1/*
2 * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include "skeleton.dtsi"
13#include "imx25-pinfunc.h"
14
15/ {
16	aliases {
17		ethernet0 = &fec;
18		gpio0 = &gpio1;
19		gpio1 = &gpio2;
20		gpio2 = &gpio3;
21		gpio3 = &gpio4;
22		i2c0 = &i2c1;
23		i2c1 = &i2c2;
24		i2c2 = &i2c3;
25		mmc0 = &esdhc1;
26		mmc1 = &esdhc2;
27		serial0 = &uart1;
28		serial1 = &uart2;
29		serial2 = &uart3;
30		serial3 = &uart4;
31		serial4 = &uart5;
32		spi0 = &spi1;
33		spi1 = &spi2;
34		spi2 = &spi3;
35		usb0 = &usbotg;
36		usb1 = &usbhost1;
37	};
38
39	cpus {
40		#address-cells = <0>;
41		#size-cells = <0>;
42
43		cpu {
44			compatible = "arm,arm926ej-s";
45			device_type = "cpu";
46		};
47	};
48
49	asic: asic-interrupt-controller@68000000 {
50		compatible = "fsl,imx25-asic", "fsl,avic";
51		interrupt-controller;
52		#interrupt-cells = <1>;
53		reg = <0x68000000 0x8000000>;
54	};
55
56	clocks {
57		#address-cells = <1>;
58		#size-cells = <0>;
59
60		osc {
61			compatible = "fsl,imx-osc", "fixed-clock";
62			#clock-cells = <0>;
63			clock-frequency = <24000000>;
64		};
65	};
66
67	soc {
68		#address-cells = <1>;
69		#size-cells = <1>;
70		compatible = "simple-bus";
71		interrupt-parent = <&asic>;
72		ranges;
73
74		aips@43f00000 { /* AIPS1 */
75			compatible = "fsl,aips-bus", "simple-bus";
76			#address-cells = <1>;
77			#size-cells = <1>;
78			reg = <0x43f00000 0x100000>;
79			ranges;
80
81			i2c1: i2c@43f80000 {
82				#address-cells = <1>;
83				#size-cells = <0>;
84				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
85				reg = <0x43f80000 0x4000>;
86				clocks = <&clks 48>;
87				clock-names = "";
88				interrupts = <3>;
89				status = "disabled";
90			};
91
92			i2c3: i2c@43f84000 {
93				#address-cells = <1>;
94				#size-cells = <0>;
95				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
96				reg = <0x43f84000 0x4000>;
97				clocks = <&clks 48>;
98				clock-names = "";
99				interrupts = <10>;
100				status = "disabled";
101			};
102
103			can1: can@43f88000 {
104				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
105				reg = <0x43f88000 0x4000>;
106				interrupts = <43>;
107				clocks = <&clks 75>, <&clks 75>;
108				clock-names = "ipg", "per";
109				status = "disabled";
110			};
111
112			can2: can@43f8c000 {
113				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
114				reg = <0x43f8c000 0x4000>;
115				interrupts = <44>;
116				clocks = <&clks 76>, <&clks 76>;
117				clock-names = "ipg", "per";
118				status = "disabled";
119			};
120
121			uart1: serial@43f90000 {
122				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
123				reg = <0x43f90000 0x4000>;
124				interrupts = <45>;
125				clocks = <&clks 120>, <&clks 57>;
126				clock-names = "ipg", "per";
127				status = "disabled";
128			};
129
130			uart2: serial@43f94000 {
131				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
132				reg = <0x43f94000 0x4000>;
133				interrupts = <32>;
134				clocks = <&clks 121>, <&clks 57>;
135				clock-names = "ipg", "per";
136				status = "disabled";
137			};
138
139			i2c2: i2c@43f98000 {
140				#address-cells = <1>;
141				#size-cells = <0>;
142				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
143				reg = <0x43f98000 0x4000>;
144				clocks = <&clks 48>;
145				clock-names = "";
146				interrupts = <4>;
147				status = "disabled";
148			};
149
150			owire@43f9c000 {
151				#address-cells = <1>;
152				#size-cells = <0>;
153				reg = <0x43f9c000 0x4000>;
154				clocks = <&clks 51>;
155				clock-names = "";
156				interrupts = <2>;
157				status = "disabled";
158			};
159
160			spi1: cspi@43fa4000 {
161				#address-cells = <1>;
162				#size-cells = <0>;
163				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
164				reg = <0x43fa4000 0x4000>;
165				clocks = <&clks 78>, <&clks 78>;
166				clock-names = "ipg", "per";
167				interrupts = <14>;
168				status = "disabled";
169			};
170
171			kpp: kpp@43fa8000 {
172				#address-cells = <1>;
173				#size-cells = <0>;
174				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
175				reg = <0x43fa8000 0x4000>;
176				clocks = <&clks 102>;
177				clock-names = "";
178				interrupts = <24>;
179				status = "disabled";
180			};
181
182			iomuxc: iomuxc@43fac000 {
183				compatible = "fsl,imx25-iomuxc";
184				reg = <0x43fac000 0x4000>;
185			};
186
187			audmux: audmux@43fb0000 {
188				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
189				reg = <0x43fb0000 0x4000>;
190				status = "disabled";
191			};
192		};
193
194		spba@50000000 {
195			compatible = "fsl,spba-bus", "simple-bus";
196			#address-cells = <1>;
197			#size-cells = <1>;
198			reg = <0x50000000 0x40000>;
199			ranges;
200
201			spi3: cspi@50004000 {
202				#address-cells = <1>;
203				#size-cells = <0>;
204				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
205				reg = <0x50004000 0x4000>;
206				interrupts = <0>;
207				clocks = <&clks 80>, <&clks 80>;
208				clock-names = "ipg", "per";
209				status = "disabled";
210			};
211
212			uart4: serial@50008000 {
213				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
214				reg = <0x50008000 0x4000>;
215				interrupts = <5>;
216				clocks = <&clks 123>, <&clks 57>;
217				clock-names = "ipg", "per";
218				status = "disabled";
219			};
220
221			uart3: serial@5000c000 {
222				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
223				reg = <0x5000c000 0x4000>;
224				interrupts = <18>;
225				clocks = <&clks 122>, <&clks 57>;
226				clock-names = "ipg", "per";
227				status = "disabled";
228			};
229
230			spi2: cspi@50010000 {
231				#address-cells = <1>;
232				#size-cells = <0>;
233				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
234				reg = <0x50010000 0x4000>;
235				clocks = <&clks 79>, <&clks 79>;
236				clock-names = "ipg", "per";
237				interrupts = <13>;
238				status = "disabled";
239			};
240
241			ssi2: ssi@50014000 {
242				#sound-dai-cells = <0>;
243				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
244				reg = <0x50014000 0x4000>;
245				interrupts = <11>;
246				clocks = <&clks 118>;
247				clock-names = "ipg";
248				dmas = <&sdma 24 1 0>,
249				       <&sdma 25 1 0>;
250				dma-names = "rx", "tx";
251				status = "disabled";
252			};
253
254			esai@50018000 {
255				reg = <0x50018000 0x4000>;
256				interrupts = <7>;
257			};
258
259			uart5: serial@5002c000 {
260				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
261				reg = <0x5002c000 0x4000>;
262				interrupts = <40>;
263				clocks = <&clks 124>, <&clks 57>;
264				clock-names = "ipg", "per";
265				status = "disabled";
266			};
267
268			tsc: tsc@50030000 {
269				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
270				reg = <0x50030000 0x4000>;
271				interrupts = <46>;
272				clocks = <&clks 119>;
273				clock-names = "ipg";
274				status = "disabled";
275			};
276
277			ssi1: ssi@50034000 {
278				#sound-dai-cells = <0>;
279				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
280				reg = <0x50034000 0x4000>;
281				interrupts = <12>;
282				clocks = <&clks 117>;
283				clock-names = "ipg";
284				dmas = <&sdma 28 1 0>,
285				       <&sdma 29 1 0>;
286				dma-names = "rx", "tx";
287				status = "disabled";
288			};
289
290			fec: ethernet@50038000 {
291				compatible = "fsl,imx25-fec";
292				reg = <0x50038000 0x4000>;
293				interrupts = <57>;
294				clocks = <&clks 88>, <&clks 65>;
295				clock-names = "ipg", "ahb";
296				status = "disabled";
297			};
298		};
299
300		aips@53f00000 { /* AIPS2 */
301			compatible = "fsl,aips-bus", "simple-bus";
302			#address-cells = <1>;
303			#size-cells = <1>;
304			reg = <0x53f00000 0x100000>;
305			ranges;
306
307			clks: ccm@53f80000 {
308				compatible = "fsl,imx25-ccm";
309				reg = <0x53f80000 0x4000>;
310				interrupts = <31>;
311				#clock-cells = <1>;
312			};
313
314			gpt4: timer@53f84000 {
315				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
316				reg = <0x53f84000 0x4000>;
317				clocks = <&clks 95>, <&clks 47>;
318				clock-names = "ipg", "per";
319				interrupts = <1>;
320			};
321
322			gpt3: timer@53f88000 {
323				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
324				reg = <0x53f88000 0x4000>;
325				clocks = <&clks 94>, <&clks 47>;
326				clock-names = "ipg", "per";
327				interrupts = <29>;
328			};
329
330			gpt2: timer@53f8c000 {
331				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
332				reg = <0x53f8c000 0x4000>;
333				clocks = <&clks 93>, <&clks 47>;
334				clock-names = "ipg", "per";
335				interrupts = <53>;
336			};
337
338			gpt1: timer@53f90000 {
339				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
340				reg = <0x53f90000 0x4000>;
341				clocks = <&clks 92>, <&clks 47>;
342				clock-names = "ipg", "per";
343				interrupts = <54>;
344			};
345
346			epit1: timer@53f94000 {
347				compatible = "fsl,imx25-epit";
348				reg = <0x53f94000 0x4000>;
349				interrupts = <28>;
350			};
351
352			epit2: timer@53f98000 {
353				compatible = "fsl,imx25-epit";
354				reg = <0x53f98000 0x4000>;
355				interrupts = <27>;
356			};
357
358			gpio4: gpio@53f9c000 {
359				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
360				reg = <0x53f9c000 0x4000>;
361				interrupts = <23>;
362				gpio-controller;
363				#gpio-cells = <2>;
364				interrupt-controller;
365				#interrupt-cells = <2>;
366			};
367
368			pwm2: pwm@53fa0000 {
369				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
370				#pwm-cells = <2>;
371				reg = <0x53fa0000 0x4000>;
372				clocks = <&clks 106>, <&clks 52>;
373				clock-names = "ipg", "per";
374				interrupts = <36>;
375			};
376
377			gpio3: gpio@53fa4000 {
378				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
379				reg = <0x53fa4000 0x4000>;
380				interrupts = <16>;
381				gpio-controller;
382				#gpio-cells = <2>;
383				interrupt-controller;
384				#interrupt-cells = <2>;
385			};
386
387			pwm3: pwm@53fa8000 {
388				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
389				#pwm-cells = <2>;
390				reg = <0x53fa8000 0x4000>;
391				clocks = <&clks 107>, <&clks 52>;
392				clock-names = "ipg", "per";
393				interrupts = <41>;
394			};
395
396			esdhc1: esdhc@53fb4000 {
397				compatible = "fsl,imx25-esdhc";
398				reg = <0x53fb4000 0x4000>;
399				interrupts = <9>;
400				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
401				clock-names = "ipg", "ahb", "per";
402				status = "disabled";
403			};
404
405			esdhc2: esdhc@53fb8000 {
406				compatible = "fsl,imx25-esdhc";
407				reg = <0x53fb8000 0x4000>;
408				interrupts = <8>;
409				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
410				clock-names = "ipg", "ahb", "per";
411				status = "disabled";
412			};
413
414			lcdc: lcdc@53fbc000 {
415				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
416				reg = <0x53fbc000 0x4000>;
417				interrupts = <39>;
418				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
419				clock-names = "ipg", "ahb", "per";
420				status = "disabled";
421			};
422
423			slcdc@53fc0000 {
424				reg = <0x53fc0000 0x4000>;
425				interrupts = <38>;
426				status = "disabled";
427			};
428
429			pwm4: pwm@53fc8000 {
430				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
431				#pwm-cells = <2>;
432				reg = <0x53fc8000 0x4000>;
433				clocks = <&clks 108>, <&clks 52>;
434				clock-names = "ipg", "per";
435				interrupts = <42>;
436			};
437
438			gpio1: gpio@53fcc000 {
439				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
440				reg = <0x53fcc000 0x4000>;
441				interrupts = <52>;
442				gpio-controller;
443				#gpio-cells = <2>;
444				interrupt-controller;
445				#interrupt-cells = <2>;
446			};
447
448			gpio2: gpio@53fd0000 {
449				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
450				reg = <0x53fd0000 0x4000>;
451				interrupts = <51>;
452				gpio-controller;
453				#gpio-cells = <2>;
454				interrupt-controller;
455				#interrupt-cells = <2>;
456			};
457
458			sdma: sdma@53fd4000 {
459				compatible = "fsl,imx25-sdma";
460				reg = <0x53fd4000 0x4000>;
461				clocks = <&clks 112>, <&clks 68>;
462				clock-names = "ipg", "ahb";
463				#dma-cells = <3>;
464				interrupts = <34>;
465				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
466			};
467
468			wdog@53fdc000 {
469				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
470				reg = <0x53fdc000 0x4000>;
471				clocks = <&clks 126>;
472				clock-names = "";
473				interrupts = <55>;
474			};
475
476			pwm1: pwm@53fe0000 {
477				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
478				#pwm-cells = <2>;
479				reg = <0x53fe0000 0x4000>;
480				clocks = <&clks 105>, <&clks 52>;
481				clock-names = "ipg", "per";
482				interrupts = <26>;
483			};
484
485			iim: iim@53ff0000 {
486				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
487				reg = <0x53ff0000 0x4000>;
488				interrupts = <19>;
489				clocks = <&clks 99>;
490			};
491
492			usbotg: usb@53ff4000 {
493				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
494				reg = <0x53ff4000 0x0200>;
495				interrupts = <37>;
496				clocks = <&clks 70>;
497				fsl,usbmisc = <&usbmisc 0>;
498				fsl,usbphy = <&usbphy0>;
499				status = "disabled";
500			};
501
502			usbhost1: usb@53ff4400 {
503				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
504				reg = <0x53ff4400 0x0200>;
505				interrupts = <35>;
506				clocks = <&clks 70>;
507				fsl,usbmisc = <&usbmisc 1>;
508				fsl,usbphy = <&usbphy1>;
509				status = "disabled";
510			};
511
512			usbmisc: usbmisc@53ff4600 {
513				#index-cells = <1>;
514				compatible = "fsl,imx25-usbmisc";
515				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
516				clock-names = "ipg", "ahb", "per";
517				reg = <0x53ff4600 0x00f>;
518			};
519
520			dryice@53ffc000 {
521				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
522				reg = <0x53ffc000 0x4000>;
523				clocks = <&clks 81>;
524				clock-names = "ipg";
525				interrupts = <25>;
526			};
527		};
528
529		iram: sram@78000000 {
530			compatible = "mmio-sram";
531			reg = <0x78000000 0x20000>;
532		};
533
534		emi@80000000 {
535			compatible = "fsl,emi-bus", "simple-bus";
536			#address-cells = <1>;
537			#size-cells = <1>;
538			reg = <0x80000000 0x3b002000>;
539			ranges;
540
541			nfc: nand@bb000000 {
542				#address-cells = <1>;
543				#size-cells = <1>;
544
545				compatible = "fsl,imx25-nand";
546				reg = <0xbb000000 0x2000>;
547				clocks = <&clks 50>;
548				clock-names = "";
549				interrupts = <33>;
550				status = "disabled";
551			};
552		};
553	};
554
555	usbphy {
556		compatible = "simple-bus";
557		#address-cells = <1>;
558		#size-cells = <0>;
559
560		usbphy0: usb-phy@0 {
561			reg = <0>;
562			compatible = "usb-nop-xceiv";
563		};
564
565		usbphy1: usb-phy@1 {
566			reg = <1>;
567			compatible = "usb-nop-xceiv";
568		};
569	};
570};
571