1/*
2 * Samsung's Exynos4412 based Trats 2 board device tree source
3 *
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 *		http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Trats 2 board which is based on
8 * Samsung's Exynos4412 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15/dts-v1/;
16#include "exynos4412.dtsi"
17#include <dt-bindings/gpio/gpio.h>
18#include <dt-bindings/interrupt-controller/irq.h>
19
20/ {
21	model = "Samsung Trats 2 based on Exynos4412";
22	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
23
24	aliases {
25		i2c9 = &i2c_ak8975;
26		i2c10 = &i2c_cm36651;
27		i2c11 = &i2c_max77693;
28		i2c12 = &i2c_max77693_fuel;
29	};
30
31	memory {
32		reg =  <0x40000000 0x40000000>;
33	};
34
35	chosen {
36		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
37		stdout-path = &serial_2;
38	};
39
40	firmware@0204F000 {
41		compatible = "samsung,secure-firmware";
42		reg = <0x0204F000 0x1000>;
43	};
44
45	fixed-rate-clocks {
46		xxti {
47			compatible = "samsung,clock-xxti", "fixed-clock";
48			clock-frequency = <0>;
49		};
50
51		xusbxti {
52			compatible = "samsung,clock-xusbxti", "fixed-clock";
53			clock-frequency = <24000000>;
54		};
55	};
56
57	regulators {
58		compatible = "simple-bus";
59		#address-cells = <1>;
60		#size-cells = <0>;
61
62		cam_io_reg: voltage-regulator-1 {
63			compatible = "regulator-fixed";
64			regulator-name = "CAM_SENSOR_A";
65			regulator-min-microvolt = <2800000>;
66			regulator-max-microvolt = <2800000>;
67			gpio = <&gpm0 2 0>;
68			enable-active-high;
69		};
70
71		lcd_vdd3_reg: voltage-regulator-2 {
72			compatible = "regulator-fixed";
73			regulator-name = "LCD_VDD_2.2V";
74			regulator-min-microvolt = <2200000>;
75			regulator-max-microvolt = <2200000>;
76			gpio = <&gpc0 1 0>;
77			enable-active-high;
78		};
79
80		cam_af_reg: voltage-regulator-3 {
81			compatible = "regulator-fixed";
82			regulator-name = "CAM_AF";
83			regulator-min-microvolt = <2800000>;
84			regulator-max-microvolt = <2800000>;
85			gpio = <&gpm0 4 0>;
86			enable-active-high;
87		};
88
89		ps_als_reg: voltage-regulator-5 {
90			compatible = "regulator-fixed";
91			regulator-name = "LED_A_3.0V";
92			regulator-min-microvolt = <3000000>;
93			regulator-max-microvolt = <3000000>;
94			gpio = <&gpj0 5 0>;
95			enable-active-high;
96		};
97	};
98
99	gpio-keys {
100		compatible = "gpio-keys";
101
102		key-down {
103			gpios = <&gpx3 3 1>;
104			linux,code = <114>;
105			label = "volume down";
106			debounce-interval = <10>;
107		};
108
109		key-up {
110			gpios = <&gpx2 2 1>;
111			linux,code = <115>;
112			label = "volume up";
113			debounce-interval = <10>;
114		};
115
116		key-power {
117			gpios = <&gpx2 7 1>;
118			linux,code = <116>;
119			label = "power";
120			debounce-interval = <10>;
121			gpio-key,wakeup;
122		};
123
124		key-ok {
125			gpios = <&gpx0 1 1>;
126			linux,code = <139>;
127			label = "ok";
128			debounce-inteval = <10>;
129			gpio-key,wakeup;
130		};
131	};
132
133	adc: adc@126C0000 {
134		vdd-supply = <&ldo3_reg>;
135		status = "okay";
136	};
137
138	i2c@13890000 {
139		samsung,i2c-sda-delay = <100>;
140		samsung,i2c-slave-addr = <0x10>;
141		samsung,i2c-max-bus-freq = <400000>;
142		pinctrl-0 = <&i2c3_bus>;
143		pinctrl-names = "default";
144		status = "okay";
145
146		mms114-touchscreen@48 {
147			compatible = "melfas,mms114";
148			reg = <0x48>;
149			interrupt-parent = <&gpm2>;
150			interrupts = <3 2>;
151			x-size = <720>;
152			y-size = <1280>;
153			avdd-supply = <&ldo23_reg>;
154			vdd-supply = <&ldo24_reg>;
155		};
156	};
157
158	i2c_0: i2c@13860000 {
159		samsung,i2c-sda-delay = <100>;
160		samsung,i2c-slave-addr = <0x10>;
161		samsung,i2c-max-bus-freq = <400000>;
162		pinctrl-0 = <&i2c0_bus>;
163		pinctrl-names = "default";
164		status = "okay";
165
166		s5c73m3@3c {
167			compatible = "samsung,s5c73m3";
168			reg = <0x3c>;
169			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
170			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
171			vdd-int-supply = <&buck9_reg>;
172			vddio-cis-supply = <&ldo9_reg>;
173			vdda-supply = <&ldo17_reg>;
174			vddio-host-supply = <&ldo18_reg>;
175			vdd-af-supply = <&cam_af_reg>;
176			vdd-reg-supply = <&cam_io_reg>;
177			clock-frequency = <24000000>;
178			/* CAM_A_CLKOUT */
179			clocks = <&camera 0>;
180			clock-names = "cis_extclk";
181			port {
182				s5c73m3_ep: endpoint {
183					remote-endpoint = <&csis0_ep>;
184					data-lanes = <1 2 3 4>;
185				};
186			};
187		};
188	};
189
190	i2c@138A0000 {
191		samsung,i2c-sda-delay = <100>;
192		samsung,i2c-slave-addr = <0x10>;
193		samsung,i2c-max-bus-freq = <100000>;
194		pinctrl-0 = <&i2c4_bus>;
195		pinctrl-names = "default";
196		status = "okay";
197
198		wm1811: wm1811@1a {
199			compatible = "wlf,wm1811";
200			reg = <0x1a>;
201			clocks = <&pmu_system_controller 0>;
202			clock-names = "MCLK1";
203			DCVDD-supply = <&ldo3_reg>;
204			DBVDD1-supply = <&ldo3_reg>;
205			wlf,ldo1ena = <&gpj0 4 0>;
206		};
207	};
208
209	i2c@138D0000 {
210		samsung,i2c-sda-delay = <100>;
211		samsung,i2c-slave-addr = <0x10>;
212		samsung,i2c-max-bus-freq = <100000>;
213		pinctrl-0 = <&i2c7_bus>;
214		pinctrl-names = "default";
215		status = "okay";
216
217		max77686_pmic@09 {
218			compatible = "maxim,max77686";
219			interrupt-parent = <&gpx0>;
220			interrupts = <7 0>;
221			reg = <0x09>;
222			#clock-cells = <1>;
223
224			voltage-regulators {
225				ldo1_reg: ldo1 {
226					regulator-compatible = "LDO1";
227					regulator-name = "VALIVE_1.0V_AP";
228					regulator-min-microvolt = <1000000>;
229					regulator-max-microvolt = <1000000>;
230					regulator-always-on;
231				};
232
233				ldo2_reg: ldo2 {
234					regulator-compatible = "LDO2";
235					regulator-name = "VM1M2_1.2V_AP";
236					regulator-min-microvolt = <1200000>;
237					regulator-max-microvolt = <1200000>;
238					regulator-always-on;
239					regulator-state-mem {
240						regulator-on-in-suspend;
241					};
242				};
243
244				ldo3_reg: ldo3 {
245					regulator-compatible = "LDO3";
246					regulator-name = "VCC_1.8V_AP";
247					regulator-min-microvolt = <1800000>;
248					regulator-max-microvolt = <1800000>;
249					regulator-always-on;
250				};
251
252				ldo4_reg: ldo4 {
253					regulator-compatible = "LDO4";
254					regulator-name = "VCC_2.8V_AP";
255					regulator-min-microvolt = <2800000>;
256					regulator-max-microvolt = <2800000>;
257					regulator-always-on;
258				};
259
260				ldo5_reg: ldo5 {
261					regulator-compatible = "LDO5";
262					regulator-name = "VCC_1.8V_IO";
263					regulator-min-microvolt = <1800000>;
264					regulator-max-microvolt = <1800000>;
265					regulator-always-on;
266				};
267
268				ldo6_reg: ldo6 {
269					regulator-compatible = "LDO6";
270					regulator-name = "VMPLL_1.0V_AP";
271					regulator-min-microvolt = <1000000>;
272					regulator-max-microvolt = <1000000>;
273					regulator-always-on;
274					regulator-state-mem {
275						regulator-on-in-suspend;
276					};
277				};
278
279				ldo7_reg: ldo7 {
280					regulator-compatible = "LDO7";
281					regulator-name = "VPLL_1.0V_AP";
282					regulator-min-microvolt = <1000000>;
283					regulator-max-microvolt = <1000000>;
284					regulator-always-on;
285					regulator-state-mem {
286						regulator-on-in-suspend;
287					};
288				};
289
290				ldo8_reg: ldo8 {
291					regulator-compatible = "LDO8";
292					regulator-name = "VMIPI_1.0V";
293					regulator-min-microvolt = <1000000>;
294					regulator-max-microvolt = <1000000>;
295					regulator-state-mem {
296						regulator-off-in-suspend;
297					};
298				};
299
300				ldo9_reg: ldo9 {
301					regulator-compatible = "LDO9";
302					regulator-name = "CAM_ISP_MIPI_1.2V";
303					regulator-min-microvolt = <1200000>;
304					regulator-max-microvolt = <1200000>;
305				};
306
307				ldo10_reg: ldo10 {
308					regulator-compatible = "LDO10";
309					regulator-name = "VMIPI_1.8V";
310					regulator-min-microvolt = <1800000>;
311					regulator-max-microvolt = <1800000>;
312					regulator-state-mem {
313						regulator-off-in-suspend;
314					};
315				};
316
317				ldo11_reg: ldo11 {
318					regulator-compatible = "LDO11";
319					regulator-name = "VABB1_1.95V";
320					regulator-min-microvolt = <1950000>;
321					regulator-max-microvolt = <1950000>;
322					regulator-always-on;
323					regulator-state-mem {
324						regulator-off-in-suspend;
325					};
326				};
327
328				ldo12_reg: ldo12 {
329					regulator-compatible = "LDO12";
330					regulator-name = "VUOTG_3.0V";
331					regulator-min-microvolt = <3000000>;
332					regulator-max-microvolt = <3000000>;
333					regulator-state-mem {
334						regulator-off-in-suspend;
335					};
336				};
337
338				ldo13_reg: ldo13 {
339					regulator-compatible = "LDO13";
340					regulator-name = "NFC_AVDD_1.8V";
341					regulator-min-microvolt = <1800000>;
342					regulator-max-microvolt = <1800000>;
343				};
344
345				ldo14_reg: ldo14 {
346					regulator-compatible = "LDO14";
347					regulator-name = "VABB2_1.95V";
348					regulator-min-microvolt = <1950000>;
349					regulator-max-microvolt = <1950000>;
350					regulator-always-on;
351					regulator-state-mem {
352						regulator-off-in-suspend;
353					};
354				};
355
356				ldo15_reg: ldo15 {
357					regulator-compatible = "LDO15";
358					regulator-name = "VHSIC_1.0V";
359					regulator-min-microvolt = <1000000>;
360					regulator-max-microvolt = <1000000>;
361					regulator-state-mem {
362						regulator-on-in-suspend;
363					};
364				};
365
366				ldo16_reg: ldo16 {
367					regulator-compatible = "LDO16";
368					regulator-name = "VHSIC_1.8V";
369					regulator-min-microvolt = <1800000>;
370					regulator-max-microvolt = <1800000>;
371					regulator-state-mem {
372						regulator-on-in-suspend;
373					};
374				};
375
376				ldo17_reg: ldo17 {
377					regulator-compatible = "LDO17";
378					regulator-name = "CAM_SENSOR_CORE_1.2V";
379					regulator-min-microvolt = <1200000>;
380					regulator-max-microvolt = <1200000>;
381				};
382
383				ldo18_reg: ldo18 {
384					regulator-compatible = "LDO18";
385					regulator-name = "CAM_ISP_SEN_IO_1.8V";
386					regulator-min-microvolt = <1800000>;
387					regulator-max-microvolt = <1800000>;
388				};
389
390				ldo19_reg: ldo19 {
391					regulator-compatible = "LDO19";
392					regulator-name = "VT_CAM_1.8V";
393					regulator-min-microvolt = <1800000>;
394					regulator-max-microvolt = <1800000>;
395				};
396
397				ldo20_reg: ldo20 {
398					regulator-compatible = "LDO20";
399					regulator-name = "VDDQ_PRE_1.8V";
400					regulator-min-microvolt = <1800000>;
401					regulator-max-microvolt = <1800000>;
402				};
403
404				ldo21_reg: ldo21 {
405					regulator-compatible = "LDO21";
406					regulator-name = "VTF_2.8V";
407					regulator-min-microvolt = <2800000>;
408					regulator-max-microvolt = <2800000>;
409					maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
410				};
411
412				ldo22_reg: ldo22 {
413					regulator-compatible = "LDO22";
414					regulator-name = "VMEM_VDD_2.8V";
415					regulator-min-microvolt = <2800000>;
416					regulator-max-microvolt = <2800000>;
417					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
418				};
419
420				ldo23_reg: ldo23 {
421					regulator-compatible = "LDO23";
422					regulator-name = "TSP_AVDD_3.3V";
423					regulator-min-microvolt = <3300000>;
424					regulator-max-microvolt = <3300000>;
425				};
426
427				ldo24_reg: ldo24 {
428					regulator-compatible = "LDO24";
429					regulator-name = "TSP_VDD_1.8V";
430					regulator-min-microvolt = <1800000>;
431					regulator-max-microvolt = <1800000>;
432				};
433
434				ldo25_reg: ldo25 {
435					regulator-compatible = "LDO25";
436					regulator-name = "LCD_VCC_3.3V";
437					regulator-min-microvolt = <2800000>;
438					regulator-max-microvolt = <2800000>;
439				};
440
441				ldo26_reg: ldo26 {
442					regulator-compatible = "LDO26";
443					regulator-name = "MOTOR_VCC_3.0V";
444					regulator-min-microvolt = <3000000>;
445					regulator-max-microvolt = <3000000>;
446				};
447
448				buck1_reg: buck1 {
449					regulator-compatible = "BUCK1";
450					regulator-name = "vdd_mif";
451					regulator-min-microvolt = <850000>;
452					regulator-max-microvolt = <1100000>;
453					regulator-always-on;
454					regulator-boot-on;
455					regulator-state-mem {
456						regulator-off-in-suspend;
457					};
458				};
459
460				buck2_reg: buck2 {
461					regulator-compatible = "BUCK2";
462					regulator-name = "vdd_arm";
463					regulator-min-microvolt = <850000>;
464					regulator-max-microvolt = <1500000>;
465					regulator-always-on;
466					regulator-boot-on;
467					regulator-state-mem {
468						regulator-on-in-suspend;
469					};
470				};
471
472				buck3_reg: buck3 {
473					regulator-compatible = "BUCK3";
474					regulator-name = "vdd_int";
475					regulator-min-microvolt = <850000>;
476					regulator-max-microvolt = <1150000>;
477					regulator-always-on;
478					regulator-boot-on;
479					regulator-state-mem {
480						regulator-off-in-suspend;
481					};
482				};
483
484				buck4_reg: buck4 {
485					regulator-compatible = "BUCK4";
486					regulator-name = "vdd_g3d";
487					regulator-min-microvolt = <850000>;
488					regulator-max-microvolt = <1150000>;
489					regulator-boot-on;
490					regulator-state-mem {
491						regulator-off-in-suspend;
492					};
493				};
494
495				buck5_reg: buck5 {
496					regulator-compatible = "BUCK5";
497					regulator-name = "VMEM_1.2V_AP";
498					regulator-min-microvolt = <1200000>;
499					regulator-max-microvolt = <1200000>;
500					regulator-always-on;
501				};
502
503				buck6_reg: buck6 {
504					regulator-compatible = "BUCK6";
505					regulator-name = "VCC_SUB_1.35V";
506					regulator-min-microvolt = <1350000>;
507					regulator-max-microvolt = <1350000>;
508					regulator-always-on;
509				};
510
511				buck7_reg: buck7 {
512					regulator-compatible = "BUCK7";
513					regulator-name = "VCC_SUB_2.0V";
514					regulator-min-microvolt = <2000000>;
515					regulator-max-microvolt = <2000000>;
516					regulator-always-on;
517				};
518
519				buck8_reg: buck8 {
520					regulator-compatible = "BUCK8";
521					regulator-name = "VMEM_VDDF_3.0V";
522					regulator-min-microvolt = <2850000>;
523					regulator-max-microvolt = <2850000>;
524					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
525				};
526
527				buck9_reg: buck9 {
528					regulator-compatible = "BUCK9";
529					regulator-name = "CAM_ISP_CORE_1.2V";
530					regulator-min-microvolt = <1000000>;
531					regulator-max-microvolt = <1200000>;
532					maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
533				};
534			};
535		};
536	};
537
538	i2c_max77693: i2c-gpio-1 {
539		compatible = "i2c-gpio";
540		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
541		i2c-gpio,delay-us = <2>;
542		#address-cells = <1>;
543		#size-cells = <0>;
544		status = "okay";
545
546		max77693@66 {
547			compatible = "maxim,max77693";
548			interrupt-parent = <&gpx1>;
549			interrupts = <5 2>;
550			reg = <0x66>;
551
552			regulators {
553				esafeout1_reg: ESAFEOUT1@1 {
554					regulator-name = "ESAFEOUT1";
555				};
556				esafeout2_reg: ESAFEOUT2@2 {
557					regulator-name = "ESAFEOUT2";
558				};
559				charger_reg: CHARGER@0 {
560					regulator-name = "CHARGER";
561					regulator-min-microamp = <60000>;
562					regulator-max-microamp = <2580000>;
563				};
564			};
565
566			max77693_haptic {
567				compatible = "maxim,max77693-haptic";
568				haptic-supply = <&ldo26_reg>;
569				pwms = <&pwm 0 38022 0>;
570			};
571
572			charger {
573				compatible = "maxim,max77693-charger";
574
575				maxim,constant-microvolt = <4350000>;
576				maxim,min-system-microvolt = <3600000>;
577				maxim,thermal-regulation-celsius = <100>;
578				maxim,battery-overcurrent-microamp = <3500000>;
579				maxim,charge-input-threshold-microvolt = <4300000>;
580			};
581		};
582	};
583
584	i2c_max77693_fuel: i2c-gpio-3 {
585		compatible = "i2c-gpio";
586		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
587		i2c-gpio,delay-us = <2>;
588		#address-cells = <1>;
589		#size-cells = <0>;
590		status = "okay";
591
592		max77693-fuel-gauge@36 {
593			compatible = "maxim,max17047";
594			interrupt-parent = <&gpx2>;
595			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
596			reg = <0x36>;
597		};
598	};
599
600	mmc@12550000 {
601		num-slots = <1>;
602		broken-cd;
603		non-removable;
604		card-detect-delay = <200>;
605		vmmc-supply = <&ldo22_reg>;
606		clock-frequency = <400000000>;
607		samsung,dw-mshc-ciu-div = <0>;
608		samsung,dw-mshc-sdr-timing = <2 3>;
609		samsung,dw-mshc-ddr-timing = <1 2>;
610		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
611		pinctrl-names = "default";
612		status = "okay";
613		bus-width = <8>;
614		cap-mmc-highspeed;
615	};
616
617	sdhci@12530000 {
618		bus-width = <4>;
619		cd-gpios = <&gpx3 4 0>;
620		cd-inverted;
621		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
622		pinctrl-names = "default";
623		vmmc-supply = <&ldo21_reg>;
624		status = "okay";
625	};
626
627	serial@13800000 {
628		status = "okay";
629	};
630
631	serial@13810000 {
632		status = "okay";
633	};
634
635	serial@13820000 {
636		status = "okay";
637	};
638
639	serial@13830000 {
640		status = "okay";
641	};
642
643	tmu@100C0000 {
644		vtmu-supply = <&ldo10_reg>;
645		status = "okay";
646	};
647
648	i2c_ak8975: i2c-gpio-0 {
649		compatible = "i2c-gpio";
650		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
651		i2c-gpio,delay-us = <2>;
652		#address-cells = <1>;
653		#size-cells = <0>;
654		status = "okay";
655
656		ak8975@0c {
657			compatible = "asahi-kasei,ak8975";
658			reg = <0x0c>;
659			gpios = <&gpj0 7 0>;
660		};
661	};
662
663	i2c_cm36651: i2c-gpio-2 {
664		compatible = "i2c-gpio";
665		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
666		i2c-gpio,delay-us = <2>;
667		#address-cells = <1>;
668		#size-cells = <0>;
669
670		cm36651@18 {
671			compatible = "capella,cm36651";
672			reg = <0x18>;
673			interrupt-parent = <&gpx0>;
674			interrupts = <2 2>;
675			vled-supply = <&ps_als_reg>;
676		};
677	};
678
679	spi_1: spi@13930000 {
680		pinctrl-names = "default";
681		pinctrl-0 = <&spi1_bus>;
682		cs-gpios = <&gpb 5 0>;
683		status = "okay";
684
685		s5c73m3_spi: s5c73m3 {
686			compatible = "samsung,s5c73m3";
687			spi-max-frequency = <50000000>;
688			reg = <0>;
689			controller-data {
690				samsung,spi-feedback-delay = <2>;
691			};
692		};
693	};
694
695	pwm: pwm@139D0000 {
696		pinctrl-0 = <&pwm0_out>;
697		pinctrl-names = "default";
698		samsung,pwm-outputs = <0>;
699		status = "okay";
700	};
701
702	dsi_0: dsi@11C80000 {
703		vddcore-supply = <&ldo8_reg>;
704		vddio-supply = <&ldo10_reg>;
705		samsung,pll-clock-frequency = <24000000>;
706		status = "okay";
707
708		ports {
709			#address-cells = <1>;
710			#size-cells = <0>;
711
712			port@1 {
713				reg = <1>;
714
715				dsi_out: endpoint {
716					remote-endpoint = <&dsi_in>;
717					samsung,burst-clock-frequency = <500000000>;
718					samsung,esc-clock-frequency = <20000000>;
719				};
720			};
721		};
722
723		panel@0 {
724			compatible = "samsung,s6e8aa0";
725			reg = <0>;
726			vdd3-supply = <&lcd_vdd3_reg>;
727			vci-supply = <&ldo25_reg>;
728			reset-gpios = <&gpy4 5 0>;
729			power-on-delay= <50>;
730			reset-delay = <100>;
731			init-delay = <100>;
732			flip-horizontal;
733			flip-vertical;
734			panel-width-mm = <58>;
735			panel-height-mm = <103>;
736
737			display-timings {
738				timing-0 {
739					clock-frequency = <57153600>;
740					hactive = <720>;
741					vactive = <1280>;
742					hfront-porch = <5>;
743					hback-porch = <5>;
744					hsync-len = <5>;
745					vfront-porch = <13>;
746					vback-porch = <1>;
747					vsync-len = <2>;
748				};
749			};
750
751			port {
752				dsi_in: endpoint {
753					remote-endpoint = <&dsi_out>;
754				};
755			};
756		};
757	};
758
759	fimd@11c00000 {
760		status = "okay";
761	};
762
763	camera: camera {
764		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
765		pinctrl-names = "default";
766		status = "okay";
767		assigned-clocks = <&clock CLK_MOUT_CAM0>,
768				  <&clock CLK_MOUT_CAM1>;
769		assigned-clock-parents = <&clock CLK_XUSBXTI>,
770					 <&clock CLK_XUSBXTI>;
771
772		fimc_0: fimc@11800000 {
773			status = "okay";
774			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
775					<&clock CLK_SCLK_FIMC0>;
776			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
777			assigned-clock-rates = <0>, <176000000>;
778		};
779
780		fimc_1: fimc@11810000 {
781			status = "okay";
782			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
783					<&clock CLK_SCLK_FIMC1>;
784			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
785			assigned-clock-rates = <0>, <176000000>;
786		};
787
788		fimc_2: fimc@11820000 {
789			status = "okay";
790			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
791					<&clock CLK_SCLK_FIMC2>;
792			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
793			assigned-clock-rates = <0>, <176000000>;
794		};
795
796		fimc_3: fimc@11830000 {
797			status = "okay";
798			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
799					<&clock CLK_SCLK_FIMC3>;
800			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
801			assigned-clock-rates = <0>, <176000000>;
802		};
803
804		csis_0: csis@11880000 {
805			status = "okay";
806			vddcore-supply = <&ldo8_reg>;
807			vddio-supply = <&ldo10_reg>;
808			assigned-clocks = <&clock CLK_MOUT_CSIS0>,
809					<&clock CLK_SCLK_CSIS0>;
810			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
811			assigned-clock-rates = <0>, <176000000>;
812
813			/* Camera C (3) MIPI CSI-2 (CSIS0) */
814			port@3 {
815				reg = <3>;
816				csis0_ep: endpoint {
817					remote-endpoint = <&s5c73m3_ep>;
818					data-lanes = <1 2 3 4>;
819					samsung,csis-hs-settle = <12>;
820				};
821			};
822		};
823
824		csis_1: csis@11890000 {
825			status = "okay";
826			vddcore-supply = <&ldo8_reg>;
827			vddio-supply = <&ldo10_reg>;
828			assigned-clocks = <&clock CLK_MOUT_CSIS1>,
829					<&clock CLK_SCLK_CSIS1>;
830			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
831			assigned-clock-rates = <0>, <176000000>;
832
833			/* Camera D (4) MIPI CSI-2 (CSIS1) */
834			port@4 {
835				reg = <4>;
836				csis1_ep: endpoint {
837					remote-endpoint = <&is_s5k6a3_ep>;
838					data-lanes = <1>;
839					samsung,csis-hs-settle = <18>;
840					samsung,csis-wclk;
841				};
842			};
843		};
844
845		fimc_lite_0: fimc-lite@12390000 {
846			status = "okay";
847		};
848
849		fimc_lite_1: fimc-lite@123A0000 {
850			status = "okay";
851		};
852
853		fimc-is@12000000 {
854			pinctrl-0 = <&fimc_is_uart>;
855			pinctrl-names = "default";
856			status = "okay";
857
858			i2c1_isp: i2c-isp@12140000 {
859				pinctrl-0 = <&fimc_is_i2c1>;
860				pinctrl-names = "default";
861
862				s5k6a3@10 {
863					compatible = "samsung,s5k6a3";
864					reg = <0x10>;
865					svdda-supply = <&cam_io_reg>;
866					svddio-supply = <&ldo19_reg>;
867					afvdd-supply = <&ldo19_reg>;
868					clock-frequency = <24000000>;
869					/* CAM_B_CLKOUT */
870					clocks = <&camera 1>;
871					clock-names = "extclk";
872					samsung,camclk-out = <1>;
873					gpios = <&gpm1 6 0>;
874
875					port {
876						is_s5k6a3_ep: endpoint {
877							remote-endpoint = <&csis1_ep>;
878							data-lanes = <1>;
879						};
880					};
881				};
882			};
883		};
884	};
885
886	i2s0: i2s@03830000 {
887		pinctrl-0 = <&i2s0_bus>;
888		pinctrl-names = "default";
889		status = "okay";
890	};
891
892	sound {
893		compatible = "samsung,trats2-audio";
894		samsung,i2s-controller = <&i2s0>;
895		samsung,model = "Trats2";
896		samsung,audio-codec = <&wm1811>;
897		samsung,audio-routing =
898			"SPK", "SPKOUTLN",
899			"SPK", "SPKOUTLP",
900			"SPK", "SPKOUTRN",
901			"SPK", "SPKOUTRP";
902	};
903
904	exynos-usbphy@125B0000 {
905		status = "okay";
906	};
907
908	hsotg@12480000 {
909		vusb_d-supply = <&ldo15_reg>;
910		vusb_a-supply = <&ldo12_reg>;
911		dr_mode = "peripheral";
912		status = "okay";
913	};
914
915	thermistor-ap@0 {
916		compatible = "ntc,ncp15wb473";
917		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
918		pullup-ohm = <100000>;	 /* 100K */
919		pulldown-ohm = <100000>; /* 100K */
920		io-channels = <&adc 1>;  /* AP temperature */
921	};
922
923	thermistor-battery@1 {
924		compatible = "ntc,ncp15wb473";
925		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
926		pullup-ohm = <100000>;	 /* 100K */
927		pulldown-ohm = <100000>; /* 100K */
928		io-channels = <&adc 2>;  /* Battery temperature */
929	};
930
931	thermal-zones {
932		cpu_thermal: cpu-thermal {
933			cooling-maps {
934				map0 {
935				     /* Corresponds to 800MHz at freq_table */
936				     cooling-device = <&cpu0 7 7>;
937				};
938				map1 {
939				     /* Corresponds to 200MHz at freq_table */
940				     cooling-device = <&cpu0 13 13>;
941			       };
942		       };
943		};
944	};
945};
946
947&pmu_system_controller {
948	assigned-clocks = <&pmu_system_controller 0>;
949	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
950};
951
952&ppmu_dmc0 {
953	status = "okay";
954
955	events {
956		ppmu_dmc0_3: ppmu-event3-dmc0 {
957			event-name = "ppmu-event3-dmc0";
958		};
959	};
960};
961
962&ppmu_dmc1 {
963	status = "okay";
964
965	events {
966		ppmu_dmc1_3: ppmu-event3-dmc1 {
967			event-name = "ppmu-event3-dmc1";
968		};
969	};
970};
971
972&ppmu_leftbus {
973	status = "okay";
974
975	events {
976		ppmu_leftbus_3: ppmu-event3-leftbus {
977			event-name = "ppmu-event3-leftbus";
978		};
979	};
980};
981
982&ppmu_rightbus {
983	status = "okay";
984
985	events {
986		ppmu_rightbus_3: ppmu-event3-rightbus {
987			event-name = "ppmu-event3-rightbus";
988		};
989	};
990};
991
992&pinctrl_0 {
993	pinctrl-names = "default";
994	pinctrl-0 = <&sleep0>;
995
996	sleep0: sleep-states {
997		PIN_SLP(gpa0-0, INPUT, NONE);
998		PIN_SLP(gpa0-1, OUT0, NONE);
999		PIN_SLP(gpa0-2, INPUT, NONE);
1000		PIN_SLP(gpa0-3, INPUT, UP);
1001		PIN_SLP(gpa0-4, INPUT, NONE);
1002		PIN_SLP(gpa0-5, INPUT, DOWN);
1003		PIN_SLP(gpa0-6, INPUT, DOWN);
1004		PIN_SLP(gpa0-7, INPUT, UP);
1005
1006		PIN_SLP(gpa1-0, INPUT, DOWN);
1007		PIN_SLP(gpa1-1, INPUT, DOWN);
1008		PIN_SLP(gpa1-2, INPUT, DOWN);
1009		PIN_SLP(gpa1-3, INPUT, DOWN);
1010		PIN_SLP(gpa1-4, INPUT, DOWN);
1011		PIN_SLP(gpa1-5, INPUT, DOWN);
1012
1013		PIN_SLP(gpb-0, INPUT, NONE);
1014		PIN_SLP(gpb-1, INPUT, NONE);
1015		PIN_SLP(gpb-2, INPUT, NONE);
1016		PIN_SLP(gpb-3, INPUT, NONE);
1017		PIN_SLP(gpb-4, INPUT, DOWN);
1018		PIN_SLP(gpb-5, INPUT, UP);
1019		PIN_SLP(gpb-6, INPUT, DOWN);
1020		PIN_SLP(gpb-7, INPUT, DOWN);
1021
1022		PIN_SLP(gpc0-0, INPUT, DOWN);
1023		PIN_SLP(gpc0-1, INPUT, DOWN);
1024		PIN_SLP(gpc0-2, INPUT, DOWN);
1025		PIN_SLP(gpc0-3, INPUT, DOWN);
1026		PIN_SLP(gpc0-4, INPUT, DOWN);
1027
1028		PIN_SLP(gpc1-0, INPUT, NONE);
1029		PIN_SLP(gpc1-1, PREV, NONE);
1030		PIN_SLP(gpc1-2, INPUT, NONE);
1031		PIN_SLP(gpc1-3, INPUT, NONE);
1032		PIN_SLP(gpc1-4, INPUT, NONE);
1033
1034		PIN_SLP(gpd0-0, INPUT, DOWN);
1035		PIN_SLP(gpd0-1, INPUT, DOWN);
1036		PIN_SLP(gpd0-2, INPUT, NONE);
1037		PIN_SLP(gpd0-3, INPUT, NONE);
1038
1039		PIN_SLP(gpd1-0, INPUT, DOWN);
1040		PIN_SLP(gpd1-1, INPUT, DOWN);
1041		PIN_SLP(gpd1-2, INPUT, NONE);
1042		PIN_SLP(gpd1-3, INPUT, NONE);
1043
1044		PIN_SLP(gpf0-0, INPUT, NONE);
1045		PIN_SLP(gpf0-1, INPUT, NONE);
1046		PIN_SLP(gpf0-2, INPUT, DOWN);
1047		PIN_SLP(gpf0-3, INPUT, DOWN);
1048		PIN_SLP(gpf0-4, INPUT, NONE);
1049		PIN_SLP(gpf0-5, INPUT, DOWN);
1050		PIN_SLP(gpf0-6, INPUT, NONE);
1051		PIN_SLP(gpf0-7, INPUT, DOWN);
1052
1053		PIN_SLP(gpf1-0, INPUT, DOWN);
1054		PIN_SLP(gpf1-1, INPUT, DOWN);
1055		PIN_SLP(gpf1-2, INPUT, DOWN);
1056		PIN_SLP(gpf1-3, INPUT, DOWN);
1057		PIN_SLP(gpf1-4, INPUT, NONE);
1058		PIN_SLP(gpf1-5, INPUT, NONE);
1059		PIN_SLP(gpf1-6, INPUT, DOWN);
1060		PIN_SLP(gpf1-7, PREV, NONE);
1061
1062		PIN_SLP(gpf2-0, PREV, NONE);
1063		PIN_SLP(gpf2-1, INPUT, DOWN);
1064		PIN_SLP(gpf2-2, INPUT, DOWN);
1065		PIN_SLP(gpf2-3, INPUT, DOWN);
1066		PIN_SLP(gpf2-4, INPUT, DOWN);
1067		PIN_SLP(gpf2-5, INPUT, DOWN);
1068		PIN_SLP(gpf2-6, INPUT, NONE);
1069		PIN_SLP(gpf2-7, INPUT, NONE);
1070
1071		PIN_SLP(gpf3-0, INPUT, NONE);
1072		PIN_SLP(gpf3-1, PREV, NONE);
1073		PIN_SLP(gpf3-2, PREV, NONE);
1074		PIN_SLP(gpf3-3, PREV, NONE);
1075		PIN_SLP(gpf3-4, OUT1, NONE);
1076		PIN_SLP(gpf3-5, INPUT, DOWN);
1077
1078		PIN_SLP(gpj0-0, PREV, NONE);
1079		PIN_SLP(gpj0-1, PREV, NONE);
1080		PIN_SLP(gpj0-2, PREV, NONE);
1081		PIN_SLP(gpj0-3, INPUT, DOWN);
1082		PIN_SLP(gpj0-4, PREV, NONE);
1083		PIN_SLP(gpj0-5, PREV, NONE);
1084		PIN_SLP(gpj0-6, INPUT, DOWN);
1085		PIN_SLP(gpj0-7, INPUT, DOWN);
1086
1087		PIN_SLP(gpj1-0, INPUT, DOWN);
1088		PIN_SLP(gpj1-1, PREV, NONE);
1089		PIN_SLP(gpj1-2, PREV, NONE);
1090		PIN_SLP(gpj1-3, INPUT, DOWN);
1091		PIN_SLP(gpj1-4, INPUT, DOWN);
1092	};
1093};
1094
1095&pinctrl_1 {
1096	pinctrl-names = "default";
1097	pinctrl-0 = <&sleep1>;
1098
1099	sleep1: sleep-states {
1100		PIN_SLP(gpk0-0, PREV, NONE);
1101		PIN_SLP(gpk0-1, PREV, NONE);
1102		PIN_SLP(gpk0-2, OUT0, NONE);
1103		PIN_SLP(gpk0-3, PREV, NONE);
1104		PIN_SLP(gpk0-4, PREV, NONE);
1105		PIN_SLP(gpk0-5, PREV, NONE);
1106		PIN_SLP(gpk0-6, PREV, NONE);
1107
1108		PIN_SLP(gpk1-0, INPUT, DOWN);
1109		PIN_SLP(gpk1-1, INPUT, DOWN);
1110		PIN_SLP(gpk1-2, INPUT, DOWN);
1111		PIN_SLP(gpk1-3, PREV, NONE);
1112		PIN_SLP(gpk1-4, PREV, NONE);
1113		PIN_SLP(gpk1-5, PREV, NONE);
1114		PIN_SLP(gpk1-6, PREV, NONE);
1115
1116		PIN_SLP(gpk2-0, INPUT, DOWN);
1117		PIN_SLP(gpk2-1, INPUT, DOWN);
1118		PIN_SLP(gpk2-2, INPUT, DOWN);
1119		PIN_SLP(gpk2-3, INPUT, DOWN);
1120		PIN_SLP(gpk2-4, INPUT, DOWN);
1121		PIN_SLP(gpk2-5, INPUT, DOWN);
1122		PIN_SLP(gpk2-6, INPUT, DOWN);
1123
1124		PIN_SLP(gpk3-0, OUT0, NONE);
1125		PIN_SLP(gpk3-1, INPUT, NONE);
1126		PIN_SLP(gpk3-2, INPUT, DOWN);
1127		PIN_SLP(gpk3-3, INPUT, NONE);
1128		PIN_SLP(gpk3-4, INPUT, NONE);
1129		PIN_SLP(gpk3-5, INPUT, NONE);
1130		PIN_SLP(gpk3-6, INPUT, NONE);
1131
1132		PIN_SLP(gpl0-0, INPUT, DOWN);
1133		PIN_SLP(gpl0-1, INPUT, DOWN);
1134		PIN_SLP(gpl0-2, INPUT, DOWN);
1135		PIN_SLP(gpl0-3, INPUT, DOWN);
1136		PIN_SLP(gpl0-4, PREV, NONE);
1137		PIN_SLP(gpl0-6, PREV, NONE);
1138
1139		PIN_SLP(gpl1-0, INPUT, DOWN);
1140		PIN_SLP(gpl1-1, INPUT, DOWN);
1141		PIN_SLP(gpl2-0, INPUT, DOWN);
1142		PIN_SLP(gpl2-1, INPUT, DOWN);
1143		PIN_SLP(gpl2-2, INPUT, DOWN);
1144		PIN_SLP(gpl2-3, INPUT, DOWN);
1145		PIN_SLP(gpl2-4, INPUT, DOWN);
1146		PIN_SLP(gpl2-5, INPUT, DOWN);
1147		PIN_SLP(gpl2-6, PREV, NONE);
1148		PIN_SLP(gpl2-7, INPUT, DOWN);
1149
1150		PIN_SLP(gpm0-0, INPUT, DOWN);
1151		PIN_SLP(gpm0-1, INPUT, DOWN);
1152		PIN_SLP(gpm0-2, INPUT, DOWN);
1153		PIN_SLP(gpm0-3, INPUT, DOWN);
1154		PIN_SLP(gpm0-4, INPUT, DOWN);
1155		PIN_SLP(gpm0-5, INPUT, DOWN);
1156		PIN_SLP(gpm0-6, INPUT, DOWN);
1157		PIN_SLP(gpm0-7, INPUT, DOWN);
1158
1159		PIN_SLP(gpm1-0, INPUT, DOWN);
1160		PIN_SLP(gpm1-1, INPUT, DOWN);
1161		PIN_SLP(gpm1-2, INPUT, NONE);
1162		PIN_SLP(gpm1-3, INPUT, NONE);
1163		PIN_SLP(gpm1-4, INPUT, NONE);
1164		PIN_SLP(gpm1-5, INPUT, NONE);
1165		PIN_SLP(gpm1-6, INPUT, DOWN);
1166
1167		PIN_SLP(gpm2-0, INPUT, NONE);
1168		PIN_SLP(gpm2-1, INPUT, NONE);
1169		PIN_SLP(gpm2-2, INPUT, DOWN);
1170		PIN_SLP(gpm2-3, INPUT, DOWN);
1171		PIN_SLP(gpm2-4, INPUT, DOWN);
1172
1173		PIN_SLP(gpm3-0, PREV, NONE);
1174		PIN_SLP(gpm3-1, PREV, NONE);
1175		PIN_SLP(gpm3-2, PREV, NONE);
1176		PIN_SLP(gpm3-3, OUT1, NONE);
1177		PIN_SLP(gpm3-4, INPUT, DOWN);
1178		PIN_SLP(gpm3-5, INPUT, DOWN);
1179		PIN_SLP(gpm3-6, INPUT, DOWN);
1180		PIN_SLP(gpm3-7, INPUT, DOWN);
1181
1182		PIN_SLP(gpm4-0, INPUT, DOWN);
1183		PIN_SLP(gpm4-1, INPUT, DOWN);
1184		PIN_SLP(gpm4-2, INPUT, DOWN);
1185		PIN_SLP(gpm4-3, INPUT, DOWN);
1186		PIN_SLP(gpm4-4, INPUT, DOWN);
1187		PIN_SLP(gpm4-5, INPUT, DOWN);
1188		PIN_SLP(gpm4-6, INPUT, DOWN);
1189		PIN_SLP(gpm4-7, INPUT, DOWN);
1190
1191		PIN_SLP(gpy0-0, INPUT, DOWN);
1192		PIN_SLP(gpy0-1, INPUT, DOWN);
1193		PIN_SLP(gpy0-2, INPUT, DOWN);
1194		PIN_SLP(gpy0-3, INPUT, DOWN);
1195		PIN_SLP(gpy0-4, INPUT, DOWN);
1196		PIN_SLP(gpy0-5, INPUT, DOWN);
1197
1198		PIN_SLP(gpy1-0, INPUT, DOWN);
1199		PIN_SLP(gpy1-1, INPUT, DOWN);
1200		PIN_SLP(gpy1-2, INPUT, DOWN);
1201		PIN_SLP(gpy1-3, INPUT, DOWN);
1202
1203		PIN_SLP(gpy2-0, PREV, NONE);
1204		PIN_SLP(gpy2-1, INPUT, DOWN);
1205		PIN_SLP(gpy2-2, INPUT, NONE);
1206		PIN_SLP(gpy2-3, INPUT, NONE);
1207		PIN_SLP(gpy2-4, INPUT, NONE);
1208		PIN_SLP(gpy2-5, INPUT, NONE);
1209
1210		PIN_SLP(gpy3-0, INPUT, DOWN);
1211		PIN_SLP(gpy3-1, INPUT, DOWN);
1212		PIN_SLP(gpy3-2, INPUT, DOWN);
1213		PIN_SLP(gpy3-3, INPUT, DOWN);
1214		PIN_SLP(gpy3-4, INPUT, DOWN);
1215		PIN_SLP(gpy3-5, INPUT, DOWN);
1216		PIN_SLP(gpy3-6, INPUT, DOWN);
1217		PIN_SLP(gpy3-7, INPUT, DOWN);
1218
1219		PIN_SLP(gpy4-0, INPUT, DOWN);
1220		PIN_SLP(gpy4-1, INPUT, DOWN);
1221		PIN_SLP(gpy4-2, INPUT, DOWN);
1222		PIN_SLP(gpy4-3, INPUT, DOWN);
1223		PIN_SLP(gpy4-4, INPUT, DOWN);
1224		PIN_SLP(gpy4-5, INPUT, DOWN);
1225		PIN_SLP(gpy4-6, INPUT, DOWN);
1226		PIN_SLP(gpy4-7, INPUT, DOWN);
1227
1228		PIN_SLP(gpy5-0, INPUT, DOWN);
1229		PIN_SLP(gpy5-1, INPUT, DOWN);
1230		PIN_SLP(gpy5-2, INPUT, DOWN);
1231		PIN_SLP(gpy5-3, INPUT, DOWN);
1232		PIN_SLP(gpy5-4, INPUT, DOWN);
1233		PIN_SLP(gpy5-5, INPUT, DOWN);
1234		PIN_SLP(gpy5-6, INPUT, DOWN);
1235		PIN_SLP(gpy5-7, INPUT, DOWN);
1236
1237		PIN_SLP(gpy6-0, INPUT, DOWN);
1238		PIN_SLP(gpy6-1, INPUT, DOWN);
1239		PIN_SLP(gpy6-2, INPUT, DOWN);
1240		PIN_SLP(gpy6-3, INPUT, DOWN);
1241		PIN_SLP(gpy6-4, INPUT, DOWN);
1242		PIN_SLP(gpy6-5, INPUT, DOWN);
1243		PIN_SLP(gpy6-6, INPUT, DOWN);
1244		PIN_SLP(gpy6-7, INPUT, DOWN);
1245	};
1246};
1247
1248&pinctrl_2 {
1249	pinctrl-names = "default";
1250	pinctrl-0 = <&sleep2>;
1251
1252	sleep2: sleep-states {
1253		PIN_SLP(gpz-0, INPUT, DOWN);
1254		PIN_SLP(gpz-1, INPUT, DOWN);
1255		PIN_SLP(gpz-2, INPUT, DOWN);
1256		PIN_SLP(gpz-3, INPUT, DOWN);
1257		PIN_SLP(gpz-4, INPUT, DOWN);
1258		PIN_SLP(gpz-5, INPUT, DOWN);
1259		PIN_SLP(gpz-6, INPUT, DOWN);
1260	};
1261};
1262
1263&pinctrl_3 {
1264	pinctrl-names = "default";
1265	pinctrl-0 = <&sleep3>;
1266
1267	sleep3: sleep-states {
1268		PIN_SLP(gpv0-0, INPUT, DOWN);
1269		PIN_SLP(gpv0-1, INPUT, DOWN);
1270		PIN_SLP(gpv0-2, INPUT, DOWN);
1271		PIN_SLP(gpv0-3, INPUT, DOWN);
1272		PIN_SLP(gpv0-4, INPUT, DOWN);
1273		PIN_SLP(gpv0-5, INPUT, DOWN);
1274		PIN_SLP(gpv0-6, INPUT, DOWN);
1275		PIN_SLP(gpv0-7, INPUT, DOWN);
1276
1277		PIN_SLP(gpv1-0, INPUT, DOWN);
1278		PIN_SLP(gpv1-1, INPUT, DOWN);
1279		PIN_SLP(gpv1-2, INPUT, DOWN);
1280		PIN_SLP(gpv1-3, INPUT, DOWN);
1281		PIN_SLP(gpv1-4, INPUT, DOWN);
1282		PIN_SLP(gpv1-5, INPUT, DOWN);
1283		PIN_SLP(gpv1-6, INPUT, DOWN);
1284		PIN_SLP(gpv1-7, INPUT, DOWN);
1285
1286		PIN_SLP(gpv2-0, INPUT, DOWN);
1287		PIN_SLP(gpv2-1, INPUT, DOWN);
1288		PIN_SLP(gpv2-2, INPUT, DOWN);
1289		PIN_SLP(gpv2-3, INPUT, DOWN);
1290		PIN_SLP(gpv2-4, INPUT, DOWN);
1291		PIN_SLP(gpv2-5, INPUT, DOWN);
1292		PIN_SLP(gpv2-6, INPUT, DOWN);
1293		PIN_SLP(gpv2-7, INPUT, DOWN);
1294
1295		PIN_SLP(gpv3-0, INPUT, DOWN);
1296		PIN_SLP(gpv3-1, INPUT, DOWN);
1297		PIN_SLP(gpv3-2, INPUT, DOWN);
1298		PIN_SLP(gpv3-3, INPUT, DOWN);
1299		PIN_SLP(gpv3-4, INPUT, DOWN);
1300		PIN_SLP(gpv3-5, INPUT, DOWN);
1301		PIN_SLP(gpv3-6, INPUT, DOWN);
1302		PIN_SLP(gpv3-7, INPUT, DOWN);
1303
1304		PIN_SLP(gpv4-0, INPUT, DOWN);
1305	};
1306};
1307