1* Texas Instruments tsc2005 touchscreen controller
2
3Required properties:
4 - compatible		      : "ti,tsc2005"
5 - reg			      : SPI device address
6 - spi-max-frequency	      : Maximal SPI speed
7 - interrupts		      : IRQ specifier
8 - reset-gpios		      : GPIO specifier
9 - vio-supply                 : Regulator specifier
10
11Optional properties:
12 - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
13				in ohm (defaults to 280)
14 - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
15				the configured time (in milli seconds), the driver
16				will reset it. This is disabled by default.
17 - properties defined in touchscreen.txt
18
19Example:
20
21&mcspi1 {
22	tsc2005@0 {
23		compatible = "ti,tsc2005";
24		spi-max-frequency = <6000000>;
25		reg = <0>;
26
27		vio-supply = <&vio>;
28
29		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
30		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
31
32		touchscreen-fuzz-x = <4>;
33		touchscreen-fuzz-y = <7>;
34		touchscreen-fuzz-pressure = <2>;
35		touchscreen-size-x = <4096>;
36		touchscreen-size-y = <4096>;
37		touchscreen-max-pressure = <2048>;
38
39		ti,x-plate-ohms = <280>;
40		ti,esd-recovery-timeout-ms = <8000>;
41	};
42}
43