1Freescale SoC SEC Security Engines versions 2.x-3.x 2 3Required properties: 4 5- compatible : Should contain entries for this and backward compatible 6 SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" 7- reg : Offset and length of the register set for the device 8- interrupts : the SEC's interrupt number 9- fsl,num-channels : An integer representing the number of channels 10 available. 11- fsl,channel-fifo-len : An integer representing the number of 12 descriptor pointers each channel fetch fifo can hold. 13- fsl,exec-units-mask : The bitmask representing what execution units 14 (EUs) are available. It's a single 32-bit cell. EU information 15 should be encoded following the SEC's Descriptor Header Dword 16 EU_SEL0 field documentation, i.e. as follows: 17 18 bit 0 = reserved - should be 0 19 bit 1 = set if SEC has the ARC4 EU (AFEU) 20 bit 2 = set if SEC has the DES/3DES EU (DEU) 21 bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A) 22 bit 4 = set if SEC has the random number generator EU (RNG) 23 bit 5 = set if SEC has the public key EU (PKEU) 24 bit 6 = set if SEC has the AES EU (AESU) 25 bit 7 = set if SEC has the Kasumi EU (KEU) 26 bit 8 = set if SEC has the CRC EU (CRCU) 27 bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B) 28 29remaining bits are reserved for future SEC EUs. 30 31- fsl,descriptor-types-mask : The bitmask representing what descriptors 32 are available. It's a single 32-bit cell. Descriptor type information 33 should be encoded following the SEC's Descriptor Header Dword DESC_TYPE 34 field documentation, i.e. as follows: 35 36 bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type 37 bit 1 = set if SEC supports the ipsec_esp descriptor type 38 bit 2 = set if SEC supports the common_nonsnoop desc. type 39 bit 3 = set if SEC supports the 802.11i AES ccmp desc. type 40 bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type 41 bit 5 = set if SEC supports the srtp descriptor type 42 bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type 43 bit 7 = set if SEC supports the pkeu_assemble descriptor type 44 bit 8 = set if SEC supports the aesu_key_expand_output desc.type 45 bit 9 = set if SEC supports the pkeu_ptmul descriptor type 46 bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type 47 bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type 48 49 ..and so on and so forth. 50 51Optional properties: 52 53- interrupt-parent : the phandle for the interrupt controller that 54 services interrupts for this device. 55 56Example: 57 58 /* MPC8548E */ 59 crypto@30000 { 60 compatible = "fsl,sec2.1", "fsl,sec2.0"; 61 reg = <0x30000 0x10000>; 62 interrupts = <29 2>; 63 interrupt-parent = <&mpic>; 64 fsl,num-channels = <4>; 65 fsl,channel-fifo-len = <24>; 66 fsl,exec-units-mask = <0xfe>; 67 fsl,descriptor-types-mask = <0x12b0ebf>; 68 }; 69