1/*
2 * Suppport for CompuLab SBC-T3517 with CM-T3517
3 */
4
5#include "omap3-cm-t3517.dts"
6#include "omap3-sb-t35.dtsi"
7
8/ {
9	model = "CompuLab SBC-T3517 with CM-T3517";
10	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
11
12	aliases {
13		display0 = &dvi0;
14		display1 = &tv0;
15	};
16
17	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
18	vddvario: regulator-vddvario-sb-t35 {
19		compatible = "regulator-fixed";
20		regulator-name = "vddvario";
21		regulator-always-on;
22	};
23
24	vdd33a: regulator-vdd33a-sb-t35 {
25		compatible = "regulator-fixed";
26		regulator-name = "vdd33a";
27		regulator-always-on;
28	};
29};
30
31&omap3_pmx_core {
32	pinctrl-names = "default";
33	pinctrl-0 = <
34			&sb_t35_usb_hub_pins
35			&usb_hub_pins
36		    >;
37
38	mmc1_aux_pins: pinmux_mmc1_aux_pins {
39		pinctrl-single,pins = <
40			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
41			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
42		>;
43	};
44
45	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
46		pinctrl-single,pins = <
47			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
48		>;
49	};
50};
51
52&mmc1 {
53	pinctrl-names = "default";
54	pinctrl-0 = <
55		&mmc1_pins
56		&mmc1_aux_pins
57	>;
58
59	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
60	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
61};
62
63&dss {
64	port {
65		dpi_out: endpoint {
66			remote-endpoint = <&tfp410_in>;
67			data-lines = <24>;
68		};
69	};
70};
71
72&gpmc {
73	ranges = <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
74		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
75};
76