1* Marvell MMP I2C controller
2
3Required properties :
4
5 - reg : Offset and length of the register set for the device
6 - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
7   compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
8   For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
9   as shown in the example below.
10
11Recommended properties :
12
13 - interrupts : the interrupt number
14 - interrupt-parent : the phandle for the interrupt controller that
15   services interrupts for this device. If the parent is the default
16   interrupt controller in device tree, it could be ignored.
17 - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
18   status register of i2c controller instead.
19 - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
20
21Examples:
22	twsi1: i2c@d4011000 {
23		compatible = "mrvl,mmp-twsi";
24		reg = <0xd4011000 0x1000>;
25		interrupts = <7>;
26		mrvl,i2c-fast-mode;
27	};
28	
29	twsi2: i2c@d4025000 {
30		compatible = "mrvl,mmp-twsi";
31		reg = <0xd4025000 0x1000>;
32		interrupts = <58>;
33	};
34