1Freescale i.MX Platforms Device Tree Bindings 2----------------------------------------------- 3 4i.MX23 Evaluation Kit 5Required root node properties: 6 - compatible = "fsl,imx23-evk", "fsl,imx23"; 7 8i.MX25 Product Development Kit 9Required root node properties: 10 - compatible = "fsl,imx25-pdk", "fsl,imx25"; 11 12i.MX27 Product Development Kit 13Required root node properties: 14 - compatible = "fsl,imx27-pdk", "fsl,imx27"; 15 16i.MX28 Evaluation Kit 17Required root node properties: 18 - compatible = "fsl,imx28-evk", "fsl,imx28"; 19 20i.MX51 Babbage Board 21Required root node properties: 22 - compatible = "fsl,imx51-babbage", "fsl,imx51"; 23 24i.MX53 Automotive Reference Design Board 25Required root node properties: 26 - compatible = "fsl,imx53-ard", "fsl,imx53"; 27 28i.MX53 Evaluation Kit 29Required root node properties: 30 - compatible = "fsl,imx53-evk", "fsl,imx53"; 31 32i.MX53 Quick Start Board 33Required root node properties: 34 - compatible = "fsl,imx53-qsb", "fsl,imx53"; 35 36i.MX53 Smart Mobile Reference Design Board 37Required root node properties: 38 - compatible = "fsl,imx53-smd", "fsl,imx53"; 39 40i.MX6 Quad Armadillo2 Board 41Required root node properties: 42 - compatible = "fsl,imx6q-arm2", "fsl,imx6q"; 43 44i.MX6 Quad SABRE Lite Board 45Required root node properties: 46 - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; 47 48i.MX6 Quad SABRE Smart Device Board 49Required root node properties: 50 - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; 51 52i.MX6 Quad SABRE Automotive Board 53Required root node properties: 54 - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; 55 56Generic i.MX boards 57------------------- 58 59No iomux setup is done for these boards, so this must have been configured 60by the bootloader for boards to work with the generic bindings. 61 62i.MX27 generic board 63Required root node properties: 64 - compatible = "fsl,imx27"; 65 66i.MX51 generic board 67Required root node properties: 68 - compatible = "fsl,imx51"; 69 70i.MX53 generic board 71Required root node properties: 72 - compatible = "fsl,imx53"; 73 74i.MX6q generic board 75Required root node properties: 76 - compatible = "fsl,imx6q"; 77 78Freescale Vybrid Platform Device Tree Bindings 79---------------------------------------------- 80 81For the Vybrid SoC familiy all variants with DDR controller are supported, 82which is the VF5xx and VF6xx series. Out of historical reasons, in most 83places the kernel uses vf610 to refer to the whole familiy. 84 85Required root node compatible property (one of them): 86 - compatible = "fsl,vf500"; 87 - compatible = "fsl,vf510"; 88 - compatible = "fsl,vf600"; 89 - compatible = "fsl,vf610"; 90 91Freescale LS1021A Platform Device Tree Bindings 92------------------------------------------------ 93 94Required root node compatible properties: 95 - compatible = "fsl,ls1021a"; 96 97Freescale LS1021A SoC-specific Device Tree Bindings 98------------------------------------------- 99 100Freescale SCFG 101 SCFG is the supplemental configuration unit, that provides SoC specific 102configuration and status registers for the chip. Such as getting PEX port 103status. 104 Required properties: 105 - compatible: should be "fsl,ls1021a-scfg" 106 - reg: should contain base address and length of SCFG memory-mapped registers 107 108Example: 109 scfg: scfg@1570000 { 110 compatible = "fsl,ls1021a-scfg"; 111 reg = <0x0 0x1570000 0x0 0x10000>; 112 }; 113 114Freescale DCFG 115 DCFG is the device configuration unit, that provides general purpose 116configuration and status for the device. Such as setting the secondary 117core start address and release the secondary core from holdoff and startup. 118 Required properties: 119 - compatible: should be "fsl,ls1021a-dcfg" 120 - reg : should contain base address and length of DCFG memory-mapped registers 121 122Example: 123 dcfg: dcfg@1ee0000 { 124 compatible = "fsl,ls1021a-dcfg"; 125 reg = <0x0 0x1ee0000 0x0 0x10000>; 126 }; 127 128Freescale LS2085A SoC Device Tree Bindings 129------------------------------------------ 130 131LS2085A ARMv8 based Simulator model 132Required root node properties: 133 - compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; 134 135