1/*
2 * Copyright 2012 Steffen Trumtrar, Pengutronix
3 *
4 * based on imx27.dtsi
5 *
6 * This program is free software; you can redistribute it and/or modify it under
7 * the terms of the GNU General Public License version 2 as published by the
8 * Free Software Foundation.
9 */
10
11#include "skeleton.dtsi"
12#include "imx35-pinfunc.h"
13
14/ {
15	aliases {
16		ethernet0 = &fec;
17		gpio0 = &gpio1;
18		gpio1 = &gpio2;
19		gpio2 = &gpio3;
20		serial0 = &uart1;
21		serial1 = &uart2;
22		serial2 = &uart3;
23		spi0 = &spi1;
24		spi1 = &spi2;
25	};
26
27	cpus {
28		#address-cells = <0>;
29		#size-cells = <0>;
30
31		cpu {
32			compatible = "arm,arm1136";
33			device_type = "cpu";
34		};
35	};
36
37	avic: avic-interrupt-controller@68000000 {
38		compatible = "fsl,imx35-avic", "fsl,avic";
39		interrupt-controller;
40		#interrupt-cells = <1>;
41		reg = <0x68000000 0x10000000>;
42	};
43
44	soc {
45		#address-cells = <1>;
46		#size-cells = <1>;
47		compatible = "simple-bus";
48		interrupt-parent = <&avic>;
49		ranges;
50
51		L2: l2-cache@30000000 {
52			compatible = "arm,l210-cache";
53			reg = <0x30000000 0x1000>;
54			cache-unified;
55			cache-level = <2>;
56		};
57
58		aips1: aips@43f00000 {
59			compatible = "fsl,aips", "simple-bus";
60			#address-cells = <1>;
61			#size-cells = <1>;
62			reg = <0x43f00000 0x100000>;
63			ranges;
64
65			i2c1: i2c@43f80000 {
66				#address-cells = <1>;
67				#size-cells = <0>;
68				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
69				reg = <0x43f80000 0x4000>;
70				clocks = <&clks 51>;
71				clock-names = "ipg_per";
72				interrupts = <10>;
73				status = "disabled";
74			};
75
76			i2c3: i2c@43f84000 {
77				#address-cells = <1>;
78				#size-cells = <0>;
79				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
80				reg = <0x43f84000 0x4000>;
81				clocks = <&clks 53>;
82				clock-names = "ipg_per";
83				interrupts = <3>;
84				status = "disabled";
85			};
86
87			uart1: serial@43f90000 {
88				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
89				reg = <0x43f90000 0x4000>;
90				clocks = <&clks 9>, <&clks 70>;
91				clock-names = "ipg", "per";
92				interrupts = <45>;
93				status = "disabled";
94			};
95
96			uart2: serial@43f94000 {
97				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
98				reg = <0x43f94000 0x4000>;
99				clocks = <&clks 9>, <&clks 71>;
100				clock-names = "ipg", "per";
101				interrupts = <32>;
102				status = "disabled";
103			};
104
105			i2c2: i2c@43f98000 {
106				#address-cells = <1>;
107				#size-cells = <0>;
108				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
109				reg = <0x43f98000 0x4000>;
110				clocks = <&clks 52>;
111				clock-names = "ipg_per";
112				interrupts = <4>;
113				status = "disabled";
114			};
115
116			ssi1: ssi@43fa0000 {
117				#sound-dai-cells = <0>;
118				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
119				reg = <0x43fa0000 0x4000>;
120				interrupts = <11>;
121				clocks = <&clks 68>;
122				dmas = <&sdma 28 0 0>,
123				       <&sdma 29 0 0>;
124				dma-names = "rx", "tx";
125				fsl,fifo-depth = <15>;
126				status = "disabled";
127			};
128
129			spi1: cspi@43fa4000 {
130				#address-cells = <1>;
131				#size-cells = <0>;
132				compatible = "fsl,imx35-cspi";
133				reg = <0x43fa4000 0x4000>;
134				clocks = <&clks 35 &clks 35>;
135				clock-names = "ipg", "per";
136				interrupts = <14>;
137				status = "disabled";
138			};
139
140			iomuxc: iomuxc@43fac000 {
141				compatible = "fsl,imx35-iomuxc";
142				reg = <0x43fac000 0x4000>;
143			};
144		};
145
146		spba: spba-bus@50000000 {
147			compatible = "fsl,spba-bus", "simple-bus";
148			#address-cells = <1>;
149			#size-cells = <1>;
150			reg = <0x50000000 0x100000>;
151			ranges;
152
153			uart3: serial@5000c000 {
154				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
155				reg = <0x5000c000 0x4000>;
156				clocks = <&clks 9>, <&clks 72>;
157				clock-names = "ipg", "per";
158				interrupts = <18>;
159				status = "disabled";
160			};
161
162			spi2: cspi@50010000 {
163				#address-cells = <1>;
164				#size-cells = <0>;
165				compatible = "fsl,imx35-cspi";
166				reg = <0x50010000 0x4000>;
167				interrupts = <13>;
168				clocks = <&clks 36 &clks 36>;
169				clock-names = "ipg", "per";
170				status = "disabled";
171			};
172
173			fec: fec@50038000 {
174				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
175				reg = <0x50038000 0x4000>;
176				clocks = <&clks 46>, <&clks 8>;
177				clock-names = "ipg", "ahb";
178				interrupts = <57>;
179				status = "disabled";
180			};
181		};
182
183		aips2: aips@53f00000 {
184			compatible = "fsl,aips", "simple-bus";
185			#address-cells = <1>;
186			#size-cells = <1>;
187			reg = <0x53f00000 0x100000>;
188			ranges;
189
190			clks: ccm@53f80000 {
191				compatible = "fsl,imx35-ccm";
192				reg = <0x53f80000 0x4000>;
193				interrupts = <31>;
194				#clock-cells = <1>;
195			};
196
197			gpt: timer@53f90000 {
198				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
199				reg = <0x53f90000 0x4000>;
200				interrupts = <29>;
201				clocks = <&clks 9>, <&clks 50>;
202				clock-names = "ipg", "per";
203			};
204
205			gpio3: gpio@53fa4000 {
206				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
207				reg = <0x53fa4000 0x4000>;
208				interrupts = <56>;
209				gpio-controller;
210				#gpio-cells = <2>;
211				interrupt-controller;
212				#interrupt-cells = <2>;
213			};
214
215			esdhc1: esdhc@53fb4000 {
216				compatible = "fsl,imx35-esdhc";
217				reg = <0x53fb4000 0x4000>;
218				interrupts = <7>;
219				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
220				clock-names = "ipg", "ahb", "per";
221				status = "disabled";
222			};
223
224			esdhc2: esdhc@53fb8000 {
225				compatible = "fsl,imx35-esdhc";
226				reg = <0x53fb8000 0x4000>;
227				interrupts = <8>;
228				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
229				clock-names = "ipg", "ahb", "per";
230				status = "disabled";
231			};
232
233			esdhc3: esdhc@53fbc000 {
234				compatible = "fsl,imx35-esdhc";
235				reg = <0x53fbc000 0x4000>;
236				interrupts = <9>;
237				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
238				clock-names = "ipg", "ahb", "per";
239				status = "disabled";
240			};
241
242			audmux: audmux@53fc4000 {
243				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
244				reg = <0x53fc4000 0x4000>;
245				status = "disabled";
246			};
247
248			gpio1: gpio@53fcc000 {
249				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
250				reg = <0x53fcc000 0x4000>;
251				interrupts = <52>;
252				gpio-controller;
253				#gpio-cells = <2>;
254				interrupt-controller;
255				#interrupt-cells = <2>;
256			};
257
258			gpio2: gpio@53fd0000 {
259				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
260				reg = <0x53fd0000 0x4000>;
261				interrupts = <51>;
262				gpio-controller;
263				#gpio-cells = <2>;
264				interrupt-controller;
265				#interrupt-cells = <2>;
266			};
267
268			sdma: sdma@53fd4000 {
269				compatible = "fsl,imx35-sdma";
270				reg = <0x53fd4000 0x4000>;
271				clocks = <&clks 9>, <&clks 65>;
272				clock-names = "ipg", "ahb";
273				#dma-cells = <3>;
274				interrupts = <34>;
275				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
276			};
277
278			wdog: wdog@53fdc000 {
279				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
280				reg = <0x53fdc000 0x4000>;
281				clocks = <&clks 74>;
282				clock-names = "";
283				interrupts = <55>;
284			};
285
286			can1: can@53fe4000 {
287				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
288				reg = <0x53fe4000 0x1000>;
289				clocks = <&clks 33>, <&clks 33>;
290				clock-names = "ipg", "per";
291				interrupts = <43>;
292				status = "disabled";
293			};
294
295			can2: can@53fe8000 {
296				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
297				reg = <0x53fe8000 0x1000>;
298				clocks = <&clks 34>, <&clks 34>;
299				clock-names = "ipg", "per";
300				interrupts = <44>;
301				status = "disabled";
302			};
303
304			usbotg: usb@53ff4000 {
305				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
306				reg = <0x53ff4000 0x0200>;
307				interrupts = <37>;
308				clocks = <&clks 73>;
309				fsl,usbmisc = <&usbmisc 0>;
310				fsl,usbphy = <&usbphy0>;
311				status = "disabled";
312			};
313
314			usbhost1: usb@53ff4400 {
315				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
316				reg = <0x53ff4400 0x0200>;
317				interrupts = <35>;
318				clocks = <&clks 73>;
319				fsl,usbmisc = <&usbmisc 1>;
320				fsl,usbphy = <&usbphy1>;
321				dr_mode = "host";
322				status = "disabled";
323			};
324
325			usbmisc: usbmisc@53ff4600 {
326				#index-cells = <1>;
327				compatible = "fsl,imx35-usbmisc";
328				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
329				clock-names = "ipg", "ahb", "per";
330				reg = <0x53ff4600 0x00f>;
331			};
332		};
333
334		emi@80000000 { /* External Memory Interface */
335			compatible = "fsl,emi", "simple-bus";
336			#address-cells = <1>;
337			#size-cells = <1>;
338			reg = <0x80000000 0x40000000>;
339			ranges;
340
341			nfc: nand@bb000000 {
342				#address-cells = <1>;
343				#size-cells = <1>;
344				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
345				reg = <0xbb000000 0x2000>;
346				clocks = <&clks 29>;
347				clock-names = "";
348				interrupts = <33>;
349				status = "disabled";
350			};
351
352			weim: weim@b8002000 {
353				#address-cells = <2>;
354				#size-cells = <1>;
355				clocks = <&clks 0>;
356				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
357				reg = <0xb8002000 0x1000>;
358				ranges = <
359					0 0 0xa0000000 0x8000000
360					1 0 0xa8000000 0x8000000
361					2 0 0xb0000000 0x2000000
362					3 0 0xb2000000 0x2000000
363					4 0 0xb4000000 0x2000000
364					5 0 0xb6000000 0x2000000
365				>;
366				status = "disabled";
367			};
368		};
369	};
370
371	usbphy {
372		compatible = "simple-bus";
373		#address-cells = <1>;
374		#size-cells = <0>;
375
376		usbphy0: usb-phy@0 {
377			reg = <0>;
378			compatible = "usb-nop-xceiv";
379		};
380
381		usbphy1: usb-phy@1 {
382			reg = <1>;
383			compatible = "usb-nop-xceiv";
384		};
385	};
386};
387