1NVIDIA Tegra30 HDA controller
2
3Required properties:
4- compatible : For Tegra30, must contain "nvidia,tegra30-hda".  Otherwise,
5  must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is
6  tegra114, tegra124, or tegra132.
7- reg : Should contain the HDA registers location and length.
8- interrupts : The interrupt from the HDA controller.
9- clocks : Must contain an entry for each required entry in clock-names.
10  See ../clocks/clock-bindings.txt for details.
11- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
12- resets : Must contain an entry for each entry in reset-names.
13  See ../reset/reset.txt for details.
14- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
15
16Example:
17
18hda@0,70030000 {
19	compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
20	reg = <0x0 0x70030000 0x0 0x10000>;
21	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
22	clocks = <&tegra_car TEGRA124_CLK_HDA>,
23		 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
24		 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
25	clock-names = "hda", "hda2hdmi", "hda2codec_2x";
26	resets = <&tegra_car 125>, /* hda */
27		 <&tegra_car 128>; /* hda2hdmi */
28		 <&tegra_car 111>, /* hda2codec_2x */
29	reset-names = "hda", "hda2hdmi", "hda2codec_2x";
30};
31