1* Broadcom iProc PCIe controller with the platform bus interface
2
3Required properties:
4- compatible: Must be "brcm,iproc-pcie"
5- reg: base address and length of the PCIe controller I/O register space
6- #interrupt-cells: set to <1>
7- interrupt-map-mask and interrupt-map, standard PCI properties to define the
8  mapping of the PCIe interface to interrupt numbers
9- linux,pci-domain: PCI domain ID. Should be unique for each host controller
10- bus-range: PCI bus numbers covered
11- #address-cells: set to <3>
12- #size-cells: set to <2>
13- device_type: set to "pci"
14- ranges: ranges for the PCI memory and I/O regions
15
16Optional properties:
17- phys: phandle of the PCIe PHY device
18- phy-names: must be "pcie-phy"
19
20Example:
21	pcie0: pcie@18012000 {
22		compatible = "brcm,iproc-pcie";
23		reg = <0x18012000 0x1000>;
24
25		#interrupt-cells = <1>;
26		interrupt-map-mask = <0 0 0 0>;
27		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
28
29		linux,pci-domain = <0>;
30
31		bus-range = <0x00 0xff>;
32
33		#address-cells = <3>;
34		#size-cells = <2>;
35		device_type = "pci";
36		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
37			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
38
39		phys = <&phy 0 5>;
40		phy-names = "pcie-phy";
41	};
42
43	pcie1: pcie@18013000 {
44		compatible = "brcm,iproc-pcie";
45		reg = <0x18013000 0x1000>;
46
47		#interrupt-cells = <1>;
48		interrupt-map-mask = <0 0 0 0>;
49		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
50
51		linux,pci-domain = <1>;
52
53		bus-range = <0x00 0xff>;
54
55		#address-cells = <3>;
56		#size-cells = <2>;
57		device_type = "pci";
58		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
59			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
60
61		phys = <&phy 1 6>;
62		phy-names = "pcie-phy";
63	};
64