1/* 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 */ 8 9/* AM437x GP EVM */ 10 11/dts-v1/; 12 13#include "am4372.dtsi" 14#include <dt-bindings/pinctrl/am43xx.h> 15#include <dt-bindings/pwm/pwm.h> 16#include <dt-bindings/gpio/gpio.h> 17 18/ { 19 model = "TI AM437x GP EVM"; 20 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; 21 22 aliases { 23 display0 = &lcd0; 24 }; 25 26 vmmcsd_fixed: fixedregulator-sd { 27 compatible = "regulator-fixed"; 28 regulator-name = "vmmcsd_fixed"; 29 regulator-min-microvolt = <3300000>; 30 regulator-max-microvolt = <3300000>; 31 enable-active-high; 32 }; 33 34 vtt_fixed: fixedregulator-vtt { 35 compatible = "regulator-fixed"; 36 regulator-name = "vtt_fixed"; 37 regulator-min-microvolt = <1500000>; 38 regulator-max-microvolt = <1500000>; 39 regulator-always-on; 40 regulator-boot-on; 41 enable-active-high; 42 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; 43 }; 44 45 backlight { 46 compatible = "pwm-backlight"; 47 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 48 brightness-levels = <0 51 53 56 62 75 101 152 255>; 49 default-brightness-level = <8>; 50 }; 51 52 matrix_keypad: matrix_keypad@0 { 53 compatible = "gpio-matrix-keypad"; 54 debounce-delay-ms = <5>; 55 col-scan-delay-us = <2>; 56 57 row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ 58 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ 59 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ 60 61 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */ 62 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */ 63 64 linux,keymap = <0x00000201 /* P1 */ 65 0x00010202 /* P2 */ 66 0x01000067 /* UP */ 67 0x0101006a /* RIGHT */ 68 0x02000069 /* LEFT */ 69 0x0201006c>; /* DOWN */ 70 }; 71 72 lcd0: display { 73 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; 74 label = "lcd"; 75 76 pinctrl-names = "default"; 77 pinctrl-0 = <&lcd_pins>; 78 79 /* 80 * SelLCDorHDMI, LOW to select HDMI. This is not really the 81 * panel's enable GPIO, but we don't have HDMI driver support nor 82 * support to switch between two displays, so using this gpio as 83 * panel's enable should be safe. 84 */ 85 enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; 86 87 panel-timing { 88 clock-frequency = <33000000>; 89 hactive = <800>; 90 vactive = <480>; 91 hfront-porch = <210>; 92 hback-porch = <16>; 93 hsync-len = <30>; 94 vback-porch = <10>; 95 vfront-porch = <22>; 96 vsync-len = <13>; 97 hsync-active = <0>; 98 vsync-active = <0>; 99 de-active = <1>; 100 pixelclk-active = <1>; 101 }; 102 103 port { 104 lcd_in: endpoint { 105 remote-endpoint = <&dpi_out>; 106 }; 107 }; 108 }; 109}; 110 111&am43xx_pinmux { 112 i2c0_pins: i2c0_pins { 113 pinctrl-single,pins = < 114 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 115 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 116 >; 117 }; 118 119 i2c1_pins: i2c1_pins { 120 pinctrl-single,pins = < 121 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ 122 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ 123 >; 124 }; 125 126 mmc1_pins: pinmux_mmc1_pins { 127 pinctrl-single,pins = < 128 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 129 >; 130 }; 131 132 ecap0_pins: backlight_pins { 133 pinctrl-single,pins = < 134 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ 135 >; 136 }; 137 138 pixcir_ts_pins: pixcir_ts_pins { 139 pinctrl-single,pins = < 140 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ 141 >; 142 }; 143 144 cpsw_default: cpsw_default { 145 pinctrl-single,pins = < 146 /* Slave 1 */ 147 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ 148 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ 149 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ 150 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ 151 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ 152 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ 153 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ 154 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ 155 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ 156 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ 157 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ 158 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ 159 >; 160 }; 161 162 cpsw_sleep: cpsw_sleep { 163 pinctrl-single,pins = < 164 /* Slave 1 reset value */ 165 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) 166 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) 167 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) 168 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) 169 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) 170 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) 171 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) 172 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) 173 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) 174 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) 175 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) 176 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) 177 >; 178 }; 179 180 davinci_mdio_default: davinci_mdio_default { 181 pinctrl-single,pins = < 182 /* MDIO */ 183 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 184 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 185 >; 186 }; 187 188 davinci_mdio_sleep: davinci_mdio_sleep { 189 pinctrl-single,pins = < 190 /* MDIO reset value */ 191 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) 192 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) 193 >; 194 }; 195 196 nand_flash_x8: nand_flash_x8 { 197 pinctrl-single,pins = < 198 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ 199 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 200 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 201 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ 202 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ 203 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ 204 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ 205 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ 206 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ 207 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ 208 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ 209 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ 210 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ 211 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ 212 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ 213 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ 214 >; 215 }; 216 217 dss_pins: dss_pins { 218 pinctrl-single,pins = < 219 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ 220 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) 221 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) 222 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) 223 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) 224 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) 225 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) 226 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ 227 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ 228 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 229 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 230 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) 231 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) 232 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 233 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 234 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) 235 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) 236 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 237 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 238 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) 239 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) 240 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) 241 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) 242 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ 243 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ 244 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ 245 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ 246 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ 247 248 >; 249 }; 250 251 lcd_pins: lcd_pins { 252 pinctrl-single,pins = < 253 /* GPIO 5_8 to select LCD / HDMI */ 254 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) 255 >; 256 }; 257 258 dcan0_default: dcan0_default_pins { 259 pinctrl-single,pins = < 260 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ 261 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ 262 >; 263 }; 264 265 dcan1_default: dcan1_default_pins { 266 pinctrl-single,pins = < 267 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ 268 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ 269 >; 270 }; 271 272 vpfe0_pins_default: vpfe0_pins_default { 273 pinctrl-single,pins = < 274 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ 275 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ 276 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ 277 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ 278 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ 279 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ 280 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ 281 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ 282 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ 283 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ 284 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ 285 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ 286 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ 287 >; 288 }; 289 290 vpfe0_pins_sleep: vpfe0_pins_sleep { 291 pinctrl-single,pins = < 292 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ 293 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ 294 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ 295 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ 296 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ 297 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ 298 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ 299 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ 300 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ 301 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ 302 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ 303 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ 304 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ 305 >; 306 }; 307 308 vpfe1_pins_default: vpfe1_pins_default { 309 pinctrl-single,pins = < 310 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ 311 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ 312 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ 313 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ 314 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ 315 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ 316 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ 317 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ 318 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ 319 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ 320 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ 321 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ 322 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ 323 >; 324 }; 325 326 vpfe1_pins_sleep: vpfe1_pins_sleep { 327 pinctrl-single,pins = < 328 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ 329 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ 330 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ 331 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ 332 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ 333 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ 334 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ 335 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ 336 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ 337 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ 338 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ 339 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ 340 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ 341 >; 342 }; 343}; 344 345&i2c0 { 346 status = "okay"; 347 pinctrl-names = "default"; 348 pinctrl-0 = <&i2c0_pins>; 349 clock-frequency = <100000>; 350 351 tps65218: tps65218@24 { 352 reg = <0x24>; 353 compatible = "ti,tps65218"; 354 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ 355 interrupt-controller; 356 #interrupt-cells = <2>; 357 358 dcdc1: regulator-dcdc1 { 359 compatible = "ti,tps65218-dcdc1"; 360 regulator-name = "vdd_core"; 361 regulator-min-microvolt = <912000>; 362 regulator-max-microvolt = <1144000>; 363 regulator-boot-on; 364 regulator-always-on; 365 }; 366 367 dcdc2: regulator-dcdc2 { 368 compatible = "ti,tps65218-dcdc2"; 369 regulator-name = "vdd_mpu"; 370 regulator-min-microvolt = <912000>; 371 regulator-max-microvolt = <1378000>; 372 regulator-boot-on; 373 regulator-always-on; 374 }; 375 376 dcdc3: regulator-dcdc3 { 377 compatible = "ti,tps65218-dcdc3"; 378 regulator-name = "vdcdc3"; 379 regulator-min-microvolt = <1500000>; 380 regulator-max-microvolt = <1500000>; 381 regulator-boot-on; 382 regulator-always-on; 383 }; 384 dcdc5: regulator-dcdc5 { 385 compatible = "ti,tps65218-dcdc5"; 386 regulator-name = "v1_0bat"; 387 regulator-min-microvolt = <1000000>; 388 regulator-max-microvolt = <1000000>; 389 }; 390 391 dcdc6: regulator-dcdc6 { 392 compatible = "ti,tps65218-dcdc6"; 393 regulator-name = "v1_8bat"; 394 regulator-min-microvolt = <1800000>; 395 regulator-max-microvolt = <1800000>; 396 }; 397 398 ldo1: regulator-ldo1 { 399 compatible = "ti,tps65218-ldo1"; 400 regulator-min-microvolt = <1800000>; 401 regulator-max-microvolt = <1800000>; 402 regulator-boot-on; 403 regulator-always-on; 404 }; 405 }; 406}; 407 408&i2c1 { 409 status = "okay"; 410 pinctrl-names = "default"; 411 pinctrl-0 = <&i2c1_pins>; 412 pixcir_ts@5c { 413 compatible = "pixcir,pixcir_tangoc"; 414 pinctrl-names = "default"; 415 pinctrl-0 = <&pixcir_ts_pins>; 416 reg = <0x5c>; 417 interrupt-parent = <&gpio3>; 418 interrupts = <22 0>; 419 420 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 421 422 touchscreen-size-x = <1024>; 423 touchscreen-size-y = <600>; 424 }; 425}; 426 427&epwmss0 { 428 status = "okay"; 429}; 430 431&tscadc { 432 status = "okay"; 433 434 adc { 435 ti,adc-channels = <0 1 2 3 4 5 6 7>; 436 }; 437}; 438 439&ecap0 { 440 status = "okay"; 441 pinctrl-names = "default"; 442 pinctrl-0 = <&ecap0_pins>; 443}; 444 445&gpio0 { 446 status = "okay"; 447}; 448 449&gpio3 { 450 status = "okay"; 451}; 452 453&gpio4 { 454 status = "okay"; 455}; 456 457&gpio5 { 458 status = "okay"; 459 ti,no-reset-on-init; 460}; 461 462&mmc1 { 463 status = "okay"; 464 vmmc-supply = <&vmmcsd_fixed>; 465 bus-width = <4>; 466 pinctrl-names = "default"; 467 pinctrl-0 = <&mmc1_pins>; 468 cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; 469}; 470 471&usb2_phy1 { 472 status = "okay"; 473}; 474 475&usb1 { 476 dr_mode = "peripheral"; 477 status = "okay"; 478}; 479 480&usb2_phy2 { 481 status = "okay"; 482}; 483 484&usb2 { 485 dr_mode = "host"; 486 status = "okay"; 487}; 488 489&mac { 490 slaves = <1>; 491 pinctrl-names = "default", "sleep"; 492 pinctrl-0 = <&cpsw_default>; 493 pinctrl-1 = <&cpsw_sleep>; 494 status = "okay"; 495}; 496 497&davinci_mdio { 498 pinctrl-names = "default", "sleep"; 499 pinctrl-0 = <&davinci_mdio_default>; 500 pinctrl-1 = <&davinci_mdio_sleep>; 501 status = "okay"; 502}; 503 504&cpsw_emac0 { 505 phy_id = <&davinci_mdio>, <0>; 506 phy-mode = "rgmii"; 507}; 508 509&elm { 510 status = "okay"; 511}; 512 513&gpmc { 514 status = "okay"; 515 pinctrl-names = "default"; 516 pinctrl-0 = <&nand_flash_x8>; 517 ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ 518 nand@0,0 { 519 reg = <0 0 4>; /* device IO registers */ 520 ti,nand-ecc-opt = "bch16"; 521 ti,elm-id = <&elm>; 522 nand-bus-width = <8>; 523 gpmc,device-width = <1>; 524 gpmc,sync-clk-ps = <0>; 525 gpmc,cs-on-ns = <0>; 526 gpmc,cs-rd-off-ns = <40>; 527 gpmc,cs-wr-off-ns = <40>; 528 gpmc,adv-on-ns = <0>; 529 gpmc,adv-rd-off-ns = <25>; 530 gpmc,adv-wr-off-ns = <25>; 531 gpmc,we-on-ns = <0>; 532 gpmc,we-off-ns = <20>; 533 gpmc,oe-on-ns = <3>; 534 gpmc,oe-off-ns = <30>; 535 gpmc,access-ns = <30>; 536 gpmc,rd-cycle-ns = <40>; 537 gpmc,wr-cycle-ns = <40>; 538 gpmc,wait-pin = <0>; 539 gpmc,bus-turnaround-ns = <0>; 540 gpmc,cycle2cycle-delay-ns = <0>; 541 gpmc,clk-activation-ns = <0>; 542 gpmc,wait-monitoring-ns = <0>; 543 gpmc,wr-access-ns = <40>; 544 gpmc,wr-data-mux-bus-ns = <0>; 545 /* MTD partition table */ 546 /* All SPL-* partitions are sized to minimal length 547 * which can be independently programmable. For 548 * NAND flash this is equal to size of erase-block */ 549 #address-cells = <1>; 550 #size-cells = <1>; 551 partition@0 { 552 label = "NAND.SPL"; 553 reg = <0x00000000 0x00040000>; 554 }; 555 partition@1 { 556 label = "NAND.SPL.backup1"; 557 reg = <0x00040000 0x00040000>; 558 }; 559 partition@2 { 560 label = "NAND.SPL.backup2"; 561 reg = <0x00080000 0x00040000>; 562 }; 563 partition@3 { 564 label = "NAND.SPL.backup3"; 565 reg = <0x000c0000 0x00040000>; 566 }; 567 partition@4 { 568 label = "NAND.u-boot-spl-os"; 569 reg = <0x00100000 0x00080000>; 570 }; 571 partition@5 { 572 label = "NAND.u-boot"; 573 reg = <0x00180000 0x00100000>; 574 }; 575 partition@6 { 576 label = "NAND.u-boot-env"; 577 reg = <0x00280000 0x00040000>; 578 }; 579 partition@7 { 580 label = "NAND.u-boot-env.backup1"; 581 reg = <0x002c0000 0x00040000>; 582 }; 583 partition@8 { 584 label = "NAND.kernel"; 585 reg = <0x00300000 0x00700000>; 586 }; 587 partition@9 { 588 label = "NAND.file-system"; 589 reg = <0x00a00000 0x1f600000>; 590 }; 591 }; 592}; 593 594&dss { 595 status = "ok"; 596 597 pinctrl-names = "default"; 598 pinctrl-0 = <&dss_pins>; 599 600 port { 601 dpi_out: endpoint@0 { 602 remote-endpoint = <&lcd_in>; 603 data-lines = <24>; 604 }; 605 }; 606}; 607 608&dcan0 { 609 pinctrl-names = "default"; 610 pinctrl-0 = <&dcan0_default>; 611 status = "okay"; 612}; 613 614&dcan1 { 615 pinctrl-names = "default"; 616 pinctrl-0 = <&dcan1_default>; 617 status = "okay"; 618}; 619 620&vpfe0 { 621 status = "okay"; 622 pinctrl-names = "default", "sleep"; 623 pinctrl-0 = <&vpfe0_pins_default>; 624 pinctrl-1 = <&vpfe0_pins_sleep>; 625 626 port { 627 vpfe0_ep: endpoint { 628 /* remote-endpoint = <&sensor>; add once we have it */ 629 ti,am437x-vpfe-interface = <0>; 630 bus-width = <8>; 631 hsync-active = <0>; 632 vsync-active = <0>; 633 }; 634 }; 635}; 636 637&vpfe1 { 638 status = "okay"; 639 pinctrl-names = "default", "sleep"; 640 pinctrl-0 = <&vpfe1_pins_default>; 641 pinctrl-1 = <&vpfe1_pins_sleep>; 642 643 port { 644 vpfe1_ep: endpoint { 645 /* remote-endpoint = <&sensor>; add once we have it */ 646 ti,am437x-vpfe-interface = <0>; 647 bus-width = <8>; 648 hsync-active = <0>; 649 vsync-active = <0>; 650 }; 651 }; 652}; 653