1Broadcom BCM43xx Fullmac wireless SDIO devices
2
3This node provides properties for controlling the Broadcom wireless device. The
4node is expected to be specified as a child node to the SDIO controller that
5connects the device to the system.
6
7Required properties:
8
9 - compatible : Should be "brcm,bcm4329-fmac".
10
11Optional properties:
12 - brcm,drive-strength : drive strength used for SDIO pins on device in mA
13	(default = 6).
14 - interrupt-parent : the phandle for the interrupt controller to which the
15	device interrupts are connected.
16 - interrupts : specifies attributes for the out-of-band interrupt (host-wake).
17	When not specified the device will use in-band SDIO interrupts.
18 - interrupt-names : name of the out-of-band interrupt, which must be set
19	to "host-wake".
20
21Example:
22
23mmc3: mmc@01c12000 {
24	#address-cells = <1>;
25	#size-cells = <0>;
26
27	pinctrl-names = "default";
28	pinctrl-0 = <&mmc3_pins_a>;
29	vmmc-supply = <&reg_vmmc3>;
30	bus-width = <4>;
31	non-removable;
32	status = "okay";
33
34	brcmf: bcrmf@1 {
35		reg = <1>;
36		compatible = "brcm,bcm4329-fmac";
37		interrupt-parent = <&pio>;
38		interrupts = <10 8>; /* PH10 / EINT10 */
39		interrupt-names = "host-wake";
40	};
41};
42