1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun4i-a10.dtsi"
50#include "sunxi-common-regulators.dtsi"
51
52#include <dt-bindings/gpio/gpio.h>
53
54/ {
55	model = "BA10 tvbox";
56	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
57
58	soc@01c00000 {
59		emac: ethernet@01c0b000 {
60			pinctrl-names = "default";
61			pinctrl-0 = <&emac_pins_a>;
62			phy = <&phy1>;
63			status = "okay";
64		};
65
66		mdio@01c0b080 {
67			status = "okay";
68
69			phy1: ethernet-phy@1 {
70				reg = <1>;
71			};
72		};
73
74		mmc0: mmc@01c0f000 {
75			pinctrl-names = "default";
76			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
77			vmmc-supply = <&reg_vcc3v3>;
78			bus-width = <4>;
79			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
80			cd-inverted;
81			status = "okay";
82		};
83
84		usbphy: phy@01c13400 {
85			usb1_vbus-supply = <&reg_usb1_vbus>;
86			usb2_vbus-supply = <&reg_usb2_vbus>;
87			status = "okay";
88		};
89
90		ehci0: usb@01c14000 {
91			status = "okay";
92		};
93
94		ohci0: usb@01c14400 {
95			status = "okay";
96		};
97
98		ehci1: usb@01c1c000 {
99			status = "okay";
100		};
101
102		ohci1: usb@01c1c400 {
103			status = "okay";
104		};
105
106		pinctrl@01c20800 {
107			usb2_vbus_pin_a: usb2_vbus_pin@0 {
108				allwinner,pins = "PH12";
109			};
110		};
111
112		ir0: ir@01c21800 {
113			pinctrl-names = "default";
114			pinctrl-0 = <&ir0_pins_a>;
115			status = "okay";
116		};
117
118		uart0: serial@01c28000 {
119			pinctrl-names = "default";
120			pinctrl-0 = <&uart0_pins_a>;
121			status = "okay";
122		};
123
124		i2c0: i2c@01c2ac00 {
125			pinctrl-names = "default";
126			pinctrl-0 = <&i2c0_pins_a>;
127			status = "okay";
128
129			axp209: pmic@34 {
130				compatible = "x-powers,axp209";
131				reg = <0x34>;
132				interrupts = <0>;
133
134				interrupt-controller;
135				#interrupt-cells = <1>;
136			};
137		};
138	};
139
140	reg_usb1_vbus: usb1-vbus {
141		status = "okay";
142	};
143
144	reg_usb2_vbus: usb2-vbus {
145		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
146		status = "okay";
147	};
148};
149