1/* 2 * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC 3 * 4 * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> 5 * 6 * Licensed under GPLv2 or later 7 */ 8 9/include/ "skeleton.dtsi" 10 11/ { 12 compatible = "wm,wm8650"; 13 14 cpus { 15 #address-cells = <0>; 16 #size-cells = <0>; 17 18 cpu { 19 device_type = "cpu"; 20 compatible = "arm,arm926ej-s"; 21 }; 22 }; 23 24 aliases { 25 serial0 = &uart0; 26 serial1 = &uart1; 27 }; 28 29 soc { 30 #address-cells = <1>; 31 #size-cells = <1>; 32 compatible = "simple-bus"; 33 ranges; 34 interrupt-parent = <&intc0>; 35 36 intc0: interrupt-controller@d8140000 { 37 compatible = "via,vt8500-intc"; 38 interrupt-controller; 39 reg = <0xd8140000 0x10000>; 40 #interrupt-cells = <1>; 41 }; 42 43 /* Secondary IC cascaded to intc0 */ 44 intc1: interrupt-controller@d8150000 { 45 compatible = "via,vt8500-intc"; 46 interrupt-controller; 47 #interrupt-cells = <1>; 48 reg = <0xD8150000 0x10000>; 49 interrupts = <56 57 58 59 60 61 62 63>; 50 }; 51 52 pinctrl: pinctrl@d8110000 { 53 compatible = "wm,wm8650-pinctrl"; 54 reg = <0xd8110000 0x10000>; 55 interrupt-controller; 56 #interrupt-cells = <2>; 57 gpio-controller; 58 #gpio-cells = <2>; 59 }; 60 61 pmc@d8130000 { 62 compatible = "via,vt8500-pmc"; 63 reg = <0xd8130000 0x1000>; 64 65 clocks { 66 #address-cells = <1>; 67 #size-cells = <0>; 68 69 ref25: ref25M { 70 #clock-cells = <0>; 71 compatible = "fixed-clock"; 72 clock-frequency = <25000000>; 73 }; 74 75 ref24: ref24M { 76 #clock-cells = <0>; 77 compatible = "fixed-clock"; 78 clock-frequency = <24000000>; 79 }; 80 81 plla: plla { 82 #clock-cells = <0>; 83 compatible = "wm,wm8650-pll-clock"; 84 clocks = <&ref25>; 85 reg = <0x200>; 86 }; 87 88 pllb: pllb { 89 #clock-cells = <0>; 90 compatible = "wm,wm8650-pll-clock"; 91 clocks = <&ref25>; 92 reg = <0x204>; 93 }; 94 95 pllc: pllc { 96 #clock-cells = <0>; 97 compatible = "wm,wm8650-pll-clock"; 98 clocks = <&ref25>; 99 reg = <0x208>; 100 }; 101 102 plld: plld { 103 #clock-cells = <0>; 104 compatible = "wm,wm8650-pll-clock"; 105 clocks = <&ref25>; 106 reg = <0x20c>; 107 }; 108 109 plle: plle { 110 #clock-cells = <0>; 111 compatible = "wm,wm8650-pll-clock"; 112 clocks = <&ref25>; 113 reg = <0x210>; 114 }; 115 116 clkarm: arm { 117 #clock-cells = <0>; 118 compatible = "via,vt8500-device-clock"; 119 clocks = <&plla>; 120 divisor-reg = <0x300>; 121 }; 122 123 clkahb: ahb { 124 #clock-cells = <0>; 125 compatible = "via,vt8500-device-clock"; 126 clocks = <&pllb>; 127 divisor-reg = <0x304>; 128 }; 129 130 clkapb: apb { 131 #clock-cells = <0>; 132 compatible = "via,vt8500-device-clock"; 133 clocks = <&pllb>; 134 divisor-reg = <0x320>; 135 }; 136 137 clkddr: ddr { 138 #clock-cells = <0>; 139 compatible = "via,vt8500-device-clock"; 140 clocks = <&plld>; 141 divisor-reg = <0x310>; 142 }; 143 144 clkuart0: uart0 { 145 #clock-cells = <0>; 146 compatible = "via,vt8500-device-clock"; 147 clocks = <&ref24>; 148 enable-reg = <0x250>; 149 enable-bit = <1>; 150 }; 151 152 clkuart1: uart1 { 153 #clock-cells = <0>; 154 compatible = "via,vt8500-device-clock"; 155 clocks = <&ref24>; 156 enable-reg = <0x250>; 157 enable-bit = <2>; 158 }; 159 160 clksdhc: sdhc { 161 #clock-cells = <0>; 162 compatible = "via,vt8500-device-clock"; 163 clocks = <&pllb>; 164 divisor-reg = <0x328>; 165 divisor-mask = <0x3f>; 166 enable-reg = <0x254>; 167 enable-bit = <18>; 168 }; 169 }; 170 }; 171 172 timer@d8130100 { 173 compatible = "via,vt8500-timer"; 174 reg = <0xd8130100 0x28>; 175 interrupts = <36>; 176 }; 177 178 ehci@d8007900 { 179 compatible = "via,vt8500-ehci"; 180 reg = <0xd8007900 0x200>; 181 interrupts = <43>; 182 }; 183 184 uhci@d8007b00 { 185 compatible = "platform-uhci"; 186 reg = <0xd8007b00 0x200>; 187 interrupts = <43>; 188 }; 189 190 fb: fb@d8050800 { 191 compatible = "wm,wm8505-fb"; 192 reg = <0xd8050800 0x200>; 193 }; 194 195 ge_rops@d8050400 { 196 compatible = "wm,prizm-ge-rops"; 197 reg = <0xd8050400 0x100>; 198 }; 199 200 uart0: serial@d8200000 { 201 compatible = "via,vt8500-uart"; 202 reg = <0xd8200000 0x1040>; 203 interrupts = <32>; 204 clocks = <&clkuart0>; 205 status = "disabled"; 206 }; 207 208 uart1: serial@d82b0000 { 209 compatible = "via,vt8500-uart"; 210 reg = <0xd82b0000 0x1040>; 211 interrupts = <33>; 212 clocks = <&clkuart1>; 213 status = "disabled"; 214 }; 215 216 rtc@d8100000 { 217 compatible = "via,vt8500-rtc"; 218 reg = <0xd8100000 0x10000>; 219 interrupts = <48>; 220 }; 221 222 ethernet@d8004000 { 223 compatible = "via,vt8500-rhine"; 224 reg = <0xd8004000 0x100>; 225 interrupts = <10>; 226 }; 227 }; 228}; 229