1MPC5121 PSC Device Tree Bindings
2
3PSC in UART mode
4----------------
5
6For PSC in UART mode the needed PSC serial devices
7are specified by fsl,mpc5121-psc-uart nodes in the
8fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
9Controller node fsl,mpc5121-psc-fifo is requered there:
10
11fsl,mpc5121-psc-uart nodes
12--------------------------
13
14Required properties :
15 - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
16 - cell-index : Index of the PSC in hardware
17 - reg : Offset and length of the register set for the PSC device
18 - interrupts : <a b> where a is the interrupt number of the
19   PSC FIFO Controller and b is a field that represents an
20   encoding of the sense and level information for the interrupt.
21 - interrupt-parent : the phandle for the interrupt controller that
22   services interrupts for this device.
23
24Recommended properties :
25 - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
26 - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
27
28
29fsl,mpc5121-psc-fifo node
30-------------------------
31
32Required properties :
33 - compatible : Should be "fsl,mpc5121-psc-fifo"
34 - reg : Offset and length of the register set for the PSC
35         FIFO Controller
36 - interrupts : <a b> where a is the interrupt number of the
37   PSC FIFO Controller and b is a field that represents an
38   encoding of the sense and level information for the interrupt.
39 - interrupt-parent : the phandle for the interrupt controller that
40   services interrupts for this device.
41
42
43Example for a board using PSC0 and PSC1 devices in serial mode:
44
45serial@11000 {
46	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
47	cell-index = <0>;
48	reg = <0x11000 0x100>;
49	interrupts = <40 0x8>;
50	interrupt-parent = < &ipic >;
51	fsl,rx-fifo-size = <16>;
52	fsl,tx-fifo-size = <16>;
53};
54
55serial@11100 {
56	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
57	cell-index = <1>;
58	reg = <0x11100 0x100>;
59	interrupts = <40 0x8>;
60	interrupt-parent = < &ipic >;
61	fsl,rx-fifo-size = <16>;
62	fsl,tx-fifo-size = <16>;
63};
64
65pscfifo@11f00 {
66	compatible = "fsl,mpc5121-psc-fifo";
67	reg = <0x11f00 0x100>;
68	interrupts = <40 0x8>;
69	interrupt-parent = < &ipic >;
70};
71