1Texas Instruments OMAP3 Display Subsystem
2=========================================
3
4See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
5description about OMAP Display Subsystem bindings.
6
7DSS Core
8--------
9
10Required properties:
11- compatible: "ti,omap3-dss"
12- reg: address and length of the register space
13- ti,hwmods: "dss_core"
14- clocks: handle to fclk
15- clock-names: "fck"
16
17Optional nodes:
18- Video ports:
19	- Port 0: DPI output
20	- Port 1: SDI output
21
22DPI Endpoint required properties:
23- data-lines: number of lines used
24
25SDI Endpoint required properties:
26- datapairs: number of datapairs used
27
28
29DISPC
30-----
31
32Required properties:
33- compatible: "ti,omap3-dispc"
34- reg: address and length of the register space
35- ti,hwmods: "dss_dispc"
36- interrupts: the DISPC interrupt
37- clocks: handle to fclk
38- clock-names: "fck"
39
40
41RFBI
42----
43
44Required properties:
45- compatible: "ti,omap3-rfbi"
46- reg: address and length of the register space
47- ti,hwmods: "dss_rfbi"
48- clocks: handles to fclk and iclk
49- clock-names: "fck", "ick"
50
51
52VENC
53----
54
55Required properties:
56- compatible: "ti,omap3-venc"
57- reg: address and length of the register space
58- ti,hwmods: "dss_venc"
59- vdda-supply: power supply for DAC
60- clocks: handle to fclk
61- clock-names: "fck"
62
63VENC Endpoint required properties:
64- ti,invert-polarity: invert the polarity of the video signal
65- ti,channels: 1 for composite, 2 for s-video
66
67
68DSI
69---
70
71Required properties:
72- compatible: "ti,omap3-dsi"
73- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
74- reg-names: "proto", "phy", "pll"
75- interrupts: the DSI interrupt line
76- ti,hwmods: "dss_dsi1"
77- vdd-supply: power supply for DSI
78- clocks: handles to fclk and pll clock
79- clock-names: "fck", "sys_clk"
80
81DSI Endpoint required properties:
82- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
83  DATA1+, DATA1-, ...
84