1/*
2 * NXP LPC32xx SoC
3 *
4 * Copyright 2012 Roland Stigge <stigge@antcom.de>
5 *
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13
14/include/ "skeleton.dtsi"
15
16/ {
17	compatible = "nxp,lpc3220";
18	interrupt-parent = <&mic>;
19
20	cpus {
21		#address-cells = <0>;
22		#size-cells = <0>;
23
24		cpu {
25			compatible = "arm,arm926ej-s";
26			device_type = "cpu";
27		};
28	};
29
30	ahb {
31		#address-cells = <1>;
32		#size-cells = <1>;
33		compatible = "simple-bus";
34		ranges = <0x20000000 0x20000000 0x30000000>;
35
36		/*
37		 * Enable either SLC or MLC
38		 */
39		slc: flash@20020000 {
40			compatible = "nxp,lpc3220-slc";
41			reg = <0x20020000 0x1000>;
42			status = "disabled";
43		};
44
45		mlc: flash@200a8000 {
46			compatible = "nxp,lpc3220-mlc";
47			reg = <0x200a8000 0x11000>;
48			interrupts = <11 0>;
49			status = "disabled";
50		};
51
52		dma@31000000 {
53			compatible = "arm,pl080", "arm,primecell";
54			reg = <0x31000000 0x1000>;
55			interrupts = <0x1c 0>;
56		};
57
58		/*
59		 * Enable either ohci or usbd (gadget)!
60		 */
61		ohci@31020000 {
62			compatible = "nxp,ohci-nxp", "usb-ohci";
63			reg = <0x31020000 0x300>;
64			interrupts = <0x3b 0>;
65			status = "disabled";
66		};
67
68		usbd@31020000 {
69			compatible = "nxp,lpc3220-udc";
70			reg = <0x31020000 0x300>;
71			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
72			status = "disabled";
73		};
74
75		clcd@31040000 {
76			compatible = "arm,pl110", "arm,primecell";
77			reg = <0x31040000 0x1000>;
78			interrupts = <0x0e 0>;
79			status = "disabled";
80		};
81
82		mac: ethernet@31060000 {
83			compatible = "nxp,lpc-eth";
84			reg = <0x31060000 0x1000>;
85			interrupts = <0x1d 0>;
86		};
87
88		apb {
89			#address-cells = <1>;
90			#size-cells = <1>;
91			compatible = "simple-bus";
92			ranges = <0x20000000 0x20000000 0x30000000>;
93
94			ssp0: ssp@20084000 {
95				compatible = "arm,pl022", "arm,primecell";
96				reg = <0x20084000 0x1000>;
97				interrupts = <0x14 0>;
98			};
99
100			spi1: spi@20088000 {
101				compatible = "nxp,lpc3220-spi";
102				reg = <0x20088000 0x1000>;
103			};
104
105			ssp1: ssp@2008c000 {
106				compatible = "arm,pl022", "arm,primecell";
107				reg = <0x2008c000 0x1000>;
108				interrupts = <0x15 0>;
109			};
110
111			spi2: spi@20090000 {
112				compatible = "nxp,lpc3220-spi";
113				reg = <0x20090000 0x1000>;
114			};
115
116			i2s0: i2s@20094000 {
117				compatible = "nxp,lpc3220-i2s";
118				reg = <0x20094000 0x1000>;
119			};
120
121			sd@20098000 {
122				compatible = "arm,pl18x", "arm,primecell";
123				reg = <0x20098000 0x1000>;
124				interrupts = <0x0f 0>, <0x0d 0>;
125				status = "disabled";
126			};
127
128			i2s1: i2s@2009C000 {
129				compatible = "nxp,lpc3220-i2s";
130				reg = <0x2009C000 0x1000>;
131			};
132
133			/* UART5 first since it is the default console, ttyS0 */
134			uart5: serial@40090000 {
135				/* actually, ns16550a w/ 64 byte fifos! */
136				compatible = "nxp,lpc3220-uart";
137				reg = <0x40090000 0x1000>;
138				interrupts = <9 0>;
139				clock-frequency = <13000000>;
140				reg-shift = <2>;
141				status = "disabled";
142			};
143
144			uart3: serial@40080000 {
145				compatible = "nxp,lpc3220-uart";
146				reg = <0x40080000 0x1000>;
147				interrupts = <7 0>;
148				clock-frequency = <13000000>;
149				reg-shift = <2>;
150				status = "disabled";
151			};
152
153			uart4: serial@40088000 {
154				compatible = "nxp,lpc3220-uart";
155				reg = <0x40088000 0x1000>;
156				interrupts = <8 0>;
157				clock-frequency = <13000000>;
158				reg-shift = <2>;
159				status = "disabled";
160			};
161
162			uart6: serial@40098000 {
163				compatible = "nxp,lpc3220-uart";
164				reg = <0x40098000 0x1000>;
165				interrupts = <10 0>;
166				clock-frequency = <13000000>;
167				reg-shift = <2>;
168				status = "disabled";
169			};
170
171			i2c1: i2c@400A0000 {
172				compatible = "nxp,pnx-i2c";
173				reg = <0x400A0000 0x100>;
174				interrupts = <0x33 0>;
175				#address-cells = <1>;
176				#size-cells = <0>;
177				pnx,timeout = <0x64>;
178			};
179
180			i2c2: i2c@400A8000 {
181				compatible = "nxp,pnx-i2c";
182				reg = <0x400A8000 0x100>;
183				interrupts = <0x32 0>;
184				#address-cells = <1>;
185				#size-cells = <0>;
186				pnx,timeout = <0x64>;
187			};
188
189			mpwm: mpwm@400E8000 {
190				compatible = "nxp,lpc3220-motor-pwm";
191				reg = <0x400E8000 0x78>;
192				status = "disabled";
193				#pwm-cells = <2>;
194			};
195
196			i2cusb: i2c@31020300 {
197				compatible = "nxp,pnx-i2c";
198				reg = <0x31020300 0x100>;
199				interrupts = <0x3f 0>;
200				#address-cells = <1>;
201				#size-cells = <0>;
202				pnx,timeout = <0x64>;
203			};
204		};
205
206		fab {
207			#address-cells = <1>;
208			#size-cells = <1>;
209			compatible = "simple-bus";
210			ranges = <0x20000000 0x20000000 0x30000000>;
211
212			/*
213			 * MIC Interrupt controller includes:
214			 *   MIC @40008000
215			 *   SIC1 @4000C000
216			 *   SIC2 @40010000
217			 */
218			mic: interrupt-controller@40008000 {
219				compatible = "nxp,lpc3220-mic";
220				interrupt-controller;
221				reg = <0x40008000 0xC000>;
222				#interrupt-cells = <2>;
223			};
224
225			uart1: serial@40014000 {
226				compatible = "nxp,lpc3220-hsuart";
227				reg = <0x40014000 0x1000>;
228				interrupts = <26 0>;
229				status = "disabled";
230			};
231
232			uart2: serial@40018000 {
233				compatible = "nxp,lpc3220-hsuart";
234				reg = <0x40018000 0x1000>;
235				interrupts = <25 0>;
236				status = "disabled";
237			};
238
239			uart7: serial@4001c000 {
240				compatible = "nxp,lpc3220-hsuart";
241				reg = <0x4001c000 0x1000>;
242				interrupts = <24 0>;
243				status = "disabled";
244			};
245
246			rtc@40024000 {
247				compatible = "nxp,lpc3220-rtc";
248				reg = <0x40024000 0x1000>;
249				interrupts = <0x34 0>;
250			};
251
252			gpio: gpio@40028000 {
253				compatible = "nxp,lpc3220-gpio";
254				reg = <0x40028000 0x1000>;
255				gpio-controller;
256				#gpio-cells = <3>; /* bank, pin, flags */
257			};
258
259			watchdog@4003C000 {
260				compatible = "nxp,pnx4008-wdt";
261				reg = <0x4003C000 0x1000>;
262			};
263
264			/*
265			 * TSC vs. ADC: Since those two share the same
266			 * hardware, you need to choose from one of the
267			 * following two and do 'status = "okay";' for one of
268			 * them
269			 */
270
271			adc@40048000 {
272				compatible = "nxp,lpc3220-adc";
273				reg = <0x40048000 0x1000>;
274				interrupts = <0x27 0>;
275				status = "disabled";
276			};
277
278			tsc@40048000 {
279				compatible = "nxp,lpc3220-tsc";
280				reg = <0x40048000 0x1000>;
281				interrupts = <0x27 0>;
282				status = "disabled";
283			};
284
285			key@40050000 {
286				compatible = "nxp,lpc3220-key";
287				reg = <0x40050000 0x1000>;
288				interrupts = <54 0>;
289				status = "disabled";
290			};
291
292			pwm: pwm@4005C000 {
293				compatible = "nxp,lpc3220-pwm";
294				reg = <0x4005C000 0x8>;
295				status = "disabled";
296			};
297		};
298	};
299};
300