1Hisilicon hix5hd2 gmac controller
2
3Required properties:
4- compatible: should be "hisilicon,hix5hd2-gmac".
5- reg: specifies base physical address(s) and size of the device registers.
6  The first region is the MAC register base and size.
7  The second region is external interface control register.
8- interrupts: should contain the MAC interrupt.
9- #address-cells: must be <1>.
10- #size-cells: must be <0>.
11- phy-mode: see ethernet.txt [1].
12- phy-handle: see ethernet.txt [1].
13- mac-address: see ethernet.txt [1].
14- clocks: clock phandle and specifier pair.
15
16- PHY subnode: inherits from phy binding [2]
17
18[1] Documentation/devicetree/bindings/net/ethernet.txt
19[2] Documentation/devicetree/bindings/net/phy.txt
20
21Example:
22	gmac0: ethernet@f9840000 {
23		compatible = "hisilicon,hix5hd2-gmac";
24		reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
25		interrupts = <0 71 4>;
26		#address-cells = <1>;
27		#size-cells = <0>;
28		phy-mode = "mii";
29		phy-handle = <&phy2>;
30		mac-address = [00 00 00 00 00 00];
31		clocks = <&clock HIX5HD2_MAC0_CLK>;
32
33		phy2: ethernet-phy@2 {
34			reg = <2>;
35		};
36	};
37