1/dts-v1/;
2
3#include "kirkwood-nsa3x0-common.dtsi"
4
5/*
6 * There are at least two different NSA310 designs. This variant does
7 * not have the red USB Led.
8 */
9
10/ {
11	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
12
13	memory {
14		device_type = "memory";
15		reg = <0x00000000 0x10000000>;
16	};
17
18	chosen {
19		bootargs = "console=ttyS0,115200";
20		stdout-path = &uart0;
21	};
22
23	ocp@f1000000 {
24		pinctrl: pin-controller@10000 {
25			pinctrl-names = "default";
26
27			pmx_led_esata_green: pmx-led-esata-green {
28				marvell,pins = "mpp12";
29				marvell,function = "gpio";
30			};
31
32			pmx_led_esata_red: pmx-led-esata-red {
33				marvell,pins = "mpp13";
34				marvell,function = "gpio";
35			};
36
37			pmx_led_usb_green: pmx-led-usb-green {
38				marvell,pins = "mpp15";
39				marvell,function = "gpio";
40			};
41
42			pmx_led_sys_green: pmx-led-sys-green {
43				marvell,pins = "mpp28";
44				marvell,function = "gpio";
45			};
46
47			pmx_led_sys_red: pmx-led-sys-red {
48				marvell,pins = "mpp29";
49				marvell,function = "gpio";
50			};
51
52			pmx_led_hdd_green: pmx-led-hdd-green {
53				marvell,pins = "mpp41";
54				marvell,function = "gpio";
55			};
56
57			pmx_led_hdd_red: pmx-led-hdd-red {
58				marvell,pins = "mpp42";
59				marvell,function = "gpio";
60			};
61
62		};
63
64		i2c@11000 {
65			status = "okay";
66
67			lm85: lm85@2e {
68				compatible = "national,lm85";
69				reg = <0x2e>;
70			};
71		};
72	};
73
74	gpio-leds {
75		compatible = "gpio-leds";
76
77		green-sys {
78			label = "nsa310:green:sys";
79			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
80		};
81		red-sys {
82			label = "nsa310:red:sys";
83			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
84		};
85		green-hdd {
86			label = "nsa310:green:hdd";
87			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
88		};
89		red-hdd {
90			label = "nsa310:red:hdd";
91			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
92		};
93		green-esata {
94			label = "nsa310:green:esata";
95			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
96		};
97		red-esata {
98			label = "nsa310:red:esata";
99			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
100		};
101		green-usb {
102			label = "nsa310:green:usb";
103			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
104		};
105		green-copy {
106			label = "nsa310:green:copy";
107			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
108		};
109		red-copy {
110			label = "nsa310:red:copy";
111			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
112		};
113	};
114};
115