1/*
2 * Device tree for Energy Micro EFM32 Giant Gecko SoC.
3 *
4 * Documentation available from
5 * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
6 */
7#include "armv7-m.dtsi"
8#include "dt-bindings/clock/efm32-cmu.h"
9
10/ {
11	aliases {
12		i2c0 = &i2c0;
13		i2c1 = &i2c1;
14		serial0 = &uart0;
15		serial1 = &uart1;
16		serial2 = &uart2;
17		serial3 = &uart3;
18		serial4 = &uart4;
19		spi0 = &spi0;
20		spi1 = &spi1;
21		spi2 = &spi2;
22	};
23
24	soc {
25		adc: adc@40002000 {
26			compatible = "efm32,adc";
27			reg = <0x40002000 0x400>;
28			interrupts = <7>;
29			clocks = <&cmu clk_HFPERCLKADC0>;
30			status = "disabled";
31		};
32
33		gpio: gpio@40006000 {
34			compatible = "efm32,gpio";
35			reg = <0x40006000 0x1000>;
36			interrupts = <1 11>;
37			gpio-controller;
38			#gpio-cells = <2>;
39			interrupt-controller;
40			#interrupt-cells = <1>;
41			clocks = <&cmu clk_HFPERCLKGPIO>;
42			status = "ok";
43		};
44
45		i2c0: i2c@4000a000 {
46			#address-cells = <1>;
47			#size-cells = <0>;
48			compatible = "efm32,i2c";
49			reg = <0x4000a000 0x400>;
50			interrupts = <9>;
51			clocks = <&cmu clk_HFPERCLKI2C0>;
52			clock-frequency = <100000>;
53			status = "disabled";
54		};
55
56		i2c1: i2c@4000a400 {
57			#address-cells = <1>;
58			#size-cells = <0>;
59			compatible = "efm32,i2c";
60			reg = <0x4000a400 0x400>;
61			interrupts = <10>;
62			clocks = <&cmu clk_HFPERCLKI2C1>;
63			clock-frequency = <100000>;
64			status = "disabled";
65		};
66
67		spi0: spi@4000c000 { /* USART0 */
68			#address-cells = <1>;
69			#size-cells = <0>;
70			compatible = "efm32,spi";
71			reg = <0x4000c000 0x400>;
72			interrupts = <3 4>;
73			clocks = <&cmu clk_HFPERCLKUSART0>;
74			status = "disabled";
75		};
76
77		spi1: spi@4000c400 { /* USART1 */
78			#address-cells = <1>;
79			#size-cells = <0>;
80			compatible = "efm32,spi";
81			reg = <0x4000c400 0x400>;
82			interrupts = <15 16>;
83			clocks = <&cmu clk_HFPERCLKUSART1>;
84			status = "disabled";
85		};
86
87		spi2: spi@4000c800 { /* USART2 */
88			#address-cells = <1>;
89			#size-cells = <0>;
90			compatible = "efm32,spi";
91			reg = <0x4000c800 0x400>;
92			interrupts = <18 19>;
93			clocks = <&cmu clk_HFPERCLKUSART2>;
94			status = "disabled";
95		};
96
97		uart0: uart@4000c000 { /* USART0 */
98			compatible = "efm32,uart";
99			reg = <0x4000c000 0x400>;
100			interrupts = <3 4>;
101			clocks = <&cmu clk_HFPERCLKUSART0>;
102			status = "disabled";
103		};
104
105		uart1: uart@4000c400 { /* USART1 */
106			compatible = "efm32,uart";
107			reg = <0x4000c400 0x400>;
108			interrupts = <15 16>;
109			clocks = <&cmu clk_HFPERCLKUSART1>;
110			status = "disabled";
111		};
112
113		uart2: uart@4000c800 { /* USART2 */
114			compatible = "efm32,uart";
115			reg = <0x4000c800 0x400>;
116			interrupts = <18 19>;
117			clocks = <&cmu clk_HFPERCLKUSART2>;
118			status = "disabled";
119		};
120
121		uart3: uart@4000e000 { /* UART0 */
122			compatible = "efm32,uart";
123			reg = <0x4000e000 0x400>;
124			interrupts = <20 21>;
125			clocks = <&cmu clk_HFPERCLKUART0>;
126			status = "disabled";
127		};
128
129		uart4: uart@4000e400 { /* UART1 */
130			compatible = "efm32,uart";
131			reg = <0x4000e400 0x400>;
132			interrupts = <22 23>;
133			clocks = <&cmu clk_HFPERCLKUART1>;
134			status = "disabled";
135		};
136
137		timer0: timer@40010000 {
138			compatible = "efm32,timer";
139			reg = <0x40010000 0x400>;
140			interrupts = <2>;
141			clocks = <&cmu clk_HFPERCLKTIMER0>;
142		};
143
144		timer1: timer@40010400 {
145			compatible = "efm32,timer";
146			reg = <0x40010400 0x400>;
147			interrupts = <12>;
148			clocks = <&cmu clk_HFPERCLKTIMER1>;
149		};
150
151		timer2: timer@40010800 {
152			compatible = "efm32,timer";
153			reg = <0x40010800 0x400>;
154			interrupts = <13>;
155			clocks = <&cmu clk_HFPERCLKTIMER2>;
156		};
157
158		timer3: timer@40010c00 {
159			compatible = "efm32,timer";
160			reg = <0x40010c00 0x400>;
161			interrupts = <14>;
162			clocks = <&cmu clk_HFPERCLKTIMER3>;
163		};
164
165		cmu: cmu@400c8000 {
166			compatible = "efm32gg,cmu";
167			reg = <0x400c8000 0x400>;
168			interrupts = <32>;
169			#clock-cells = <1>;
170		};
171	};
172};
173