1*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
2
3The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
4that measures approximately 2" square. It includes an Ethernet
5controller, an RS232-compatible serial port, a USB function port, and
6one CompactFlash+ slot on the back. Pictures can be found at the
7Intrinsyc website, http://www.intrinsyc.com.
8
9This document describes the support in the Linux kernel for the
10Intrinsyc CerfBoard.
11
12Supported in this version:
13   - CompactFlash+ slot (select PCMCIA in General Setup and any options
14     that may be required)
15   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
16     Network Devices)
17   - Serial ports with a serial console (hardcoded to 38400 8N1)
18
19In order to get this kernel onto your Cerf, you need a server that runs
20both BOOTP and TFTP. Detailed instructions should have come with your
21evaluation kit on how to use the bootloader. This series of commands
22will suffice:
23
24   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
25   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
26   make ARCH=arm CROSS_COMPILE=arm-linux- modules
27   cp arch/arm/boot/zImage <TFTP directory>
28
29support@intrinsyc.com
30