1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun5i-a10s.dtsi"
50#include "sunxi-common-regulators.dtsi"
51
52#include <dt-bindings/gpio/gpio.h>
53#include <dt-bindings/pinctrl/sun4i-a10.h>
54
55/ {
56	model = "R7 A10s hdmi tv-stick";
57	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
58
59	soc@01c00000 {
60		mmc0: mmc@01c0f000 {
61			pinctrl-names = "default";
62			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
63			vmmc-supply = <&reg_vcc3v3>;
64			bus-width = <4>;
65			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
66			cd-inverted;
67			status = "okay";
68		};
69
70		mmc1: mmc@01c10000 {
71			pinctrl-names = "default";
72			pinctrl-0 = <&mmc1_pins_a>;
73			vmmc-supply = <&reg_vcc3v3>;
74			bus-width = <4>;
75			non-removable;
76			status = "okay";
77		};
78
79		usbphy: phy@01c13400 {
80			usb1_vbus-supply = <&reg_usb1_vbus>;
81			status = "okay";
82		};
83
84		ehci0: usb@01c14000 {
85			status = "okay";
86		};
87
88		ohci0: usb@01c14400 {
89			status = "okay";
90		};
91
92		pinctrl@01c20800 {
93			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
94				allwinner,pins = "PG1";
95				allwinner,function = "gpio_in";
96				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
97				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
98			};
99
100			led_pins_r7: led_pins@0 {
101				allwinner,pins = "PB2";
102				allwinner,function = "gpio_out";
103				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
104				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
105			};
106
107			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
108				allwinner,pins = "PG13";
109				allwinner,function = "gpio_out";
110				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
111				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
112			};
113		};
114
115		uart0: serial@01c28000 {
116			pinctrl-names = "default";
117			pinctrl-0 = <&uart0_pins_a>;
118			status = "okay";
119		};
120	};
121
122	leds {
123		compatible = "gpio-leds";
124		pinctrl-names = "default";
125		pinctrl-0 = <&led_pins_r7>;
126
127		green {
128			label = "r7-tv-dongle:green:usr";
129			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
130			default-state = "on";
131		};
132	};
133
134	reg_usb1_vbus: usb1-vbus {
135		pinctrl-0 = <&usb1_vbus_pin_r7>;
136		gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
137		status = "okay";
138	};
139};
140