1/dts-v1/;
2
3#include "tegra30-colibri.dtsi"
4
5/ {
6	model = "Toradex Colibri T30 on Colibri Evaluation Board";
7	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
8
9	aliases {
10		rtc0 = "/i2c@7000c000/rtc@68";
11		rtc1 = "/i2c@7000d000/tps65911@2d";
12		rtc2 = "/rtc@7000e000";
13		serial0 = &uarta;
14		serial1 = &uartb;
15		serial2 = &uartd;
16	};
17
18	host1x@50000000 {
19		dc@54200000 {
20			rgb {
21				status = "okay";
22				nvidia,panel = <&panel>;
23			};
24		};
25		hdmi@54280000 {
26			status = "okay";
27		};
28	};
29
30	serial@70006000 {
31		status = "okay";
32	};
33
34	serial@70006040 {
35		compatible = "nvidia,tegra30-hsuart";
36		status = "okay";
37	};
38
39	serial@70006300 {
40		compatible = "nvidia,tegra30-hsuart";
41		status = "okay";
42	};
43
44	pwm@7000a000 {
45		status = "okay";
46	};
47
48	/*
49	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
50	 * board)
51	 */
52	i2c@7000c000 {
53		status = "okay";
54		clock-frequency = <100000>;
55
56		/* M41T0M6 real time clock on carrier board */
57		rtc@68 {
58			compatible = "stm,m41t00";
59			reg = <0x68>;
60		};
61	};
62
63	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
64	hdmiddc: i2c@7000c700 {
65		status = "okay";
66	};
67
68	/* SPI1: Colibri SSP */
69	spi@7000d400 {
70		status = "okay";
71		spi-max-frequency = <25000000>;
72		can0: can@0 {
73			compatible = "microchip,mcp2515";
74			reg = <0>;
75			clocks = <&clk16m>;
76			interrupt-parent = <&gpio>;
77			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
78			spi-max-frequency = <10000000>;
79		};
80		spidev0: spi@1 {
81			compatible = "spidev";
82			reg = <1>;
83			spi-max-frequency = <25000000>;
84		};
85	};
86
87	sdhci@78000200 {
88		status = "okay";
89		bus-width = <4>;
90		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
91		no-1-8-v;
92	};
93
94	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
95	usb@7d000000 {
96		status = "okay";
97	};
98
99	usb-phy@7d000000 {
100		status = "okay";
101		dr_mode = "otg";
102		vbus-supply = <&usbc_vbus_reg>;
103	};
104
105	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
106	usb@7d008000 {
107		status = "okay";
108	};
109
110	usb-phy@7d008000 {
111		status = "okay";
112		vbus-supply = <&usbh_vbus_reg>;
113	};
114
115	backlight: backlight {
116		compatible = "pwm-backlight";
117
118		/* PWM<A> */
119		pwms = <&pwm 0 5000000>;
120		brightness-levels = <255 128 64 32 16 8 4 0>;
121		default-brightness-level = <6>;
122		/* BL_ON */
123		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
124	};
125
126	clocks {
127		clk16m: clk@1 {
128			compatible = "fixed-clock";
129			reg=<1>;
130			#clock-cells = <0>;
131			clock-frequency = <16000000>;
132			clock-output-names = "clk16m";
133		};
134	};
135
136	gpio-keys {
137		compatible = "gpio-keys";
138
139		power {
140			label = "Power";
141			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
142			linux,code = <KEY_POWER>;
143			debounce-interval = <10>;
144			gpio-key,wakeup;
145		};
146	};
147
148	panel: panel {
149		/*
150		 * edt,et057090dhu: EDT 5.7" LCD TFT
151		 * edt,et070080dh6: EDT 7.0" LCD TFT
152		 */
153		compatible = "edt,et057090dhu", "simple-panel";
154
155		backlight = <&backlight>;
156	};
157
158	pwmleds {
159		compatible = "pwm-leds";
160
161		pwmb {
162			label = "PWM<B>";
163			pwms = <&pwm 1 19600>;
164			max-brightness = <255>;
165		};
166		pwmc {
167			label = "PWM<C>";
168			pwms = <&pwm 2 19600>;
169			max-brightness = <255>;
170		};
171		pwmd {
172			label = "PWM<D>";
173			pwms = <&pwm 3 19600>;
174			max-brightness = <255>;
175		};
176	};
177
178	regulators {
179		sys_5v0_reg: regulator@1 {
180			compatible = "regulator-fixed";
181			reg = <1>;
182			regulator-name = "5v0";
183			regulator-min-microvolt = <5000000>;
184			regulator-max-microvolt = <5000000>;
185			regulator-always-on;
186		};
187
188		usbc_vbus_reg: regulator@2 {
189			compatible = "regulator-fixed";
190			reg = <2>;
191			regulator-name = "usbc_vbus";
192			regulator-min-microvolt = <5000000>;
193			regulator-max-microvolt = <5000000>;
194			vin-supply = <&sys_5v0_reg>;
195		};
196
197		/* USBH_PEN */
198		usbh_vbus_reg: regulator@3 {
199			compatible = "regulator-fixed";
200			reg = <3>;
201			regulator-name = "usbh_vbus";
202			regulator-min-microvolt = <5000000>;
203			regulator-max-microvolt = <5000000>;
204			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
205			vin-supply = <&sys_5v0_reg>;
206		};
207	};
208};
209