1/*
2 * linux/arch/arm/mach-omap1/board-innovator.c
3 *
4 * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
5 *
6 * Copyright (C) 2001 RidgeRun, Inc.
7 * Author: Greg Lonnon <glonnon@ridgerun.com>
8 *
9 * Copyright (C) 2002 MontaVista Software, Inc.
10 *
11 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
17 */
18#include <linux/gpio.h>
19#include <linux/kernel.h>
20#include <linux/init.h>
21#include <linux/platform_device.h>
22#include <linux/delay.h>
23#include <linux/mtd/mtd.h>
24#include <linux/mtd/partitions.h>
25#include <linux/mtd/physmap.h>
26#include <linux/input.h>
27#include <linux/smc91x.h>
28#include <linux/omapfb.h>
29
30#include <asm/mach-types.h>
31#include <asm/mach/arch.h>
32#include <asm/mach/map.h>
33
34#include <mach/mux.h>
35#include <mach/flash.h>
36#include <mach/tc.h>
37#include <linux/platform_data/keypad-omap.h>
38
39#include <mach/hardware.h>
40#include <mach/usb.h>
41
42#include "iomap.h"
43#include "common.h"
44#include "mmc.h"
45
46/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
47#define INNOVATOR1610_ETHR_START	0x04000300
48
49static const unsigned int innovator_keymap[] = {
50	KEY(0, 0, KEY_F1),
51	KEY(3, 0, KEY_DOWN),
52	KEY(1, 1, KEY_F2),
53	KEY(2, 1, KEY_RIGHT),
54	KEY(0, 2, KEY_F3),
55	KEY(1, 2, KEY_F4),
56	KEY(2, 2, KEY_UP),
57	KEY(2, 3, KEY_ENTER),
58	KEY(3, 3, KEY_LEFT),
59};
60
61static struct mtd_partition innovator_partitions[] = {
62	/* bootloader (U-Boot, etc) in first sector */
63	{
64	      .name		= "bootloader",
65	      .offset		= 0,
66	      .size		= SZ_128K,
67	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
68	},
69	/* bootloader params in the next sector */
70	{
71	      .name		= "params",
72	      .offset		= MTDPART_OFS_APPEND,
73	      .size		= SZ_128K,
74	      .mask_flags	= 0,
75	},
76	/* kernel */
77	{
78	      .name		= "kernel",
79	      .offset		= MTDPART_OFS_APPEND,
80	      .size		= SZ_2M,
81	      .mask_flags	= 0
82	},
83	/* rest of flash1 is a file system */
84	{
85	      .name		= "rootfs",
86	      .offset		= MTDPART_OFS_APPEND,
87	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
88	      .mask_flags	= 0
89	},
90	/* file system */
91	{
92	      .name		= "filesystem",
93	      .offset		= MTDPART_OFS_APPEND,
94	      .size		= MTDPART_SIZ_FULL,
95	      .mask_flags	= 0
96	}
97};
98
99static struct physmap_flash_data innovator_flash_data = {
100	.width		= 2,
101	.set_vpp	= omap1_set_vpp,
102	.parts		= innovator_partitions,
103	.nr_parts	= ARRAY_SIZE(innovator_partitions),
104};
105
106static struct resource innovator_flash_resource = {
107	.start		= OMAP_CS0_PHYS,
108	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
109	.flags		= IORESOURCE_MEM,
110};
111
112static struct platform_device innovator_flash_device = {
113	.name		= "physmap-flash",
114	.id		= 0,
115	.dev		= {
116		.platform_data	= &innovator_flash_data,
117	},
118	.num_resources	= 1,
119	.resource	= &innovator_flash_resource,
120};
121
122static struct resource innovator_kp_resources[] = {
123	[0] = {
124		.start	= INT_KEYBOARD,
125		.end	= INT_KEYBOARD,
126		.flags	= IORESOURCE_IRQ,
127	},
128};
129
130static const struct matrix_keymap_data innovator_keymap_data = {
131	.keymap		= innovator_keymap,
132	.keymap_size	= ARRAY_SIZE(innovator_keymap),
133};
134
135static struct omap_kp_platform_data innovator_kp_data = {
136	.rows		= 8,
137	.cols		= 8,
138	.keymap_data	= &innovator_keymap_data,
139	.delay		= 4,
140};
141
142static struct platform_device innovator_kp_device = {
143	.name		= "omap-keypad",
144	.id		= -1,
145	.dev		= {
146		.platform_data = &innovator_kp_data,
147	},
148	.num_resources	= ARRAY_SIZE(innovator_kp_resources),
149	.resource	= innovator_kp_resources,
150};
151
152static struct smc91x_platdata innovator_smc91x_info = {
153	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
154	.leda	= RPC_LED_100_10,
155	.ledb	= RPC_LED_TX_RX,
156};
157
158#ifdef CONFIG_ARCH_OMAP15XX
159
160#include <linux/spi/spi.h>
161#include <linux/spi/ads7846.h>
162
163
164/* Only FPGA needs to be mapped here. All others are done with ioremap */
165static struct map_desc innovator1510_io_desc[] __initdata = {
166	{
167		.virtual	= OMAP1510_FPGA_BASE,
168		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
169		.length		= OMAP1510_FPGA_SIZE,
170		.type		= MT_DEVICE
171	}
172};
173
174static struct resource innovator1510_smc91x_resources[] = {
175	[0] = {
176		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
177		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
178		.flags	= IORESOURCE_MEM,
179	},
180	[1] = {
181		.start	= OMAP1510_INT_ETHER,
182		.end	= OMAP1510_INT_ETHER,
183		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
184	},
185};
186
187static struct platform_device innovator1510_smc91x_device = {
188	.name		= "smc91x",
189	.id		= 0,
190	.dev	= {
191		.platform_data	= &innovator_smc91x_info,
192	},
193	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
194	.resource	= innovator1510_smc91x_resources,
195};
196
197static struct platform_device innovator1510_lcd_device = {
198	.name		= "lcd_inn1510",
199	.id		= -1,
200};
201
202static struct platform_device innovator1510_spi_device = {
203	.name		= "spi_inn1510",
204	.id		= -1,
205};
206
207static struct platform_device *innovator1510_devices[] __initdata = {
208	&innovator_flash_device,
209	&innovator1510_smc91x_device,
210	&innovator_kp_device,
211	&innovator1510_lcd_device,
212	&innovator1510_spi_device,
213};
214
215static int innovator_get_pendown_state(void)
216{
217	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
218}
219
220static const struct ads7846_platform_data innovator1510_ts_info = {
221	.model			= 7846,
222	.vref_delay_usecs	= 100,	/* internal, no capacitor */
223	.x_plate_ohms		= 419,
224	.y_plate_ohms		= 486,
225	.get_pendown_state	= innovator_get_pendown_state,
226};
227
228static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
229	/* FPGA (bus "10") CS0 has an ads7846e */
230	.modalias		= "ads7846",
231	.platform_data		= &innovator1510_ts_info,
232	.irq			= OMAP1510_INT_FPGA_TS,
233	.max_speed_hz		= 120000 /* max sample rate at 3V */
234					* 26 /* command + data + overhead */,
235	.bus_num		= 10,
236	.chip_select		= 0,
237} };
238
239#endif /* CONFIG_ARCH_OMAP15XX */
240
241#ifdef CONFIG_ARCH_OMAP16XX
242
243static struct resource innovator1610_smc91x_resources[] = {
244	[0] = {
245		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
246		.end	= INNOVATOR1610_ETHR_START + 0xf,
247		.flags	= IORESOURCE_MEM,
248	},
249	[1] = {
250		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
251	},
252};
253
254static struct platform_device innovator1610_smc91x_device = {
255	.name		= "smc91x",
256	.id		= 0,
257	.dev	= {
258		.platform_data	= &innovator_smc91x_info,
259	},
260	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
261	.resource	= innovator1610_smc91x_resources,
262};
263
264static struct platform_device innovator1610_lcd_device = {
265	.name		= "inn1610_lcd",
266	.id		= -1,
267};
268
269static struct platform_device *innovator1610_devices[] __initdata = {
270	&innovator_flash_device,
271	&innovator1610_smc91x_device,
272	&innovator_kp_device,
273	&innovator1610_lcd_device,
274};
275
276#endif /* CONFIG_ARCH_OMAP16XX */
277
278static void __init innovator_init_smc91x(void)
279{
280	if (cpu_is_omap1510()) {
281		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
282			   OMAP1510_FPGA_RST);
283		udelay(750);
284	} else {
285		if (gpio_request(0, "SMC91x irq") < 0) {
286			printk("Error requesting gpio 0 for smc91x irq\n");
287			return;
288		}
289	}
290}
291
292#ifdef CONFIG_ARCH_OMAP15XX
293static struct omap_usb_config innovator1510_usb_config __initdata = {
294	/* for bundled non-standard host and peripheral cables */
295	.hmc_mode	= 4,
296
297	.register_host	= 1,
298	.pins[1]	= 6,
299	.pins[2]	= 6,		/* Conflicts with UART2 */
300
301	.register_dev	= 1,
302	.pins[0]	= 2,
303};
304
305static struct omap_lcd_config innovator1510_lcd_config __initdata = {
306	.ctrl_name	= "internal",
307};
308#endif
309
310#ifdef CONFIG_ARCH_OMAP16XX
311static struct omap_usb_config h2_usb_config __initdata = {
312	/* usb1 has a Mini-AB port and external isp1301 transceiver */
313	.otg		= 2,
314
315#if IS_ENABLED(CONFIG_USB_OMAP)
316	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
317	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
318#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
319	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
320	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
321#endif
322
323	.pins[1]	= 3,
324};
325
326static struct omap_lcd_config innovator1610_lcd_config __initdata = {
327	.ctrl_name	= "internal",
328};
329#endif
330
331#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
332
333static int mmc_set_power(struct device *dev, int slot, int power_on,
334				int vdd)
335{
336	if (power_on)
337		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
338				OMAP1510_FPGA_POWER);
339	else
340		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
341				OMAP1510_FPGA_POWER);
342
343	return 0;
344}
345
346/*
347 * Innovator could use the following functions tested:
348 * - mmc_get_wp that uses OMAP_MPUIO(3)
349 * - mmc_get_cover_state that uses FPGA F4 UIO43
350 */
351static struct omap_mmc_platform_data mmc1_data = {
352	.nr_slots                       = 1,
353	.slots[0]       = {
354		.set_power		= mmc_set_power,
355		.wires			= 4,
356		.name                   = "mmcblk",
357	},
358};
359
360static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
361
362static void __init innovator_mmc_init(void)
363{
364	mmc_data[0] = &mmc1_data;
365	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
366}
367
368#else
369static inline void innovator_mmc_init(void)
370{
371}
372#endif
373
374static void __init innovator_init(void)
375{
376	if (cpu_is_omap1510())
377		omap1510_fpga_init_irq();
378	innovator_init_smc91x();
379
380#ifdef CONFIG_ARCH_OMAP15XX
381	if (cpu_is_omap1510()) {
382		unsigned char reg;
383
384		/* mux pins for uarts */
385		omap_cfg_reg(UART1_TX);
386		omap_cfg_reg(UART1_RTS);
387		omap_cfg_reg(UART2_TX);
388		omap_cfg_reg(UART2_RTS);
389		omap_cfg_reg(UART3_TX);
390		omap_cfg_reg(UART3_RX);
391
392		reg = __raw_readb(OMAP1510_FPGA_POWER);
393		reg |= OMAP1510_FPGA_PCR_COM1_EN;
394		__raw_writeb(reg, OMAP1510_FPGA_POWER);
395		udelay(10);
396
397		reg = __raw_readb(OMAP1510_FPGA_POWER);
398		reg |= OMAP1510_FPGA_PCR_COM2_EN;
399		__raw_writeb(reg, OMAP1510_FPGA_POWER);
400		udelay(10);
401
402		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
403		spi_register_board_info(innovator1510_boardinfo,
404				ARRAY_SIZE(innovator1510_boardinfo));
405	}
406#endif
407#ifdef CONFIG_ARCH_OMAP16XX
408	if (!cpu_is_omap1510()) {
409		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
410		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
411		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
412	}
413#endif
414
415#ifdef CONFIG_ARCH_OMAP15XX
416	if (cpu_is_omap1510()) {
417		omap1_usb_init(&innovator1510_usb_config);
418		omapfb_set_lcd_config(&innovator1510_lcd_config);
419	}
420#endif
421#ifdef CONFIG_ARCH_OMAP16XX
422	if (cpu_is_omap1610()) {
423		omap1_usb_init(&h2_usb_config);
424		omapfb_set_lcd_config(&innovator1610_lcd_config);
425	}
426#endif
427	omap_serial_init();
428	omap_register_i2c_bus(1, 100, NULL, 0);
429	innovator_mmc_init();
430}
431
432/*
433 * REVISIT: Assume 15xx for now, we don't want to do revision check
434 * until later on. The right way to fix this is to set up a different
435 * machine_id for 16xx Innovator, or use device tree.
436 */
437static void __init innovator_map_io(void)
438{
439#ifdef CONFIG_ARCH_OMAP15XX
440	omap15xx_map_io();
441
442	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
443	udelay(10);	/* Delay needed for FPGA */
444
445	/* Dump the Innovator FPGA rev early - useful info for support. */
446	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
447			__raw_readb(OMAP1510_FPGA_REV_HIGH),
448			__raw_readb(OMAP1510_FPGA_REV_LOW),
449			__raw_readb(OMAP1510_FPGA_BOARD_REV));
450#endif
451}
452
453MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
454	/* Maintainer: MontaVista Software, Inc. */
455	.atag_offset	= 0x100,
456	.map_io		= innovator_map_io,
457	.init_early     = omap1_init_early,
458	.init_irq	= omap1_init_irq,
459	.init_machine	= innovator_init,
460	.init_late	= omap1_init_late,
461	.init_time	= omap1_timer_init,
462	.restart	= omap1_restart,
463MACHINE_END
464