1* Clock bindings for Freescale i.MX6 Quad
2
3Required properties:
4- compatible: Should be "fsl,imx6q-ccm"
5- reg: Address and length of the register set
6- interrupts: Should contain CCM interrupt
7- #clock-cells: Should be <1>
8
9The clock consumer should specify the desired clock by having the clock
10ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
11for the full list of i.MX6 Quad and DualLite clock IDs.
12
13Examples:
14
15#include <dt-bindings/clock/imx6qdl-clock.h>
16
17clks: ccm@020c4000 {
18	compatible = "fsl,imx6q-ccm";
19	reg = <0x020c4000 0x4000>;
20	interrupts = <0 87 0x04 0 88 0x04>;
21	#clock-cells = <1>;
22};
23
24uart1: serial@02020000 {
25	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
26	reg = <0x02020000 0x4000>;
27	interrupts = <0 26 0x04>;
28	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
29	clock-names = "ipg", "per";
30	status = "disabled";
31};
32