1/*
2 * Device Tree for the ARM Integrator/CP platform
3 */
4
5/dts-v1/;
6/include/ "integrator.dtsi"
7
8/ {
9	model = "ARM Integrator/CP";
10	compatible = "arm,integrator-cp";
11
12	chosen {
13		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
14	};
15
16	/*
17	 * The Integrator/CP overall clocking architecture can be found in
18	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
19	 * appear to illustrate the layout used in most configurations.
20	 */
21
22	/* The codec chrystal operates at 24.576 MHz */
23	xtal_codec: xtal24.576@24.576M {
24		#clock-cells = <0>;
25		compatible = "fixed-clock";
26		clock-frequency = <24576000>;
27	};
28
29	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
30	aaci_bitclk: aaci_bitclk@12.288M {
31		#clock-cells = <0>;
32		compatible = "fixed-factor-clock";
33		clock-div = <2>;
34		clock-mult = <1>;
35		clocks = <&xtal_codec>;
36	};
37
38	/* This is a 25MHz chrystal on the base board */
39	xtal25mhz: xtal25mhz@25M {
40		#clock-cells = <0>;
41		compatible = "fixed-clock";
42		clock-frequency = <25000000>;
43	};
44
45	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
46	uartclk: uartclk@14.74M {
47		#clock-cells = <0>;
48		compatible = "fixed-clock";
49		clock-frequency = <14745600>;
50	};
51
52	/* Actually sysclk I think */
53	pclk: pclk@0 {
54		#clock-cells = <0>;
55		compatible = "fixed-clock";
56		clock-frequency = <0>;
57	};
58
59	core-module@10000000 {
60		/* 24 MHz chrystal on the core module */
61		xtal24mhz: xtal24mhz@24M {
62			#clock-cells = <0>;
63			compatible = "fixed-clock";
64			clock-frequency = <24000000>;
65		};
66
67		/*
68		 * External oscillator on the core module, usually used
69		 * to drive video circuitry. Driven from the 24MHz clock.
70		 */
71		auxosc: cm_aux_osc@25M {
72			#clock-cells = <0>;
73			compatible = "arm,integrator-cm-auxosc";
74			clocks = <&xtal24mhz>;
75		};
76
77		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
78		kmiclk: kmiclk@1M {
79			#clock-cells = <0>;
80			compatible = "fixed-factor-clock";
81			clock-div = <3>;
82			clock-mult = <1>;
83			clocks = <&xtal24mhz>;
84		};
85
86		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
87		timclk: timclk@1M {
88			#clock-cells = <0>;
89			compatible = "fixed-factor-clock";
90			clock-div = <24>;
91			clock-mult = <1>;
92			clocks = <&xtal24mhz>;
93		};
94	};
95
96	syscon {
97		compatible = "arm,integrator-cp-syscon";
98		reg = <0xcb000000 0x100>;
99	};
100
101	timer0: timer@13000000 {
102		/* TIMER0 runs directly on the 25MHz chrystal */
103		compatible = "arm,integrator-cp-timer";
104		clocks = <&xtal25mhz>;
105	};
106
107	timer1: timer@13000100 {
108		/* TIMER1 runs @ 1MHz */
109		compatible = "arm,integrator-cp-timer";
110		clocks = <&timclk>;
111	};
112
113	timer2: timer@13000200 {
114		/* TIMER2 runs @ 1MHz */
115		compatible = "arm,integrator-cp-timer";
116		clocks = <&timclk>;
117	};
118
119	pic: pic@14000000 {
120		valid-mask = <0x1fc003ff>;
121	};
122
123	cic: cic@10000040 {
124		compatible = "arm,versatile-fpga-irq";
125		#interrupt-cells = <1>;
126		interrupt-controller;
127		reg = <0x10000040 0x100>;
128		clear-mask = <0xffffffff>;
129		valid-mask = <0x00000007>;
130	};
131
132	/* The SIC is cascaded off IRQ 26 on the PIC */
133	sic: sic@ca000000 {
134		compatible = "arm,versatile-fpga-irq";
135		interrupt-parent = <&pic>;
136		interrupts = <26>;
137		#interrupt-cells = <1>;
138		interrupt-controller;
139		reg = <0xca000000 0x100>;
140		clear-mask = <0x00000fff>;
141		valid-mask = <0x00000fff>;
142	};
143
144	ethernet@c8000000 {
145		compatible = "smsc,lan91c111";
146		reg = <0xc8000000 0x10>;
147		interrupt-parent = <&pic>;
148		interrupts = <27>;
149	};
150
151	fpga {
152		/*
153		 * These PrimeCells are at the same location and using
154		 * the same interrupts in all Integrators, but in the CP
155		 * slightly newer versions are deployed.
156		 */
157		rtc@15000000 {
158			compatible = "arm,pl031", "arm,primecell";
159			clocks = <&pclk>;
160			clock-names = "apb_pclk";
161		};
162
163		uart@16000000 {
164			compatible = "arm,pl011", "arm,primecell";
165			clocks = <&uartclk>, <&pclk>;
166			clock-names = "uartclk", "apb_pclk";
167		};
168
169		uart@17000000 {
170			compatible = "arm,pl011", "arm,primecell";
171			clocks = <&uartclk>, <&pclk>;
172			clock-names = "uartclk", "apb_pclk";
173		};
174
175		kmi@18000000 {
176			compatible = "arm,pl050", "arm,primecell";
177			clocks = <&kmiclk>, <&pclk>;
178			clock-names = "KMIREFCLK", "apb_pclk";
179		};
180
181		kmi@19000000 {
182			compatible = "arm,pl050", "arm,primecell";
183			clocks = <&kmiclk>, <&pclk>;
184			clock-names = "KMIREFCLK", "apb_pclk";
185		};
186
187		/*
188		 * These PrimeCells are only available on the Integrator/CP
189		 */
190		mmc@1c000000 {
191			compatible = "arm,pl180", "arm,primecell";
192			reg = <0x1c000000 0x1000>;
193			interrupts = <23 24>;
194			max-frequency = <515633>;
195			clocks = <&uartclk>, <&pclk>;
196			clock-names = "mclk", "apb_pclk";
197		};
198
199		aaci@1d000000 {
200			compatible = "arm,pl041", "arm,primecell";
201			reg = <0x1d000000 0x1000>;
202			interrupts = <25>;
203			clocks = <&pclk>;
204			clock-names = "apb_pclk";
205		};
206
207		clcd@c0000000 {
208			compatible = "arm,pl110", "arm,primecell";
209			reg = <0xC0000000 0x1000>;
210			interrupts = <22>;
211			clocks = <&auxosc>, <&pclk>;
212			clock-names = "clcd", "apb_pclk";
213		};
214	};
215};
216