1/dts-v1/;
2
3#include "skeleton.dtsi"
4#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
5#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
6#include <dt-bindings/soc/qcom,gsbi.h>
7
8/ {
9	model = "Qualcomm IPQ8064";
10	compatible = "qcom,ipq8064";
11	interrupt-parent = <&intc>;
12
13	cpus {
14		#address-cells = <1>;
15		#size-cells = <0>;
16
17		cpu@0 {
18			compatible = "qcom,krait";
19			enable-method = "qcom,kpss-acc-v1";
20			device_type = "cpu";
21			reg = <0>;
22			next-level-cache = <&L2>;
23			qcom,acc = <&acc0>;
24			qcom,saw = <&saw0>;
25		};
26
27		cpu@1 {
28			compatible = "qcom,krait";
29			enable-method = "qcom,kpss-acc-v1";
30			device_type = "cpu";
31			reg = <1>;
32			next-level-cache = <&L2>;
33			qcom,acc = <&acc1>;
34			qcom,saw = <&saw1>;
35		};
36
37		L2: l2-cache {
38			compatible = "cache";
39			cache-level = <2>;
40		};
41	};
42
43	cpu-pmu {
44		compatible = "qcom,krait-pmu";
45		interrupts = <1 10 0x304>;
46	};
47
48	reserved-memory {
49		#address-cells = <1>;
50		#size-cells = <1>;
51		ranges;
52
53		nss@40000000 {
54			reg = <0x40000000 0x1000000>;
55			no-map;
56		};
57
58		smem@41000000 {
59			reg = <0x41000000 0x200000>;
60			no-map;
61		};
62	};
63
64	clocks {
65		sleep_clk: sleep_clk {
66			compatible = "fixed-clock";
67			clock-frequency = <32768>;
68			#clock-cells = <0>;
69		};
70	};
71
72	soc: soc {
73		#address-cells = <1>;
74		#size-cells = <1>;
75		ranges;
76		compatible = "simple-bus";
77
78		lpass@28100000 {
79			compatible = "qcom,lpass-cpu";
80			status = "disabled";
81			clocks = <&lcc AHBIX_CLK>,
82					<&lcc MI2S_OSR_CLK>,
83					<&lcc MI2S_BIT_CLK>;
84			clock-names = "ahbix-clk",
85					"mi2s-osr-clk",
86					"mi2s-bit-clk";
87			interrupts = <0 85 1>;
88			interrupt-names = "lpass-irq-lpaif";
89			reg = <0x28100000 0x10000>;
90			reg-names = "lpass-lpaif";
91		};
92
93		qcom_pinmux: pinmux@800000 {
94			compatible = "qcom,ipq8064-pinctrl";
95			reg = <0x800000 0x4000>;
96
97			gpio-controller;
98			#gpio-cells = <2>;
99			interrupt-controller;
100			#interrupt-cells = <2>;
101			interrupts = <0 16 0x4>;
102		};
103
104		intc: interrupt-controller@2000000 {
105			compatible = "qcom,msm-qgic2";
106			interrupt-controller;
107			#interrupt-cells = <3>;
108			reg = <0x02000000 0x1000>,
109			      <0x02002000 0x1000>;
110		};
111
112		timer@200a000 {
113			compatible = "qcom,kpss-timer", "qcom,msm-timer";
114			interrupts = <1 1 0x301>,
115				     <1 2 0x301>,
116				     <1 3 0x301>,
117				     <1 4 0x301>,
118				     <1 5 0x301>;
119			reg = <0x0200a000 0x100>;
120			clock-frequency = <25000000>,
121					  <32768>;
122			clocks = <&sleep_clk>;
123			clock-names = "sleep";
124			cpu-offset = <0x80000>;
125		};
126
127		acc0: clock-controller@2088000 {
128			compatible = "qcom,kpss-acc-v1";
129			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
130		};
131
132		acc1: clock-controller@2098000 {
133			compatible = "qcom,kpss-acc-v1";
134			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
135		};
136
137		saw0: regulator@2089000 {
138			compatible = "qcom,saw2";
139			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
140			regulator;
141		};
142
143		saw1: regulator@2099000 {
144			compatible = "qcom,saw2";
145			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
146			regulator;
147		};
148
149		gsbi2: gsbi@12480000 {
150			compatible = "qcom,gsbi-v1.0.0";
151			cell-index = <2>;
152			reg = <0x12480000 0x100>;
153			clocks = <&gcc GSBI2_H_CLK>;
154			clock-names = "iface";
155			#address-cells = <1>;
156			#size-cells = <1>;
157			ranges;
158			status = "disabled";
159
160			syscon-tcsr = <&tcsr>;
161
162			serial@12490000 {
163				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
164				reg = <0x12490000 0x1000>,
165				      <0x12480000 0x1000>;
166				interrupts = <0 195 0x0>;
167				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
168				clock-names = "core", "iface";
169				status = "disabled";
170			};
171
172			i2c@124a0000 {
173				compatible = "qcom,i2c-qup-v1.1.1";
174				reg = <0x124a0000 0x1000>;
175				interrupts = <0 196 0>;
176
177				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
178				clock-names = "core", "iface";
179				status = "disabled";
180
181				#address-cells = <1>;
182				#size-cells = <0>;
183			};
184
185		};
186
187		gsbi4: gsbi@16300000 {
188			compatible = "qcom,gsbi-v1.0.0";
189			cell-index = <4>;
190			reg = <0x16300000 0x100>;
191			clocks = <&gcc GSBI4_H_CLK>;
192			clock-names = "iface";
193			#address-cells = <1>;
194			#size-cells = <1>;
195			ranges;
196			status = "disabled";
197
198			syscon-tcsr = <&tcsr>;
199
200			serial@16340000 {
201				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
202				reg = <0x16340000 0x1000>,
203				      <0x16300000 0x1000>;
204				interrupts = <0 152 0x0>;
205				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
206				clock-names = "core", "iface";
207				status = "disabled";
208			};
209
210			i2c@16380000 {
211				compatible = "qcom,i2c-qup-v1.1.1";
212				reg = <0x16380000 0x1000>;
213				interrupts = <0 153 0>;
214
215				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
216				clock-names = "core", "iface";
217				status = "disabled";
218
219				#address-cells = <1>;
220				#size-cells = <0>;
221			};
222		};
223
224		gsbi5: gsbi@1a200000 {
225			compatible = "qcom,gsbi-v1.0.0";
226			cell-index = <5>;
227			reg = <0x1a200000 0x100>;
228			clocks = <&gcc GSBI5_H_CLK>;
229			clock-names = "iface";
230			#address-cells = <1>;
231			#size-cells = <1>;
232			ranges;
233			status = "disabled";
234
235			syscon-tcsr = <&tcsr>;
236
237			serial@1a240000 {
238				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
239				reg = <0x1a240000 0x1000>,
240				      <0x1a200000 0x1000>;
241				interrupts = <0 154 0x0>;
242				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
243				clock-names = "core", "iface";
244				status = "disabled";
245			};
246
247			i2c@1a280000 {
248				compatible = "qcom,i2c-qup-v1.1.1";
249				reg = <0x1a280000 0x1000>;
250				interrupts = <0 155 0>;
251
252				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
253				clock-names = "core", "iface";
254				status = "disabled";
255
256				#address-cells = <1>;
257				#size-cells = <0>;
258			};
259
260			spi@1a280000 {
261				compatible = "qcom,spi-qup-v1.1.1";
262				reg = <0x1a280000 0x1000>;
263				interrupts = <0 155 0>;
264
265				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
266				clock-names = "core", "iface";
267				status = "disabled";
268
269				#address-cells = <1>;
270				#size-cells = <0>;
271			};
272		};
273
274		sata_phy: sata-phy@1b400000 {
275			compatible = "qcom,ipq806x-sata-phy";
276			reg = <0x1b400000 0x200>;
277
278			clocks = <&gcc SATA_PHY_CFG_CLK>;
279			clock-names = "cfg";
280
281			#phy-cells = <0>;
282			status = "disabled";
283		};
284
285		sata@29000000 {
286			compatible = "qcom,ipq806x-ahci", "generic-ahci";
287			reg = <0x29000000 0x180>;
288
289			interrupts = <0 209 0x0>;
290
291			clocks = <&gcc SFAB_SATA_S_H_CLK>,
292				 <&gcc SATA_H_CLK>,
293				 <&gcc SATA_A_CLK>,
294				 <&gcc SATA_RXOOB_CLK>,
295				 <&gcc SATA_PMALIVE_CLK>;
296			clock-names = "slave_face", "iface", "core",
297					"rxoob", "pmalive";
298
299			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
300			assigned-clock-rates = <100000000>, <100000000>;
301
302			phys = <&sata_phy>;
303			phy-names = "sata-phy";
304			status = "disabled";
305		};
306
307		qcom,ssbi@500000 {
308			compatible = "qcom,ssbi";
309			reg = <0x00500000 0x1000>;
310			qcom,controller-type = "pmic-arbiter";
311		};
312
313		gcc: clock-controller@900000 {
314			compatible = "qcom,gcc-ipq8064";
315			reg = <0x00900000 0x4000>;
316			#clock-cells = <1>;
317			#reset-cells = <1>;
318		};
319
320		tcsr: syscon@1a400000 {
321			compatible = "qcom,tcsr-ipq8064", "syscon";
322			reg = <0x1a400000 0x100>;
323		};
324
325		lcc: clock-controller@28000000 {
326			compatible = "qcom,lcc-ipq8064";
327			reg = <0x28000000 0x1000>;
328			#clock-cells = <1>;
329			#reset-cells = <1>;
330		};
331
332	};
333};
334