
127			i2c@3000 {
128				#address-cells = <1>;
129				#size-cells = <0>;
130				cell-index = <0>;
131				compatible = "fsl-i2c";
132				reg = <0x3000 0x100>;
133				interrupts = <14 0x8>;
134				interrupt-parent = <&ipic>;
135				dfsrr;
136
137				at24@50 {
138					compatible = "at24,24c256";
139					reg = <0x50>;
140				};
141
142				rtc@68 {
143					compatible = "dallas,ds1339";
144					reg = <0x68>;
145				};
146			};
147
148			sdhci@2e000 {
149				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
150				reg = <0x2e000 0x1000>;
151				interrupts = <42 0x8>;
152				interrupt-parent = <&ipic>;
153				sdhci,wp-inverted;
154				clock-frequency = <133333333>;
155			};
156		};
157
158		i2c@3100 {
159			#address-cells = <1>;
160			#size-cells = <0>;
161			cell-index = <1>;
162			compatible = "fsl-i2c";
163			reg = <0x3100 0x100>;
164			interrupts = <15 0x8>;
165			interrupt-parent = <&ipic>;
166			dfsrr;
167		};
168
169		spi@7000 {
170			cell-index = <0>;
171			compatible = "fsl,spi";
172			reg = <0x7000 0x1000>;
173			interrupts = <16 0x8>;
174			interrupt-parent = <&ipic>;
175			mode = "cpu";
176		};
177
178		dma@82a8 {
179			#address-cells = <1>;
180			#size-cells = <1>;
181			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
182			reg = <0x82a8 4>;
183			ranges = <0 0x8100 0x1a8>;
184			interrupt-parent = <&ipic>;
185			interrupts = <71 8>;
186			cell-index = <0>;
187			dma-channel@0 {
188				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
189				reg = <0 0x80>;
190				cell-index = <0>;
191				interrupt-parent = <&ipic>;
192				interrupts = <71 8>;
193			};
194			dma-channel@80 {
195				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
196				reg = <0x80 0x80>;
197				cell-index = <1>;
198				interrupt-parent = <&ipic>;
199				interrupts = <71 8>;
200			};
201			dma-channel@100 {
202				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
203				reg = <0x100 0x80>;
204				cell-index = <2>;
205				interrupt-parent = <&ipic>;
206				interrupts = <71 8>;
207			};
208			dma-channel@180 {
209				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
210				reg = <0x180 0x28>;
211				cell-index = <3>;
212				interrupt-parent = <&ipic>;
213				interrupts = <71 8>;
214			};
215		};
216
217		usb@23000 {
218			compatible = "fsl-usb2-dr";
219			reg = <0x23000 0x1000>;
220			#address-cells = <1>;
221			#size-cells = <0>;
222			interrupt-parent = <&ipic>;
223			interrupts = <38 0x8>;
224			phy_type = "ulpi";
225			sleep = <&pmc 0x00c00000>;
226		};
227
228		enet0: ethernet@24000 {
229			#address-cells = <1>;
230			#size-cells = <1>;
231			cell-index = <0>;
232			device_type = "network";
233			model = "eTSEC";
234			compatible = "gianfar";
235			reg = <0x24000 0x1000>;
236			ranges = <0x0 0x24000 0x1000>;
237			local-mac-address = [ 00 00 00 00 00 00 ];
238			interrupts = <32 0x8 33 0x8 34 0x8>;
239			phy-connection-type = "mii";
240			interrupt-parent = <&ipic>;
241			tbi-handle = <&tbi0>;
242			phy-handle = <&phy2>;
243			sleep = <&pmc 0xc0000000>;
244			fsl,magic-packet;
245
246			mdio@520 {
247				#address-cells = <1>;
248				#size-cells = <0>;
249				compatible = "fsl,gianfar-mdio";
250				reg = <0x520 0x20>;
251
252				phy2: ethernet-phy@2 {
253					interrupt-parent = <&ipic>;
254					interrupts = <17 0x8>;
255					reg = <0x2>;
256				};
257
258				phy3: ethernet-phy@3 {
259					interrupt-parent = <&ipic>;
260					interrupts = <18 0x8>;
261					reg = <0x3>;
262				};
263
264				tbi0: tbi-phy@11 {
265					reg = <0x11>;
266					device_type = "tbi-phy";
267				};
268			};
269		};
270
271		enet1: ethernet@25000 {
272			#address-cells = <1>;
273			#size-cells = <1>;
274			cell-index = <1>;
275			device_type = "network";
276			model = "eTSEC";
277			compatible = "gianfar";
278			reg = <0x25000 0x1000>;
279			ranges = <0x0 0x25000 0x1000>;
280			local-mac-address = [ 00 00 00 00 00 00 ];
281			interrupts = <35 0x8 36 0x8 37 0x8>;
282			phy-connection-type = "mii";
283			interrupt-parent = <&ipic>;
284			phy-handle = <&phy3>;
285			tbi-handle = <&tbi1>;
286			sleep = <&pmc 0x30000000>;
287			fsl,magic-packet;
288
289			mdio@520 {
290				#address-cells = <1>;
291				#size-cells = <0>;
292				compatible = "fsl,gianfar-tbi";
293				reg = <0x520 0x20>;
294
295				tbi1: tbi-phy@11 {
296					reg = <0x11>;
297					device_type = "tbi-phy";
298				};
299			};
300		};
301
302		serial0: serial@4500 {
303			cell-index = <0>;
304			device_type = "serial";
305			compatible = "fsl,ns16550", "ns16550";
306			reg = <0x4500 0x100>;
307			clock-frequency = <0>;
308			interrupts = <9 0x8>;
309			interrupt-parent = <&ipic>;
310		};
311
312		serial1: serial@4600 {
313			cell-index = <1>;
314			device_type = "serial";
315			compatible = "fsl,ns16550", "ns16550";
316			reg = <0x4600 0x100>;
317			clock-frequency = <0>;
318			interrupts = <10 0x8>;
319			interrupt-parent = <&ipic>;
320		};
321
322		crypto@30000 {
323			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
324				     "fsl,sec2.1", "fsl,sec2.0";
325			reg = <0x30000 0x10000>;
326			interrupts = <11 0x8>;
327			interrupt-parent = <&ipic>;
328			fsl,num-channels = <4>;
329			fsl,channel-fifo-len = <24>;
330			fsl,exec-units-mask = <0x9fe>;
331			fsl,descriptor-types-mask = <0x3ab0ebf>;
332			sleep = <&pmc 0x03000000>;
333		};
334
335		sata@18000 {
336			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
337			reg = <0x18000 0x1000>;
338			interrupts = <44 0x8>;
339			interrupt-parent = <&ipic>;
340			sleep = <&pmc 0x000000c0>;
341		};
342
343		sata@19000 {
344			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
345			reg = <0x19000 0x1000>;
346			interrupts = <45 0x8>;
347			interrupt-parent = <&ipic>;
348			sleep = <&pmc 0x00000030>;
349		};
350
351		/* IPIC
352		 * interrupts cell = <intr #, sense>
353		 * sense values match linux IORESOURCE_IRQ_* defines:
354		 * sense == 8: Level, low assertion
355		 * sense == 2: Edge, high-to-low change
356		 */
357		ipic: interrupt-controller@700 {
358			compatible = "fsl,ipic";
359			interrupt-controller;
360			#address-cells = <0>;
361			#interrupt-cells = <2>;
362			reg = <0x700 0x100>;
363		};
364
365		pmc: power@b00 {
366			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
367			reg = <0xb00 0x100 0xa00 0x100>;
368			interrupts = <80 0x8>;
369			interrupt-parent = <&ipic>;
370		};
371	};
372
373	pci0: pci@e0008500 {
374		interrupt-map-mask = <0xf800 0 0 7>;
375		interrupt-map = <
376				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
377
378				/* IDSEL AD14 IRQ6 inta */
379				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
380
381				/* IDSEL AD15 IRQ5 inta */
382				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
383		interrupt-parent = <&ipic>;
384		interrupts = <66 0x8>;
385		bus-range = <0 0>;
386		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
387		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
388		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
389		sleep = <&pmc 0x00010000>;
390		clock-frequency = <66666666>;
391		#interrupt-cells = <1>;
392		#size-cells = <2>;
393		#address-cells = <3>;
394		reg = <0xe0008500 0x100		/* internal registers */
395		       0xe0008300 0x8>;		/* config space access registers */
396		compatible = "fsl,mpc8349-pci";
397		device_type = "pci";
398	};
399
400	pci1: pcie@e0009000 {
401		#address-cells = <3>;
402		#size-cells = <2>;
403		#interrupt-cells = <1>;
404		device_type = "pci";
405		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
406		reg = <0xe0009000 0x00001000>;
407		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
408		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
409		bus-range = <0 255>;
410		interrupt-map-mask = <0xf800 0 0 7>;
411		interrupt-map = <0 0 0 1 &ipic 1 8
412				 0 0 0 2 &ipic 1 8
413				 0 0 0 3 &ipic 1 8
414				 0 0 0 4 &ipic 1 8>;
415		sleep = <&pmc 0x00300000>;
416		clock-frequency = <0>;
417
418		pcie@0 {
419			#address-cells = <3>;
420			#size-cells = <2>;
421			device_type = "pci";
422			reg = <0 0 0 0 0>;
423			ranges = <0x02000000 0 0xa8000000
424				  0x02000000 0 0xa8000000
425				  0 0x10000000
426				  0x01000000 0 0x00000000
427				  0x01000000 0 0x00000000
428				  0 0x00800000>;
429		};
430	};
431
432	pci2: pcie@e000a000 {
433		#address-cells = <3>;
434		#size-cells = <2>;
435		#interrupt-cells = <1>;
436		device_type = "pci";
437		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
438		reg = <0xe000a000 0x00001000>;
439		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
440			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
441		bus-range = <0 255>;
442		interrupt-map-mask = <0xf800 0 0 7>;
443		interrupt-map = <0 0 0 1 &ipic 2 8
444				 0 0 0 2 &ipic 2 8
445				 0 0 0 3 &ipic 2 8
446				 0 0 0 4 &ipic 2 8>;
447		sleep = <&pmc 0x000c0000>;
448		clock-frequency = <0>;
449
450		pcie@0 {
451			#address-cells = <3>;
452			#size-cells = <2>;
453			device_type = "pci";
454			reg = <0 0 0 0 0>;
455			ranges = <0x02000000 0 0xc8000000
456				  0x02000000 0 0xc8000000
457				  0 0x10000000
458				  0x01000000 0 0x00000000
459				  0x01000000 0 0x00000000
460				  0 0x00800000>;
461		};
462	};
463};
464