1* Clock bindings for CSR SiRFprimaII
2
3Required properties:
4- compatible: Should be "sirf,prima2-clkc"
5- reg: Address and length of the register set
6- interrupts: Should contain clock controller interrupt
7- #clock-cells: Should be <1>
8
9The clock consumer should specify the desired clock by having the clock
10ID in its "clocks" phandle cell.  The following is a full list of prima2
11clocks and IDs.
12
13	Clock			ID
14	---------------------------
15	rtc			0
16	osc             	1
17	pll1            	2
18	pll2            	3
19	pll3            	4
20	mem             	5
21	sys             	6
22	security        	7
23	dsp             	8
24	gps             	9
25	mf              	10
26	io              	11
27	cpu             	12
28	uart0           	13
29	uart1           	14
30	uart2           	15
31	tsc             	16
32	i2c0            	17
33	i2c1            	18
34	spi0            	19
35	spi1            	20
36	pwmc            	21
37	efuse           	22
38	pulse           	23
39	dmac0           	24
40	dmac1           	25
41	nand            	26
42	audio           	27
43	usp0            	28
44	usp1            	29
45	usp2            	30
46	vip             	31
47	gfx             	32
48	mm              	33
49	lcd             	34
50	vpp             	35
51	mmc01           	36
52	mmc23           	37
53	mmc45           	38
54	usbpll          	39
55	usb0            	40
56	usb1			41
57
58Examples:
59
60clks: clock-controller@88000000 {
61	compatible = "sirf,prima2-clkc";
62	reg = <0x88000000 0x1000>;
63	interrupts = <3>;
64	#clock-cells = <1>;
65};
66
67i2c0: i2c@b00e0000 {
68	cell-index = <0>;
69	compatible = "sirf,prima2-i2c";
70	reg = <0xb00e0000 0x10000>;
71	interrupts = <24>;
72	clocks = <&clks 17>;
73};
74