1/*
2 * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This library is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This library is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include <dt-bindings/gpio/gpio.h>
45#include "meson8.dtsi"
46
47/ {
48	model = "MINIX NEO-X8";
49	compatible = "minix,neo-x8", "amlogic,meson8";
50
51	aliases {
52		serial0 = &uart_AO;
53	};
54
55	memory {
56		reg = <0x40000000 0x80000000>;
57	};
58
59	gpio-leds {
60		compatible = "gpio-leds";
61
62		blue {
63			label = "x8:blue:power";
64			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
65		};
66	};
67};
68
69&uart_AO {
70	status = "okay";
71	pinctrl-0 = <&uart_ao_a_pins>;
72	pinctrl-names = "default";
73};
74
75&i2c_AO {
76	status = "okay";
77	pinctrl-0 = <&i2c_ao_pins>;
78	pinctrl-names = "default";
79
80	pmic@32 {
81		compatible = "ricoh,rn5t618";
82		reg = <0x32>;
83
84		regulators {
85		};
86	};
87
88	rtc@51 {
89		compatible = "nxp,pcf8563";
90		reg = <0x51>;
91	};
92};
93
94&spifc {
95	status = "okay";
96	pinctrl-0 = <&spi_nor_pins>;
97	pinctrl-names = "default";
98
99	spi-flash@0 {
100		compatible = "mxicy,mx25l1606e";
101		#address-cells = <1>;
102		#size-cells = <1>;
103		reg = <0>;
104		spi-max-frequency = <30000000>;
105
106		partition@0 {
107			label = "boot";
108			reg = <0x0 0x100000>;
109		};
110
111		partition@100000 {
112			label = "env";
113			reg = <0x100000 0x10000>;
114		};
115	};
116};
117
118&ir_receiver {
119	status = "okay";
120	pinctrl-0 = <&ir_recv_pins>;
121	pinctrl-names = "default";
122};
123
124&ethmac {
125	status = "okay";
126	pinctrl-0 = <&eth_pins>;
127	pnictrl-names = "default";
128};
129