1/dts-v1/; 2 3#include "tegra20-tamonten.dtsi" 4 5/ { 6 model = "Avionic Design Tamonten Evaluation Carrier"; 7 compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; 8 9 host1x@50000000 { 10 hdmi@54280000 { 11 status = "okay"; 12 }; 13 }; 14 15 i2c@7000c000 { 16 wm8903: wm8903@1a { 17 compatible = "wlf,wm8903"; 18 reg = <0x1a>; 19 interrupt-parent = <&gpio>; 20 interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>; 21 22 gpio-controller; 23 #gpio-cells = <2>; 24 25 micdet-cfg = <0>; 26 micdet-delay = <100>; 27 gpio-cfg = <0xffffffff 28 0xffffffff 29 0 30 0xffffffff 31 0xffffffff>; 32 }; 33 }; 34 35 pcie-controller@80003000 { 36 status = "okay"; 37 38 pci@1,0 { 39 status = "okay"; 40 }; 41 }; 42 43 sound { 44 compatible = "ad,tegra-audio-wm8903-tec", 45 "nvidia,tegra-audio-wm8903"; 46 nvidia,model = "Avionic Design TEC"; 47 48 nvidia,audio-routing = 49 "Headphone Jack", "HPOUTR", 50 "Headphone Jack", "HPOUTL", 51 "Int Spk", "ROP", 52 "Int Spk", "RON", 53 "Int Spk", "LOP", 54 "Int Spk", "LON", 55 "Mic Jack", "MICBIAS", 56 "IN1L", "Mic Jack"; 57 58 nvidia,i2s-controller = <&tegra_i2s1>; 59 nvidia,audio-codec = <&wm8903>; 60 61 nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; 62 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) 63 GPIO_ACTIVE_HIGH>; 64 65 clocks = <&tegra_car TEGRA20_CLK_PLL_A>, 66 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, 67 <&tegra_car TEGRA20_CLK_CDEV1>; 68 clock-names = "pll_a", "pll_a_out0", "mclk"; 69 }; 70 71 regulators { 72 vcc_24v_reg: regulator@100 { 73 compatible = "regulator-fixed"; 74 reg = <100>; 75 regulator-name = "vcc_24v"; 76 regulator-min-microvolt = <24000000>; 77 regulator-max-microvolt = <24000000>; 78 regulator-always-on; 79 }; 80 81 vdd_5v0_reg: regulator@101 { 82 compatible = "regulator-fixed"; 83 reg = <101>; 84 regulator-name = "vdd_5v0"; 85 vin-supply = <&vcc_24v_reg>; 86 regulator-min-microvolt = <5000000>; 87 regulator-max-microvolt = <5000000>; 88 regulator-always-on; 89 }; 90 91 vdd_3v3_reg: regulator@102 { 92 compatible = "regulator-fixed"; 93 reg = <102>; 94 regulator-name = "vdd_3v3"; 95 vin-supply = <&vcc_24v_reg>; 96 regulator-min-microvolt = <3300000>; 97 regulator-max-microvolt = <3300000>; 98 regulator-always-on; 99 }; 100 101 vdd_1v8_reg: regulator@103 { 102 compatible = "regulator-fixed"; 103 reg = <103>; 104 regulator-name = "vdd_1v8"; 105 vin-supply = <&vdd_3v3_reg>; 106 regulator-min-microvolt = <1800000>; 107 regulator-max-microvolt = <1800000>; 108 regulator-always-on; 109 }; 110 }; 111}; 112