1NVIDIA Tegra MIPI pad calibration controller
2
3Required properties:
4- compatible: "nvidia,tegra<chip>-mipi"
5- reg: Physical base address and length of the controller's registers.
6- clocks: Must contain an entry for each entry in clock-names.
7  See ../clocks/clock-bindings.txt for details.
8- clock-names: Must include the following entries:
9  - mipi-cal
10- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
11  that need to be calibrated for a given device.
12
13User nodes need to contain an nvidia,mipi-calibrate property that has a
14phandle to refer to the calibration controller node and a bitmask of the pads
15that need to be calibrated.
16
17Example:
18
19	mipi: mipi@700e3000 {
20		compatible = "nvidia,tegra114-mipi";
21		reg = <0x700e3000 0x100>;
22		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
23		clock-names = "mipi-cal";
24		#nvidia,mipi-calibrate-cells = <1>;
25	};
26
27	...
28
29	host1x@50000000 {
30		...
31
32		dsi@54300000 {
33			...
34
35			nvidia,mipi-calibrate = <&mipi 0x060>;
36
37			...
38		};
39
40		...
41	};
42